Thanks for sharing and just disregard negative reviews or comments I don't know what people have negative things to say when you just tried to help and give some information thanks from New York.
Best video example of a torch down install...quick, full of good tips, and the dude making the video is hillarious. Best analogies and comparisons...Like a Toyota and a Honda...same freakin car. LOL.
So I just got the same type of roofing put on bitumen Sbs Roofing and it is wavy it just got installed is there a way to fix it as long as it doesn't leak I have a 5 year warranty but I don't like the way it looks. Is there a way to fix it it doesn't look terrible but it definitely is an eyesore without removing everything I spent about 4,500 How can I fix it if there's a way I can send you an email let me know so I can show you
Hello Eric, that’s a great video. My husband was looking for the second part to see the torch. He wants to learn how to use the torch. I would like for you and him to talk. He is also Mexicano wey...
Andy hi we are repairing part of our roof. Just want to make sure that I’m understanding correctly. The BUR Cap Sheet is torched down right? Then would the white coat go on top of that?
I have a question Can you lay the underlayment over an existing torch down sheets? It was a section and added a new room and want to match the color for both as well as adding more protection. Thanks
muy bien guey, ya no le digas a luicito que se veltie, jajaja. couple of questions if I may, 1. why do you have to start with 1/2 strips on the edge? 2. does the drip edge go over or under the felt (underlayment)? any and all information is greatly appreciated. thank you
it goes over the base sheet ,not felt ok? if you don't use smooth over base , you have to apply roof cement under the edge metal before installing over the base sheet, I start with have to brake the overlap since i'm going to start with a full roll of torch, I have to make sure the end of the roll end in the center of the base sheet to prevent any flame to go underneath the base and cause a fire .
eric echale unbistaso al. guero de true american roofing mira. como pone la antorcha. gracias a este wey sale mucho jale mandale al chapin que lede claces
Edwin Carranza ...si lo he visto al guero ese, pero la verdad no me gusta criticarlo, a veces si me hace enojar cuando pone el valley metal sobre el plywood y encima el papel
How to nail base sheet every 2 feet and then continue to nail every 2 feet, where did you find the help.? Do it right the 1st time. Mexican crews throw the job together and want paid,never come back if there is a leak. I dont hire them anymore,gave me a bad name on some jobs. No mas!
once,again a sabb shop. when u nail base 18 inches on center 2 rolls in middle sheet and 12 on center on lap. didnt c them torch on this video i bet they dont use pull sticks. let union roofers show them how. union roofers kick ass local 153
Really. Thats your response? Once again it shows your level of ignorance and incompetence. Why comment at all? There are millions that blab and blab and thats all there good for. But there is only a few that produce and actually post video's. Come on just make a video and post it. The guy (eric garcia) in these videos does it out of the blue and on the fly. And not just one video but in fact many, and there a very few tradesman that are brave enough to do that. My hat goes off to eric garcia that made this video. Great job keep it up.
Please, no more videos. I've been roofing for 40 yrs and still I see you and many others that think that they are doing the right things and it makes me sick. It's roofers like you that make me feel that I'm glad that my days as a roofer is coming to an end. Go back home.
Thanks for sharing and just disregard negative reviews or comments I don't know what people have negative things to say when you just tried to help and give some information thanks from New York.
Mike Blake the people talkin shit either have little work coming in or arent even roofers..just trolls
Who knew roofing could be so interesting.
Thanks again.
Great video. Very well described
Best video example of a torch down install...quick, full of good tips, and the dude making the video is hillarious. Best analogies and comparisons...Like a Toyota and a Honda...same freakin car. LOL.
Do you know if you are supposed to torch down the base to stretch it?
very helpful and look foward to more videos....
So I just got the same type of roofing put on bitumen Sbs Roofing and it is wavy it just got installed is there a way to fix it as long as it doesn't leak I have a 5 year warranty but I don't like the way it looks. Is there a way to fix it it doesn't look terrible but it definitely is an eyesore without removing everything I spent about 4,500 How can I fix it if there's a way I can send you an email let me know so I can show you
No Way or No,
Buey! -- Too funny.
I like the magnetic hammer.
izbavynasotlukavago magic hammers are for pussies that cant nail fast
@@wscraney "magic hammers are for pussies that cant nail fast" -said the pussy
Hello Eric, that’s a great video. My husband was looking for the second part to see the torch. He wants to learn how to use the torch. I would like for you and him to talk. He is also Mexicano wey...
I tell you this ! Good video
Andy hi we are repairing part of our roof. Just want to make sure that I’m understanding correctly. The BUR Cap Sheet is torched down right? Then would the white coat go on top of that?
Pregunta amigo podría usar clavos con cabeza plástica ?
I have a question
Can you lay the underlayment over an existing torch down sheets?
It was a section and added a new room and want to match the color for both as well as adding more protection.
Thanks
I believe you would just do another layer of torch down on top of the existing...unless it is painted...
6:59 Luisito is a smart kid ya voltea te wei te vas a caer hahahahahaha
On top of playwood you dont put membrane??
Show some videos on how you get the 100lb torch down paper on the roof.. carry over the shoulder. Pulleys?? Etc...
We just walk them up the ladder lol
Thanks garcia
Tiene que usar el torch para estirarlo?
For a second there I thought Lusito was gonna grab the camera and give you the hammer, Lol
Inche Luis, nomás no hace caso; que van a 16 pulgadas, wey!! Un año y todavía no aprende?
.
Es que él usa las pulgadas grandes.
I like how guy fuckup and he tell what he do wrong too and right!
How long last app 180 rubber roof
Brutal
muy bien guey, ya no le digas a luicito que se veltie, jajaja. couple of questions if I may, 1. why do you have to start with 1/2 strips on the edge? 2. does the drip edge go over or under the felt (underlayment)? any and all information is greatly appreciated. thank you
it goes over the base sheet ,not felt ok? if you don't use smooth over base , you have to apply roof cement under the edge metal before installing over the base sheet, I start with have to brake the overlap since i'm going to start with a full roll of torch, I have to make sure the end of the roll end in the center of the base sheet to prevent any flame to go underneath the base and cause a fire .
eric garcia sorry I meant half of base sheet not have'
8yrs later The kid still roofing?
Hi I have seen all your videos😅 What is the average torching labor cost here in California ?
Hi Eric, do you glue the can strip to the wall or nail it to the wall? What to know the detail. Thanks.
nails work
Can you put torch down over 30# felt and what happens if you do?
Uh...energy cap? So the building stays cooler and doesnt absorb heat?
I was really worried he was goimg to shuffle off the roof....drama too..lol
yes that's the purpose of the energy cap, to save you $$ on your A/C bill. and keep the building cooler.
Alguien sabe el nombre de la goma la que va debajo del rufo quemado
eric echale unbistaso al. guero de true american roofing mira. como pone la antorcha. gracias a este wey sale mucho jale mandale al chapin que lede claces
Edwin Carranza ...si lo he visto al guero ese, pero la verdad no me gusta criticarlo, a veces si me hace enojar cuando pone el valley metal sobre el plywood y encima el papel
how much do roofers charge for torch down
chingos
How to nail base sheet every 2 feet and then continue to nail every 2 feet,
where did you find the help.?
Do it right the 1st time.
Mexican crews throw the job together and want paid,never come back if there is a leak.
I dont hire them anymore,gave me a bad name on some jobs.
No mas!
No worry ! You just tell maybe 20 times they get understand! Or next day ! No worry?
White labor sucks in Cali- mostly and I'm white. Entitled lil fuxxers. Best labor is latin. Dependable hard workers
I didn't know George Lopez knew how to do torch down... A webo chingao...
smaller/"tighter" lapping
What type of hammer ..
Robert PumPed up GarciA magnetic. they have a hatchet also
Luisito is the verga !
That way you do not have to walk backwards.
We heat top of fiberglass base sheet. That way it relaxes the roll and yo don't have to stretch it while nailing it
New tearcher
besides i dont need prove myself. union roofers kick ass
Is it okay or not 😂
These guys are HACKS!!
16 pulgadas vergas lol
once,again a sabb shop. when u nail base 18 inches on center 2 rolls in middle sheet and 12 on center on lap. didnt c them torch on this video i bet they dont use pull sticks. let union roofers show them how. union roofers kick ass local 153
fordman America made. ... i dont see your ass posting any videos dont trash talk if your not gonna produce your own videos. simple.
Albert Vasquez wanana be flat roofers
Really. Thats your response? Once again it shows your level of ignorance and incompetence. Why comment at all? There are millions that blab and blab and thats all there good for. But there is only a few that produce and actually post video's. Come on just make a video and post it. The guy (eric garcia) in these videos does it out of the blue and on the fly. And not just one video but in fact many, and there a very few tradesman that are brave enough to do that. My hat goes off to eric garcia that made this video. Great job keep it up.
Albert Vasquez great job??? for what. this job well not pass in our state
More sloppy and improper installation. Thanks for insuring pro roofers like me stay busy to infinity and beyond!!
Please, no more videos. I've been roofing for 40 yrs and still I see you and many others that think that they are doing the right things and it makes me sick. It's roofers like you that make me feel that I'm glad that my days as a roofer is coming to an end. Go back home.
Troy Walsberg . . . I agree with you Troy!
No you teach more ... to guys they may take longer to learn ... but they get mucho better If you teach good