Thank you, David, for this wonderful information and instructions. Over the years I have become a huge fan of the hydrangea bush. The flowers are gorgeous and the leaves are beautiful as well. This morning I realized that the leaves would be wonderful in wreaths and wondered how I could preserve them for that purpose. Your video is perfect!! It's August in Pennsylvania and the leaves on my bushes are at their peak. So, I need to begin the process of preserving. Thanks, again!!
Hi again Barbara! Hmmm - I am not sure that one is able to use this technique on hydrangea leaves... they may be too "fleshy" and could decompose in the solution. I sure would like to hear if you had success with this! Regards, David
This is so great to know! One of my indoor plants just lost a huge leaf and the colors and veins are amazing. Hoping to preserve it with this method. TFS!
Good morning Ms.C- I am glad you enjoyed this video. There are so many variations on preserving flowers, that you have to find what woks best for you and then practice makes perfect. Thank you again for commenting! Regards, David Clark
Good morning Lance. In addition to the Glycerin/Hot water treatment, mosses can be preserved using a solution of 2 parts Denatured Alcohol and 1 part Glycerine. Timing: Glycerin treatment: soak 1 hour, Alcohol: 10 minutes. Thank you for your question! Kind regards, David Clark, CNLP
Hello Charlotte from England here! Loved your video! I pressed a gunnera leaf last summer between two large ply sheets and framed it. It was a huge leaf ( over 1 meter across) it but after a while it cracked and split in the frame, probably due to temperature variations and moisture in the room and because it was so big and brittle. So now I am thinking of using glycerine and will follow your method to preserve another gunnera leaf and try to keep it flexible. If I submerge it in a glycerine bath for 6 weeks, then dry it off, could I then press it to flatten it a bit before framing? You mentioned it might bleed glycerine a bit - will that mean I can't frame it? I would really appreciate your expertise and advice. Thank you!
Hello Charlotte! Thank you for reaching out to me in the USA!! Thank you for enjoying the video. WOW! Yes! Gunnera are fantastic plants! They are so large, that they are nicknamed the "Dinosaur Food" plant! I love them! There are two varieties: G. tinctoria and G. manicata. Do you know which you have? Botanical herbariums are beautiful, but they do need supreme care, as you noted. If they are well-done, and securely preserved, they can last for many, many years. Yes, the submersion technique should work, and the process may only take 3-5 days. I think 6 weeks will be too long. You can monitor the progress by the changing color of the leaf and its texture. Yes, do dry it off and gently polish the leaf surface. Yes, you can attempt to press it smooth before the framing procedure. And, actually, this may alleviate some of the "weeping", should you use several sheets of blank newsprint between the upper and lower leaf surfaces and your press mechanic. You sure will need a very large space! I would maybe avoid adding any colorant to the glycerin solution, to avoid the colorant making any weeping issues more noticeable. The leaf will turn a lovely golden color and its silhouette will be spectacular. I would love to see the finished project! Thank you again for your comment! Kind regards, David R. Clark, CNLP Email: david3777@aol.com
@@drtek1329 Thank you so much for replying. I have gunnera manicata, which I inherited from the previous owners of our house. It's over 20 years' old and is quite something at the height of summer, with leaves measuring nearly 2 meters across. We don't often get such tropical looking plants in north Northumberland! I now can't wait to try out pressing another leaf this summer. The pressed leaf this year looked fantastic when it was first framed and before it split, so I'm hopeful this new method will prove more successful. I'll let you know how I get on and will send you photos when it's completed. Thank you again for such helpful advice. I am so very grateful for your help. Best wishes, Charlotte
@@charlotteemmett5642 Thank you Charlotte! I have enjoyed reading your reply. I live sharing things I am really good at. Maybe one day I can bring and teach my classes to your area. Kind Regards, David
It's a great video. I have a couple of questions, I would be grateful if you can answer those. 1. are the flowers preserved in glycerin lasts long like the flowers dried using silica gel method? 2. Can I directly immerse the entire flower In glycerin? because in other videos I have seen people cutting the stem and putting it in glycerine. I'm planning to dry flowers for resin art. I would really appreciate it if you please let me know if using glycerin would be the best idea to get the most vibrant result.
Hello Prajesh. My apologies for the super tardiness of my reply! The difference between glycerin and silica: Glycerin may change the color. It is full of moisture. It may"weep out" in your resin project. Specimens will work best using the stem-absorption method, although foliages can be submerged. Vibrancy can be enhanced by adding gel colorants to the solution. May not be the best for you due to the presence of the moisture in the glycerin. Silica: creates a perfectly preserved/shaped specimen. No moisture. Color change may occur. This might be the best for your resin project. Silica drieds can also be "airbrushed" using floral colorant sprays to refresh or even change the color of the specimen. They are also dry upon curing and can enhance the vibrancy of the finished product. I hope this information is helpful to you. Kind regards, David R. Clark, CNLP
How long do you find preservation lasts for leaves? Do green leaves ever brown or rot after preservation? Also can you stack leaves during this process, or do they need to be spread out in the tray?
Thanks for your great video! It's fall here again in West Michigan and the leaves are gorgeous. I'm going to try branches of maple leaves. I'll definitely keep you posted on the success. :)
Hola David I am a new subscriber and I love,love love your videos. In one of the comments asked you stated “ not to use glycerin on roses to use as a preservation technique “ can you explain why. I have Mother’s Day project and I am stuck on what to use to preserve my roses thank you.
Hello Marilyn! My experience with glycerin preservation has, in the past, concentrated on branches and leafy products. However, I recently did more research and learned that yes, you can use glycerin to preserve roses. The procedure is the same as in the video. Leave the roses in the solution for 2-3 weeks. The stem probably will turn darker and perhaps the leaves will fall off. If the roses wilt, take them out of the glycerin and hang them upside down so the glycerin reaches all parts of the flower head. The resulting roses may be a bit darker, but they will become more supple with acceptable color. I hope this information is helpful! Happy Mother's Day!!! Regards, David
Hola Marilyn! I have done further experimentation using glycerin to preserve roses...it does work! Use the same procedure as in the the video! Regards, David
Hello, Skylar! It depends on the final use of the preserved product. Roses can be " hang dried", "Pressed" between weighted papers, Glycerized (as in my video), or preserved using denatured alcohol and glycerin. Thank you for your question! Kind Regards, David Clark, CNLP
Hi, your videos are really great, thank you for them A couple of questions, is their a certain type of glycerin /glycerine to use? I mean I have found that pharmacists sell glycerin for your throuts, is that the type we are meant to buy as I don't know what I am looking for, And I noticed your other video about preserving roses with silica gel was only for the head of the rose, which method would you suggest for preserving an entire rose with head and stem and leaves? As I didn't really want to cut the head off to preserve the head and stem seperately but if thats the only option then I guess it will have to do And again, thank you for the videos, they are very helpful
***** Thank you for the reply :) How would you suggest preserving an entire rose on say a 6-9inch stem with leaves still attached? I know this is a strange request but I cannot find any videos or instructables on the internet and it seems a common request in all the places I look Can it be achieved with only one preservation method?
Hi.. Have you ever tried this method on fern branches? I'm planning on doing this for my fern branches but was wondering if there is something I need to know before I get started. Thanks for the nice tutorial! :)
Hello Vidya! Yes, I have used glycerin on fern fronds. The process I would use would be to submerge the entire frond in the solution. A helpful tip would be to lay a piece of clear plastic, such as food cling wrap on top of the frond to make sure it stays covered. Also, I would add food coloring to the soultion to keep the material green. Thank you for liking my work!!! Regards, David Clark, CNLP
Hello Ashu! It depends on the plant material you are using. You will see a color change in the stems/leaves/flowers as the solution is absorbed upward. Once the color change is to the top, remove the material from the solution, rinse the lowers stem ends in water and hang the material upside down so the glycerin in the stem continues it's movement to the tip of the material. Timing is 2-3 weeks depending on the material. Thank you for your kind wish!! Regards, David Clark, CNLP
Hello Hiba! You sure can use this same method to preserve moss! Make sure add a good amount of green liquid food coloring to the gylcerin solution. The moss will absorb the color along with the glycerine and will have a nice fresh green color. CAREFULLY rinse the moss in a bowl of water and then dry on a window screen until completely dry. Thank you for your question!
Dont know if you can assist. I was just in the bahamas and purchased a palm frond hat for my son that i would like to keep green. I thought the glycerine was the solution until you spoke about heat and humidity. Its a hat.....any suggestions?
Hello Bob! Sorry for the lateness of my reply to your very interesting question. I do sometimes use a light misting using a spray bottle to dried items for keeping them supple...Perhaps this would be the way to go. The light application probably would not cause as many issues as if the hat was submerged in the solution. I did some research for you on caring for palm hats from Royal Palm. Here is the link: www.royalpalmhats.com/index.php?route=information/information&information_id=10 Regards, David
Does the glycerin method work on dead branches, too? And how long would I probably need to keep the branches submerged? Every site that talks about this mentions how the branches will "drink" the glycerin, but this assumes they're freshly cut/still alive. The branches I want to preserve have been cut from the tree for nearly a year now and have no leaves. They're not crumbling yet, but I think the ends are rotted a little bit.
David Chiu Hi David!!! As you have read in your research, it is best to using living plant material for the glycerin process. You may be able to impart some softening of the branches if you were to totally submerge the branches in the solution for a couple of weeks. Thank you for your question!!!
To Ashu Sodhi- Thank you for your question-- Preserving 18" length stems with leaves in the glycerine&water solution can take 6-9 weeks for the glycerine to be drawn up the branch. The time frame for submerging leaves and vines is 3-4 days. As always, the color change from green to a goldish color tells you the process is complete. David Clark www.davidclarkwny.com www.greatgardenspeakers.com
Hi David, thanks for the tutorial! Due to life circumstances, I kept them in the glycerine for too long. They are now all very dark and I am wondering if there is a way to reverse some of the process and get back any amount of original color.
+Avalon Studios So if I were to put them in really warm water again, would it loosen some glycerin and get it to come out of the leaves, revealing more of the color that was there?
Hello Avalon Studios! I do not believe there is a way to 'reverse' the process - It would be best to start again - however, I bet your preserved leaves will last many seasons! Regards, David
How to store the reusable glycerin? Isn't there some neglect from previous preservation cause of the exchange of the fluids allready in side the plant? Great thanks
Hi Marius! You can reuse the solution by straining our any residual plant parts and storing it in a glass bottle. Mold my form on the surface, that is harmless--- and can be skimmed away. Many thanks!
Your leaf won't draw up the glycerin anymore. But that's okay; what you have already is a pressed leaf. You should be able to frame it as is behind glass with no problem. Since it's so important to you, I would suggest using the kind of glass that protects against UV rays. If you still feel uneasy, you might want to try coating your leaf with a sealant such as ModgePodge. I'm not an expert; check with an art conservation expert to see which method is best.
very beautiful project and expression. I want to learn something? some people do not recommend using the mixture we use again. After the process is over, we can use the mixture again and how to store it. Should we add glycerin again when using? or how many times can we use. and these glycerine leaves or flowers, we do on the glycerine epoxy dissolved. Thank you
Hi Mustafa! You can reuse the solution, as long as there is no mold growing on the surface. In that case, I `would start with new solution and proceed with the process. The solution can be stored in glass containers with lids. You could top off the existing solution with more glycerin + water, but again, if it becomes discolored or moldy, I would start with fresh solution. Regards, David Clark, CNLP
Hi David, Thank you so much for your video. In the video you show post-glycerized leaves a green color, yet you say the process is complete when the leaves are a different, golden brownish color. I'd like my leaves to be green. Should I shorten the process to 2 days to ensure they keep the green color? Or am I missing something? Thank you very much!
Roy Brooks Hi Roy! Holy cow, I did not get an update that you posted a comment!! The best way to keep the leaves green is to add green vegetable food coloring to the glycerine solution. As the glycerin moves through the leaves and stems, the color will be deposited in the tissues. Great question!!! regards, David
Hi Diana!! I prefer to use natural liquid glycerin which is prepared from natural oils such as coconut and palm, instead pf petroleum based types. I feel it is better for the environment and these natural sources are from sustainable crops.
Thank you for your response, but can I still do it with the dry leaf? I have a very special leaf from a tree that has since died. I want to frame it, but I'm afraid if I don't preserve it properly it will deteriorate. It's been dry for a couple of years, but is in pretty good, flat condition. Your advice on how to handle this leaf for framing would be much appreciated.
Hi Linda Marie! Yes, 1 part can mean 1 cup, 1 pint, 1 quart, 1 gallon, etc. 2 parts means that you double the 1 part. So, if you are using 1 cup glycerin, then add 2 cups water, etc. Regards, David Clark, CNLP
If I were to do this by say, piling a stack of leaves in a deep bottle and then filling the bottle, would it have an impact on time or quality of the finished product? And does there need to be air exchange involved in this process, or can the container be sealed for the duration? Thank you for the tips and videos.
Hi Neil! I think you could use a bottle for the process, just remember you need to be able to remove the leaves from the solution. A quart jar or pickle jar would work too! There does not need to be air exchange in the process, but I would not seal the jar to be on the safe side. Thank you for liking my tips and videos!
A large jar was the essence of my plan. I appreciate the fast response. Since you recommend not sealing the vessel, I think I will use a lid with a Tyvek material center, to allow air exchange while keeping moisture and other negative influences from the mix. My son and I happened upon a beauty of a collection of windfall golden and green-gold Ginko leaves the other day in a parking lot and I can't wait to immortalize them.
@@vibhupande They were forgotten and the project didn't happen.. Instead they were dried naturally in the brown bag. I still have plans to employ this method.. I'll make sure I come back and let you know my progress when it happens. So many projects, so little time.
Hi, great video and very useful information!!! I would like to preserve small olive branches. Have you tried it? Does this method apply to olive leaves and branches as well? Can you give me some specific details about preserving olive branches for a long time? Or do you know someone who can, please?
Vasilis Andreadakis Hi Vasilis! I have not used this glycerine treatment specifically on olive branches. I have however used it on myrtle branches with good results. I would give it a try...and let me know how it works for you!!! Thank you! David
+sweetboo1022 Hi Sweetboo!! The polishing occurs after rinsing the leaves in the sink. Lightly shine them up with the paper towel or a soft cloth. Thank you for your question!!
Hello. I am collecting an array different type of leaves and flowers, for educational purposes, and I would like to know how long does the glycerin method for preserving leaves and flowers last? How does the original texture and color of the flower or leaves hold up after the glycerin treatment?
+Jamela Sullivan As David showed in the video, the leaves stay flexible. The leaves will be preserved almost indefinitely. You can add food coloring to the glycerin to help it maintain its color.
+Jamela Sullivan Hi Jamela! Most preserved materials hold their colors for up to 3 years. It is best to keep them out of direct sunlight and humid conditions--- Thank you for your question!
hello, how long do the leaves last or stay preserved? I cosplay and am doing a cosplay that requires leaves but don't wanna use fake ones.... someone told me I could preserve actual leaves and use them.
Thatbandfreak Hello! The leaves will stay preserved almost indefinitely! I think they would be perfect for your cosplay-- Please share pictures! Regards, David
Hello Dominic! Thank you for your question and for viewing my video. I would recommend leaving magnolia leaves in the solution for 3-4 days, and then pat them dry. They will last for many seasons this way! Regards, David
Hello Samy! I would not use the glycerin technique to preserve flowers. Here is a link to anther of my videos on drying roses using desiccants: ruclips.net/video/GjhjdFJgO8c/видео.html I hope you find this helpful! Regards, David
K. Anne Peck Hi K! Thank you for your question, my apologies about not responding in a timely manner!! The glycerine technique is used for preserving broadleaf evergreens such as holly,magnolia and myrtle. Needle-type evergreens such as Douglas fir, spruce, pine will unfortunately still drop their needles, although the remaining branch will become preserved. But here's a twist on this--the dropped pine needles themselves can be preserved with glycerin!! Regards, David
K. Anne Peck Hello K- probably the best way to dry needle type evergreens is to bundle them in manageable lengths and then hang them upside down to dry.
Hello Barbara! My apologies for the tardiness of my reply! I use a food-grade glycerin that I purchase from a local health-food store. It is WAY less expensive than what you might find in your drug store! Thank you for viewing my video and for your question! Regards, David
Hi, I am creating an object made out of yellow leaves. In order for it to work, the leaves need to be fresh. I need to collect all the leaves before fall when they are dried out. I am starting to collect them now and I need them to stay fresh until mid December. For how long will the glycerin solution maintain the leaf fresh and let it maintain its yellow color? Are there any other methods that will allow the leaves to remain moist after that period of time?
I'm not sure what kind of a project you have in mind, but here are a few ideas. You can try ironing the leaves with wax paper. This is something we did when we were kids. I'm not sure how long the leaves will last; we never kept them very long. Just set your leaf on an ironing board, set a sheet of wax paper over the top, and go over it with your iron. Do both sides. You might also try coating your leaves with a product such as Mod Podge. That should preserve them until December and beyond, but the leaves will be stiff. You could also try freezing the leaves. Cover them with moist paper towels; the air in a freezer is dry. If you freeze them now, they should come out of the freezer looking fresh. Hope that helps.
Connie Oswald Stofko ***** Thanks a lot for your ideas! I am molding the leaves around a large pendant light using mod podge. I want the leaves to maintain their color and not dry forever, or at least for some years! Is the coat of mod podge enough for that? or should i add something such as a sealer? i thought about using varnish or polyurethane
Nicole Bach I think if you cover leaves with Mod Podge, they should stay looking fresh for years. Starting a few years ago, I have used Mod Podge to adhere dried leaves and petals to canvas and they're all still fine. However, I'm not an expert when it comes to the differences between varnish and polyurethane and Mod Podge. Plus, you're using the leaves around something that could get hot, and I don't know what would work best or even be safe. You might want to ask a crafter. Try Lindsay Weirich, the Frugal Crafter. I hope that helps.
Nicole Bach I left a comment for the Frugal Crafter and she replied that she thinks Mod Podge would work best. You can still contact her if you have follow-up questions.
Connie Oswald Stofko Thanks! Can I mix preservation methods such as the glycerin and then leaving the leaves in the fridge? I am having a problem with Mod Podge since it dries white. Is there a transparent glue I can use instead? If not, is there a way for me to remove the white bits of dried glue? thanks again
Hello Amanda! The polishing technique is performed by rinsing the leaves in lukewarm water, laying them on a paper towel to dry, and then polishing them with a paper towel. The glycerin becomes the polish! Regards, David
+I Felici Hello! Glycerin would be perfect for preserving fern fronds. I would use the submersion technique. Use a large glass container, lay in the fronds and pour the glycerin and water solution to completely cover the fronds.Thank you for your question!
Hello Marietta! Thank you for viewing the video and for your question! The best way to keep magnolia leaves (and other green foliage) is to add green food coloring to the glycerin/water solution. I have recently been using Chefmaster Liqua-gel food coloring, as it is more concentrated than the little bottles you find in your local grocery store. You can find gel colors at cake decorating supply stores or online. Regards, David
Hello Natasha! My apologies about the tardiness of my reply! I would not use this glycerin technique for roses...I do have another video for you to view on how to dry roses and other flowers using Silica gel and other desiccants. Here is the link to that video: ruclips.net/video/GjhjdFJgO8c/видео.html I thank you very much for viewing my video and for your question! Regards, David
Thank you, David, for this wonderful information and instructions. Over the years I have become a huge fan of the hydrangea bush. The flowers are gorgeous and the leaves are beautiful as well. This morning I realized that the leaves would be wonderful in wreaths and wondered how I could preserve them for that purpose. Your video is perfect!! It's August in Pennsylvania and the leaves on my bushes are at their peak. So, I need to begin the process of preserving. Thanks, again!!
Hi again Barbara!
Hmmm - I am not sure that one is able to use this technique on hydrangea leaves... they may be too "fleshy" and could decompose in the solution.
I sure would like to hear if you had success with this!
Regards,
David
Hi David! Thank you so much for this video! I’ve been researching this for a while and your video is by far the best one!
Thank you!
Glad it was helpful!
Thank you, Michael!
This is so great to know! One of my indoor plants just lost a huge leaf and the colors and veins are amazing. Hoping to preserve it with this method. TFS!
Thank you so much for viewing my video- I hope you found it helpful!
Regards,
David
Excellent video - you have covered everything. Thanks very much.
Good morning Ms.C-
I am glad you enjoyed this video. There are so many variations on preserving flowers, that you have to find what woks best for you and then practice makes perfect. Thank you again for commenting!
Regards,
David Clark
drtek *works
Thank you for such an easy to listen to and follow video. I appreciate the extra knowledge you shared, than just to how to preserve the leaves. :)
Thank you Tracy -
I do try to provide as much pertinent information on the subject plus additional information in all of my classes!
Great informative video. Can this method be done to preserve boxwoods?
Hi Theresa!
Yes, the process can be used to preserve boxwood, along with other varieties of evergreen branches.
Regards,
David Clark, CNLP
thank you for clear, simple instructions, right to the point.
I'm glad you found it helpful!
Hi, how many days would you leave moss for preservation in the glycerine and water mixture please?
Good morning Lance.
In addition to the Glycerin/Hot water treatment, mosses can be preserved using a solution of 2 parts Denatured Alcohol and 1 part Glycerine.
Timing: Glycerin treatment: soak 1 hour, Alcohol: 10 minutes.
Thank you for your question!
Kind regards,
David Clark, CNLP
@@drtek1329 Thank you for your response, much appreciated.
@@drtek1329 hey, 1 hour on glycerine right?
Hello Charlotte from England here! Loved your video! I pressed a gunnera leaf last summer between two large ply sheets and framed it. It was a huge leaf ( over 1 meter across) it but after a while it cracked and split in the frame, probably due to temperature variations and moisture in the room and because it was so big and brittle. So now I am thinking of using glycerine and will follow your method to preserve another gunnera leaf and try to keep it flexible. If I submerge it in a glycerine bath for 6 weeks, then dry it off, could I then press it to flatten it a bit before framing? You mentioned it might bleed glycerine a bit - will that mean I can't frame it? I would really appreciate your expertise and advice. Thank you!
Hello Charlotte! Thank you for reaching out to me in the USA!! Thank you for enjoying the video. WOW! Yes! Gunnera are fantastic plants! They are so large, that they are nicknamed the "Dinosaur Food" plant! I love them!
There are two varieties: G. tinctoria and G. manicata. Do you know which you have?
Botanical herbariums are beautiful, but they do need supreme care, as you noted. If they are well-done, and securely preserved, they can last for many, many years.
Yes, the submersion technique should work, and the process may only take 3-5 days. I think 6 weeks will be too long. You can monitor the progress by the changing color of the leaf and its texture.
Yes, do dry it off and gently polish the leaf surface.
Yes, you can attempt to press it smooth before the framing procedure. And, actually, this may alleviate some of the "weeping", should you use several sheets of blank newsprint between the upper and lower leaf surfaces and your press mechanic. You sure will need a very large space!
I would maybe avoid adding any colorant to the glycerin solution, to avoid the colorant making any weeping issues more noticeable. The leaf will turn a lovely golden color and its silhouette will be spectacular.
I would love to see the finished project!
Thank you again for your comment!
Kind regards,
David R. Clark, CNLP
Email: david3777@aol.com
@@drtek1329 Thank you so much for replying. I have gunnera manicata, which I inherited from the previous owners of our house. It's over 20 years' old and is quite something at the height of summer, with leaves measuring nearly 2 meters across. We don't often get such tropical looking plants in north Northumberland! I now can't wait to try out pressing another leaf this summer. The pressed leaf this year looked fantastic when it was first framed and before it split, so I'm hopeful this new method will prove more successful. I'll let you know how I get on and will send you photos when it's completed. Thank you again for such helpful advice. I am so very grateful for your help. Best wishes, Charlotte
@@charlotteemmett5642 Thank you Charlotte!
I have enjoyed reading your reply.
I live sharing things I am really good at.
Maybe one day I can bring and teach my classes to your area.
Kind Regards,
David
It's a great video. I have a couple of questions, I would be grateful if you can answer those.
1. are the flowers preserved in glycerin lasts long like the flowers dried using silica gel method?
2. Can I directly immerse the entire flower In glycerin? because in other videos I have seen people cutting the stem and putting it in glycerine.
I'm planning to dry flowers for resin art. I would really appreciate it if you please let me know if using glycerin would be the best idea to get the most vibrant result.
Hello Prajesh.
My apologies for the super tardiness of my reply!
The difference between glycerin and silica:
Glycerin may change the color. It is full of moisture. It may"weep out" in your resin project. Specimens will work best using the stem-absorption method, although foliages can be submerged. Vibrancy can be enhanced by adding gel colorants to the solution. May not be the best for you due to the presence of the moisture in the glycerin.
Silica: creates a perfectly preserved/shaped specimen. No moisture. Color change may occur. This might be the best for your resin project. Silica drieds can also be "airbrushed" using floral colorant sprays to refresh or even change the color of the specimen. They are also dry upon curing and can enhance the vibrancy of the finished product.
I hope this information is helpful to you.
Kind regards,
David R. Clark, CNLP
@@drtek1329 thank you for such a detailed reply .
How long do you find preservation lasts for leaves? Do green leaves ever brown or rot after preservation?
Also can you stack leaves during this process, or do they need to be spread out in the tray?
It is almost a "forever" treatment, although color do fade after several years.
Thanks for your great video! It's fall here again in West Michigan and the leaves are gorgeous. I'm going to try branches of maple leaves. I'll definitely keep you posted on the success. :)
+Carol Flegel Hi Carol! Thank you for your very nice comment!!! This is a great craft to learn and to share with others!
Hola David I am a new subscriber and I love,love love your videos. In one of the comments asked you stated “ not to use glycerin on roses to use as a preservation technique “ can you explain why. I have Mother’s Day project and I am stuck on what to use to preserve my roses thank you.
Hello Marilyn!
My experience with glycerin preservation has, in the past, concentrated on branches and leafy products. However, I recently did more research and learned that yes, you can use glycerin to preserve roses. The procedure is the same as in the video. Leave the roses in the solution for 2-3 weeks. The stem probably will turn darker and perhaps the leaves will fall off. If the roses wilt, take them out of the glycerin and hang them upside down so the glycerin reaches all parts of the flower head. The resulting roses may be a bit darker, but they will become more supple with acceptable color.
I hope this information is helpful!
Happy Mother's Day!!!
Regards,
David
Hola Marilyn!
I have done further experimentation using glycerin to preserve roses...it does work! Use the same procedure as in the the video!
Regards,
David
what is the best method for preserving roses? If you use glycerin can you cut the stems and just let the actual rose be submerged in the glycerin?
Hello, Skylar!
It depends on the final use of the preserved product.
Roses can be " hang dried", "Pressed" between weighted papers, Glycerized (as in my video), or preserved using denatured alcohol and glycerin.
Thank you for your question!
Kind Regards,
David Clark, CNLP
Thanks for the video! I am going to preserve some maple leaves and this is exactly what I was looking for
Hi Lucas!
Thank you so much for viewing my video! This technique is fail-safe!
Keep me posted with your results!
Regards,
David
Thank you Lucas for liking the video - I am glad to hear that your found the information helpful!
Regards,
David
Very cool trick! Thanks for the info!!
Thank you Erica!!!
Hi, your videos are really great, thank you for them
A couple of questions, is their a certain type of glycerin /glycerine to use? I mean I have found that pharmacists sell glycerin for your throuts, is that the type we are meant to buy as I don't know what I am looking for,
And I noticed your other video about preserving roses with silica gel was only for the head of the rose, which method would you suggest for preserving an entire rose with head and stem and leaves? As I didn't really want to cut the head off to preserve the head and stem seperately but if thats the only option then I guess it will have to do
And again, thank you for the videos, they are very helpful
*****
Thank you for the reply :)
How would you suggest preserving an entire rose on say a 6-9inch stem with leaves still attached?
I know this is a strange request but I cannot find any videos or instructables on the internet and it seems a common request in all the places I look
Can it be achieved with only one preservation method?
Hi.. Have you ever tried this method on fern branches? I'm planning on doing this for my fern branches but was wondering if there is something I need to know before I get started. Thanks for the nice tutorial! :)
Hello Vidya!
Yes, I have used glycerin on fern fronds. The process I would use would be to submerge the entire frond in the solution. A helpful tip would be to lay a piece of clear plastic, such as food cling wrap on top of the frond to make sure it stays covered. Also, I would add food coloring to the soultion to keep the material green.
Thank you for liking my work!!!
Regards,
David Clark, CNLP
Also, the optimum length of the branch should not exceed 16-20" in length...
@@drtek1329 Thanks David for the quick reply... i will try it out! 😀
Hi David thanks for sharing. Plz tell for how many days or hours for the preservation, and also tell how long it can stay. God bless u.........
Hello Ashu!
It depends on the plant material you are using. You will see a color change in the stems/leaves/flowers as the solution is absorbed upward. Once the color change is to the top, remove the material from the solution, rinse the lowers stem ends in water and hang the material upside down so the glycerin in the stem continues it's movement to the tip of the material.
Timing is 2-3 weeks depending on the material.
Thank you for your kind wish!!
Regards,
David Clark, CNLP
Gr8! can this process preserve moss too?
Hello Hiba!
You sure can use this same method to preserve moss! Make sure add a good amount of green liquid food coloring to the gylcerin solution. The moss will absorb the color along with the glycerine and will have a nice fresh green color. CAREFULLY rinse the moss in a bowl of water and then dry on a window screen until completely dry. Thank you for your question!
thank u! :D
Dont know if you can assist. I was just in the bahamas and purchased a palm frond hat for my son that i would like to keep green. I thought the glycerine was the solution until you spoke about heat and humidity. Its a hat.....any suggestions?
Hello Bob!
Sorry for the lateness of my reply to your very interesting question.
I do sometimes use a light misting using a spray bottle to dried items for keeping them supple...Perhaps this would be the way to go. The light application probably would not cause as many issues as if the hat was submerged in the solution. I did some research for you on caring for palm hats from Royal Palm. Here is the link:
www.royalpalmhats.com/index.php?route=information/information&information_id=10
Regards,
David
Does the glycerin method work on dead branches, too? And how long would I probably need to keep the branches submerged? Every site that talks about this mentions how the branches will "drink" the glycerin, but this assumes they're freshly cut/still alive. The branches I want to preserve have been cut from the tree for nearly a year now and have no leaves. They're not crumbling yet, but I think the ends are rotted a little bit.
David Chiu Hi David!!! As you have read in your research, it is best to using living plant material for the glycerin process. You may be able to impart some softening of the branches if you were to totally submerge the branches in the solution for a couple of weeks. Thank you for your question!!!
You mentioned that in humid temperatures, the glycerin will leak. Is there any way to seal it permanently? PU coat, acrylic coat, polish?
Any tips on how to preserve leaves if you plan to use them in an outdoor wedding? Temps probably around 90F
Hello Jamie!
The glycerined leaves would work perfectly for your outdoor wedding!
Regards,
David
To Ashu Sodhi-
Thank you for your question--
Preserving 18" length stems with leaves in the glycerine&water solution can take 6-9 weeks for the glycerine to be drawn up the branch. The time frame for submerging leaves and vines is 3-4 days. As always, the color change from green to a goldish color tells you the process is complete.
David Clark
www.davidclarkwny.com
www.greatgardenspeakers.com
Hi David, thanks for the tutorial!
Due to life circumstances, I kept them in the glycerine for too long. They are now all very dark and I am wondering if there is a way to reverse some of the process and get back any amount of original color.
+Avalon Studios So if I were to put them in really warm water again, would it loosen some glycerin and get it to come out of the leaves, revealing more of the color that was there?
Hello Avalon Studios!
I do not believe there is a way to 'reverse' the process - It would be best to start again - however, I bet your preserved leaves will last many seasons!
Regards,
David
How to store the reusable glycerin? Isn't there some neglect from previous preservation cause of the exchange of the fluids allready in side the plant? Great thanks
Hi Marius!
You can reuse the solution by straining our any residual plant parts and storing it in a glass bottle. Mold my form on the surface, that is harmless--- and can be skimmed away. Many thanks!
Your leaf won't draw up the glycerin anymore. But that's okay; what you have already is a pressed leaf. You should be able to frame it as is behind glass with no problem. Since it's so important to you, I would suggest using the kind of glass that protects against UV rays. If you still feel uneasy, you might want to try coating your leaf with a sealant such as ModgePodge. I'm not an expert; check with an art conservation expert to see which method is best.
very beautiful project and expression. I want to learn something? some people do not recommend using the mixture we use again. After the process is over, we can use the mixture again and how to store it. Should we add glycerin again when using? or how many times can we use. and these glycerine leaves or flowers, we do on the glycerine epoxy dissolved. Thank you
Hi Mustafa!
You can reuse the solution, as long as there is no mold growing on the surface. In that case, I `would start with new solution and proceed with the process.
The solution can be stored in glass containers with lids.
You could top off the existing solution with more glycerin + water, but again, if it becomes discolored or moldy, I would start with fresh solution.
Regards,
David Clark, CNLP
Hi David, Thank you so much for your video. In the video you show post-glycerized leaves a green color, yet you say the process is complete when the leaves are a different, golden brownish color. I'd like my leaves to be green. Should I shorten the process to 2 days to ensure they keep the green color? Or am I missing something? Thank you very much!
Roy Brooks Hi Roy! Holy cow, I did not get an update that you posted a comment!!
The best way to keep the leaves green is to add green vegetable food coloring to the glycerine solution. As the glycerin moves through the leaves and stems, the color will be deposited in the tissues.
Great question!!!
regards,
David
thanks for the succinct explanation.
Thank you Eanna!
Thanks for the video... What type of glycirine use for preserve ? vegetal, liquid, or another?
Hi Diana!!
I prefer to use natural liquid glycerin which is prepared from natural oils such as coconut and palm, instead pf petroleum based types. I feel it is better for the environment and these natural sources are from sustainable crops.
Thank you for your response, but can I still do it with the dry leaf? I have a very special leaf from a tree that has since died. I want to frame it, but I'm afraid if I don't preserve it properly it will deteriorate. It's been dry for a couple of years, but is in pretty good, flat condition. Your advice on how to handle this leaf for framing would be much appreciated.
What does 1 part mean. 1 cup 8oz what does 2 part mean?
Hi Linda Marie!
Yes, 1 part can mean 1 cup, 1 pint, 1 quart, 1 gallon, etc.
2 parts means that you double the 1 part. So, if you are using 1 cup glycerin, then add 2 cups water, etc.
Regards, David Clark, CNLP
If I were to do this by say, piling a stack of leaves in a deep bottle and then filling the bottle, would it have an impact on time or quality of the finished product? And does there need to be air exchange involved in this process, or can the container be sealed for the duration? Thank you for the tips and videos.
Hi Neil!
I think you could use a bottle for the process, just remember you need to be able to remove the leaves from the solution. A quart jar or pickle jar would work too! There does not need to be air exchange in the process, but I would not seal the jar to be on the safe side. Thank you for liking my tips and videos!
A large jar was the essence of my plan. I appreciate the fast response. Since you recommend not sealing the vessel, I think I will use a lid with a Tyvek material center, to allow air exchange while keeping moisture and other negative influences from the mix. My son and I happened upon a beauty of a collection of windfall golden and green-gold Ginko leaves the other day in a parking lot and I can't wait to immortalize them.
@@neilhorst9262 Hi. How did the Ginkgo leaves turn out?
@@vibhupande They were forgotten and the project didn't happen.. Instead they were dried naturally in the brown bag. I still have plans to employ this method.. I'll make sure I come back and let you know my progress when it happens. So many projects, so little time.
Is vegetable glycerine the same as what you used in this video? Also, can you add salt to raise the temp of the water?
Thanks in advance!
Hi, great video and very useful information!!! I would like to preserve small olive branches. Have you tried it? Does this method apply to olive leaves and branches as well? Can you give me some specific details about preserving olive branches for a long time? Or do you know someone who can, please?
Vasilis Andreadakis Hi Vasilis! I have not used this glycerine treatment specifically on olive branches. I have however used it on myrtle branches with good results. I would give it a try...and let me know how it works for you!!!
Thank you!
David
david clark Tha nk yuo David. Do you someone that has done it that can give me some specific details?
Hi Vasilis- I think you will have good results following the procedure as shown in my video.
very fun summer project, thank you for this video :)
can you do this to petals? or can i submerge a whole rose into like a jar of the solution?
Okay I am on my way to start preserving the leaves and stems.
+Rani von Württemberg Hi Rani! I am happy to hear you are interested in this process. Keep me posted on your successes!
what did you polish them with? just water and a paper towel? thanks so much.
+sweetboo1022 Hi Sweetboo!! The polishing occurs after rinsing the leaves in the sink. Lightly shine them up with the paper towel or a soft cloth. Thank you for your question!!
Hello. I am collecting an array different type of leaves and flowers, for educational purposes, and I would like to know how long does the glycerin method for preserving leaves and flowers last? How does the original texture and color of the flower or leaves hold up after the glycerin treatment?
+Jamela Sullivan As David showed in the video, the leaves stay flexible. The leaves will be preserved almost indefinitely. You can add food coloring to the glycerin to help it maintain its color.
so how long before it loses its original color?
+Jamela Sullivan Hi Jamela! Most preserved materials hold their colors for up to 3 years. It is best to keep them out of direct sunlight and humid conditions--- Thank you for your question!
Will the leaf last forever...by glycerine method
It won't last forever, but it will last a long time.
hello, how long do the leaves last or stay preserved? I cosplay and am doing a cosplay that requires leaves but don't wanna use fake ones.... someone told me I could preserve actual leaves and use them.
Thatbandfreak Hello! The leaves will stay preserved almost indefinitely! I think they would be perfect for your cosplay--
Please share pictures!
Regards,
David
how do you know you perserved them ?
how long should I let my magnolia leaves sit sit in the glycerin please and thank you
Hello Dominic!
Thank you for your question and for viewing my video. I would recommend leaving magnolia leaves in the solution for 3-4 days, and then pat them dry. They will last for many seasons this way!
Regards,
David
Can I follow this process if the leaf is already dry?
can you preserve flowers too in the same solution
Hello Samy!
I would not use the glycerin technique to preserve flowers.
Here is a link to anther of my videos on drying roses using desiccants: ruclips.net/video/GjhjdFJgO8c/видео.html
I hope you find this helpful!
Regards,
David
can you do this with Pine branches by submerging the needles?
K. Anne Peck Hi K! Thank you for your question, my apologies about not responding in a timely manner!!
The glycerine technique is used for preserving broadleaf evergreens such as holly,magnolia and myrtle. Needle-type evergreens such as Douglas fir, spruce, pine will unfortunately still drop their needles, although the remaining branch will become preserved.
But here's a twist on this--the dropped pine needles themselves can be preserved with glycerin!!
Regards,
David
K. Anne Peck Hello K- probably the best way to dry needle type evergreens is to bundle them in manageable lengths and then hang them upside down to dry.
Well... He is really atractive
Thank you for that!
Is there a certain brand of glycerin that works better than others? And, where would I purchase it?
Hello Barbara!
My apologies for the tardiness of my reply!
I use a food-grade glycerin that I purchase from a local health-food store. It is WAY less expensive than what you might find in your drug store!
Thank you for viewing my video and for your question!
Regards,
David
can i use this for nopales
Hello!
If I gather correctly, nopales are prickly pear pads? They may be too fleshy for this process and certainly would not be edible afterwards!
david clark i kind of just wanted to put a nopale in a shadow box/frame type of thing without it like dying
In the description above, you can find a link to the video on how to dry roses. You may need to click on "Show more".
Hi, I am creating an object made out of yellow leaves. In order for it to work, the leaves need to be fresh. I need to collect all the leaves before fall when they are dried out. I am starting to collect them now and I need them to stay fresh until mid December. For how long will the glycerin solution maintain the leaf fresh and let it maintain its yellow color? Are there any other methods that will allow the leaves to remain moist after that period of time?
I'm not sure what kind of a project you have in mind, but here are a few ideas. You can try ironing the leaves with wax paper. This is something we did when we were kids. I'm not sure how long the leaves will last; we never kept them very long. Just set your leaf on an ironing board, set a sheet of wax paper over the top, and go over it with your iron. Do both sides. You might also try coating your leaves with a product such as Mod Podge. That should preserve them until December and beyond, but the leaves will be stiff. You could also try freezing the leaves. Cover them with moist paper towels; the air in a freezer is dry. If you freeze them now, they should come out of the freezer looking fresh. Hope that helps.
Connie Oswald Stofko ***** Thanks a lot for your ideas! I am molding the leaves around a large pendant light using mod podge. I want the leaves to maintain their color and not dry forever, or at least for some years! Is the coat of mod podge enough for that? or should i add something such as a sealer? i thought about using varnish or polyurethane
Nicole Bach
I think if you cover leaves with Mod Podge, they should stay looking fresh for years. Starting a few years ago, I have used Mod Podge to adhere dried leaves and petals to canvas and they're all still fine. However, I'm not an expert when it comes to the differences between varnish and polyurethane and Mod Podge. Plus, you're using the leaves around something that could get hot, and I don't know what would work best or even be safe. You might want to ask a crafter. Try Lindsay Weirich, the Frugal Crafter. I hope that helps.
Nicole Bach I left a comment for the Frugal Crafter and she replied that she thinks
Mod Podge would work best. You can still contact her if you have
follow-up questions.
Connie Oswald Stofko Thanks! Can I mix preservation methods such as the glycerin and then leaving the leaves in the fridge? I am having a problem with Mod Podge since it dries white. Is there a transparent glue I can use instead? If not, is there a way for me to remove the white bits of dried glue? thanks again
What kind of "polish" do I use on the leaves?
Hello Amanda!
The polishing technique is performed by rinsing the leaves in lukewarm water, laying them on a paper towel to dry, and then polishing them with a paper towel. The glycerin becomes the polish!
Regards,
David
Is using Glycerin an acceptable method to preserve Ferns?
+I Felici Hello! Glycerin would be perfect for preserving fern fronds. I would use the submersion technique. Use a large glass container, lay in the fronds and pour the glycerin and water solution to completely cover the fronds.Thank you for your question!
how can you keep magnolia leaves green?
Hello Marietta!
Thank you for viewing the video and for your question!
The best way to keep magnolia leaves (and other green foliage) is to add green food coloring to the glycerin/water solution. I have recently been using Chefmaster Liqua-gel food coloring, as it is more concentrated than the little bottles you find in your local grocery store. You can find gel colors at cake decorating supply stores or online.
Regards,
David
Hi is the method to preserve roses with glycerine the same? I am trying to preserve roses which will last up to a year. please help !!!!
Hello Natasha!
My apologies about the tardiness of my reply!
I would not use this glycerin technique for roses...I do have another video for you to view on how to dry roses and other flowers using Silica gel and other desiccants.
Here is the link to that video: ruclips.net/video/GjhjdFJgO8c/видео.html
I thank you very much for viewing my video and for your question!
Regards,
David