Great how to , I ran a Citizen L20 and a L25 about 12 years ago and will be starting a new job here in a couple weeks and found this very helpful .Thank you
I work also on A20, it's incredibly stable, it's amazing how you could start it and turn your back and just go.. i could rate this mashine on 7 stars because the work it does..hello from Germany 👋
Go to manual(handle) move z out a bit, go to prepare, hit cutoff and st position then coolant, when you see hnd ****, hold down cutoff and hit the start button
There are so many different types of tool stations that can be applied to the citizen machines with so many different stick out lengths. To make a probing system like a normal lathe would be very expensive because several would be needed for the different tool types for each spindle. Believe me I have thought that for years now for setting these things up
@@PetesShredder That could maybe work but there are a ton of different holders and options that go in these swiss machines that would make it hard and not cost effective to do. Once you practice it a few times its not so bad.
@@dynamicmachineuniversity2318 yeah and you would have to get it straight and level too. I’m imagining a bit of ground diameter with a four pad tool setter sticking out the end like our mazaks have
I feel sorry for anyone using a FANUC control on a Citizen machine. We have 14 Citizen machines at my shop from 12MM to 32MM. Some are A machines some are L machines. We have ONE that has a FANUC control, the rest use Citizen Cincom controls. The Cincom makes it SO MUCH easier to set up a machine VS the FANUC.
It help me .. Sir please make videos on how to take centre of all working tools, programming, c axis and indexing, how much degree is given according to material during Chuck pressure etc. Please sir I m waiting for positive response....... Thanks.
Great how to , I ran a Citizen L20 and a L25 about 12 years ago and will be starting a new job here in a couple weeks and found this very helpful .Thank you
I work also on A20, it's incredibly stable, it's amazing how you could start it and turn your back and just go.. i could rate this mashine on 7 stars because the work it does..hello from Germany 👋
Very nice walk-through of the tool setting process. Very helpful for our team as our ARNO Fast Change system becomes more popular. Great video!
Great video. I love it! Thank you for sharing this information.
Doesn't he work at Titan's shop now?
I do it’s crazy to look back on an old video I made on a weekend and see someone comment this!
Yea it's dope
In all my years of prgramming all kinds of machines, the Swiss style might have been the most fun as a contract programmer.
I like them the most as well. So many ways to process a part the possibilities are endless
Thanks! Really i apply that information in mi job. You should do more videos from A20 lathe.
Very good video! Thank you!
Wow Titans of CNC
lol nah. My old job in MI
Thanks a lot for sharing knowledge.
thanks for the lesson friend.
Hey Donny, great video. Do you think you'd be able to record a video on switching over to chucker mode (guide bushingless mode)?
He came a long way To titans of cnc
Thank you! It’s been an insane journey for me
Super.. THX
Great video ...
Plz show the video how to adjust guide Bush and collet pressure for both the spindle
Thank u
ruclips.net/video/MyHv4Pud0NM/видео.html
Hi IAM citizen operator please call me at this number 8962383113
Pls share full setting video
More please😀
How I can set up knurling tool in #4 (T4) ?
We will be doing a video on that ASAP. thanks for the idea!
Need to do some L32 vids
Can you please tell me the ptogram editing procedure on citizen swiss lathe
How do i convert tool dimension to standart? Any formula?
Thanks a lot!!!
Lets say the machine stopped and i want to left the tools that facing the stoke how can i do that? Go to prepration and what?
Go to manual(handle) move z out a bit, go to prepare, hit cutoff and st position then coolant, when you see hnd ****, hold down cutoff and hit the start button
How would you compare this machine to M20 or L20?
I am new operater in cincom A20
So please help me in offset
Sir,any indian distributor here in Coimbatore?
When i tried to run G71 Cycle . It's not working showing error .. improper use of g code.... sry for my bad english.. pls hlp me
I was just wondering how many people had bought a machine like this, but we're unable to use it until they found this video?
People who are experienced in running these don't watch RUclips videos to know how to use it. It's a niche artform much like extrusions.
Más videos de citizen a20
Is it not possible to probe these tools somehow? This seems like a lot of effort compared to a “normal” lathe with a tool setter
There are so many different types of tool stations that can be applied to the citizen machines with so many different stick out lengths. To make a probing system like a normal lathe would be very expensive because several would be needed for the different tool types for each spindle. Believe me I have thought that for years now for setting these things up
@@dynamicmachineuniversity2318 youd think they could make a thing that goes in the spindle with a tool setter sticking out where the stock would be
@@PetesShredder That could maybe work but there are a ton of different holders and options that go in these swiss machines that would make it hard and not cost effective to do. Once you practice it a few times its not so bad.
@@dynamicmachineuniversity2318 yeah and you would have to get it straight and level too. I’m imagining a bit of ground diameter with a four pad tool setter sticking out the end like our mazaks have
@@PetesShredder That would be sweet
Which one is better citizen A 20 or tsugami B 205
I feel sorry for anyone using a FANUC control on a Citizen machine. We have 14 Citizen machines at my shop from 12MM to 32MM. Some are A machines some are L machines. We have ONE that has a FANUC control, the rest use Citizen Cincom controls. The Cincom makes it SO MUCH easier to set up a machine VS the FANUC.
It help me .. Sir please make videos on how to take centre of all working tools, programming, c axis and indexing, how much degree is given according to material during Chuck pressure etc. Please sir I m waiting for positive response....... Thanks.
Video coming soon. Thanks for the idea!
CNC prongram
Is the L20 same as A20?
Good job, I am getting Alarm number 2007 although all doors close. Can anyone help?
What model Citizen? is it an A20? If so is it an A2-20 or an A3-20?
If you follow these instructions you never will be set up guy
This guy works for Titans of CNC now lol
Language hindi
This is not how experienced professionals setup a citizen swiss machine.
yes, there are several short cuts from what is shown.
Where can i find the professional method for setup citizen swiss lathe?