Umm go look at stangkiller performance ZL1500 you will easily change you’re mind.. I AM NOT knocking the copo truck by any means but you said nicest build you have ever seen on an automotive channel and I can’t let that slide. That trucks got over 100k into it and is beautiful. Paddle shifters, 800+ whp, full coil over front and rear, original paint job and interior. He also has built a second one that is red.
@@coltengottschalk1049 the red one originally had red interior and now it's gray...it's original style but not original to the truck...and a painted dash
I love your step by step instructional how-to approach. This is going to live on as great reference material for many people in the near and not so near future.
@@LawrenceTolman I’m rebuilding an 85 Datsun/Nissan 720 pickup with a 2.4l 4 cylinder and a 5 speed stick. Watching how you tackle issues + the tools you use gives me hope that when it’s done, it will be right. And if it’s not, I’ll keep wrenching till it’s my kind of perfect.
LT you have shown GM missed the boat ride, they should of built a factory truck similar to this, it would of sold well and would of been the talk of the town. Thankyou for the video.
Glad you like the mounts and the truck is coming along nicely! I am not sure if you mentioned it but the dipstick tube is different for the 80e vs the 60e . The actual dipstick is the same, just the tube is different. It is a great idea to actual calibrate your dipstick to your "true full" level on your transmission where your builder wants it, typically 1/8" above the pan rail by drilling a hole or scribing a new line. Fluid starving the 80e is a common source of transmission problems in the 80e since the pickup is in the front of the pan. Lastly, if you notch that middle crossmember in front of the gas tank you can drop the tcase and trans together instead of having to separate them first.
FYI, most 120v air compressors have terminals inside the pecker head for 240v. You just need to switch a few spade connectors around. It will use less electricity wired that way, will run better, and won't trip breakers all the time. You can look up the wire schematics for your motor online if they are not inside the motor already.
No doubt! Protect those ears! I've got tinnitus from my car stereo days back in the early 90's. It isn't fun now, but sure was back then. Great series on the COPO! Love that truck!
LT, you’ve got to put AC in that garage. Given the hours your spend out there and the increase in the productivity you’d gain from it, it’d be worth every penny. It’d be a business expense since you’re doing your work for the channel in there. I did that to my garage last year and put in a two ton mini split. This weekend I washed my motorcycle in a 75 degree garage while it was 102 outside here in Houston.
Wish I known there was a seal driver yesterday!!! Was doing the front output t-case seal on my LMM and it took me 5 hours and hot red sun-burned legs later to finally get it done. 10/10 won't recommend unless you're rebuilding the T-case!! Thats the end of my rant lol. COPO Truck is coming out awesome!! Might do a similar drivetrain setup on my 07 Avalanche, but stick with the 246 T-case with the 4l80. Also grabbed an 8.1 Vortec for my Mother and I's 71 Camaro Pro-street project. Can't wait to get that on the road too!!
That truck is sweet! Definitely built the way I like it as well with all factory parts. Can’t believe it’s been a year already I’ve been subscribed pretty much from the beginning and have watched this particular build from the day you picked it up , it’s been very cool LT can’t wait to see what the motor plans are for it
Yup. I'm in a dead silent garage right now with a cup a coffee and all what I hear is ringing. I definitely paid the price. I need a fan or some other white noise on to fall asleep. Protect those ears!
I’m surprised you didn’t do the poly trans mount as well. Cant wait to see how it runs with the 80e. Would be nice to see some dyno pulls to see how the RWHP compares to the 60e RWHP numbers.
I use to use a 4.5 for everything. Alway had 4 handy, skinny disc, hard disc, flap and wire. The last use years i hand myself like the fit and finish of a file and a deburing tool.
Love the COPO build so much more future potential, I think its about time you get a proper intro for the videos I'm sure it would be a fun process to make.
Love your builds keep up the good work. Lot of people don't know that if the converter isn't spaced right it can and will wipe out the pump especially if it got too much clearance. Also when I put trannys in if they have 4 or more bolts I tightened them up 180 degrees apart from each other too pull the converter up square
I'll be curious to see what works for driveshafts, my 2WD truck only required a different yoke after the 80E swap. And I have heard that a stock 2500 front shaft works for 4WD. Also, love the DTR stuff. I have his transmission mount in my 2001 2WD truck, his design is superior to others IMO - gave me tons of room when routing the exhaust system.
Lawrence LT Tolman - You must have really liked the red 88 k1500 that was build on trucks tv show. it seems to be almost exact copy to your orange peel COPO truck. I like them both. I had an 95 GMC JIMMY that was AWD and I think the next truck is going to be an AWD truck. I already have a 4l80e from a van, rebuild and convert to 4WD. I do have to say I like both of these trucks, the red 88k1500 from trucks and your copo truck. I learned alot from you and Ian over the years growing up watching on the weekends. Great Job. Keep It Up. Thank you for showing what can be done.
You make it look so easy my son tried to do a transmission swap in a 2000 Tahoe and completely missed but he learned that mechanic work is not that easy and can be very frustrating
My knee-jerk thought was to run an NP205 instead of that split-case aluminum chain driven t-case. The weight & drag might cause more problems than it solves but I come at transfer cases with an off-road mindset… I like what you’re doing though.
I've been thinking about pulling the sheetrock out of ceiling in my garage and putting a pole lift in there it'll give me enough room to lift it up High Enough with a vaulted ceiling
I usually leave the dust shield off the torque converter if it's never going to be going offroad. In my brain it's just holding heat from the converter in. With it off the converter should be able to dissipate heat better and even get a cooling effect from air going under the truck.
if it was just a dust cover, I might be convinced to leave it off for hear reasons like you mentioned, but it also acts as a reinforcement between the transmission and the engine on an LS, so I wanted to leave it in place
Pro tip: get a diamond cutoff wheel. They're like $25, they'll last you at least a year, they don't throw that nasty dust into the air, and they're not prone to exploding.
You definitely need to do some 1/4 mile runs with nothing changed but the transmission to see how much slower it is. According to everyone on the internet, that 4l80e should be a ton slower than the 4l60e. It would be cool to prove or disprove how the seemingly much worse 1st gear ratio and the claim that it takes a lot more power to spin than a 4l60 affect acceleration.
Read up on the specs of each, they arent far apart in torque, best to always build up any transmission when going beyond stock. 60 means up to 6000 gvwr, 80 is 8000 gvwr
When you get a ford guy to watch GM dominant content, you know its good. Still think you should do a mild build on the Toyota and give it away and get you over your goal of 100k subs
I have a Pro Charged AWD Silverado SS. 402 stroker, water meth boost juice. The old “built tranny” 4l65 let go. My tranny shop Ultimate Transmission in Boise said since I’m not drag racing much the 4l65 billet everything/ triple disc TC was the way to go even though I really wanted the 4l80 swap to take it up a notch in badass. The tranny shop said the lighter tranny was much less weight to spin and it would be noticeably faster. So far so good. I have had it 3 months. It went 11.99 at Firebird raceway at 2700 ft on a 85 degree day so I’m happy. Not saying the 4l80 swap is a bad move just a data point to provide. Dave at Ultimate Transmission in. Boise is the guy to talk to for more info.
great info there! I thought about doing a built 4L60 on this one, but had heard so many hit-or-miss stories about some built 60e surviving, and some lasting forever.
I wear hearing protection all of the time. I have tinnitus (ringing) in both ears from when I was young and dumb. Don't let anyone shame you into going without. It's not their hearing that's on the line. Sane goes for safety glasses. You only have 2 eyes. Instead of sunglasses, I wear safety glasses nearly any time I walk out the door at home. If they're not on my eyes, they're on top of my head. I've always got them handy.
I’m 54 and I used to work on the floor replacing transmissions and doing engines. Now I’m in daily constant pain and see a neurologist every month that I live. If you’ve got to sell something to buy yourself a lift do it. You won’t regret it when you are my age. Not preaching to you. Just hate for anyone to have to go through what I am.
I just did a 4l80 swap on my 02. i strongly dislike transmission swaps. The trans swap was a success i swapped in the 2500 radiator with a summit racing fan trans cooler. The 3 trans tunes i loaded seen really lazy shifting. It works good if i drive like a Grandma but getting in it, it takes way too long to shift.
I have both tinnitus and carpal tunnel syndrome on both sides and it is no fun at all. I waited too long to get the carpal release surgery in both wrists and because of that my gripping strength is gone. Better to look goofy or whatever than be an idiot like myself. I'm only 52 and need three more surgeries which includes the other hip replacement which is bad genetics with a life of hard work and harder play so take care of yourselves as it can be as quick as waking up in excruciating pain that only goes away with the help of a surgeon. My apologies for the book but this is a serious subject. Peace
Using the first edition 4L80 make connecting the cooler lines less of a challenge. Oh by the way, the worst transmission ever was the TH200 installed in full size G.M. vehicles. The original application of the TH200 was for the Chevrolet (Isuzu) Luv truck. Small truck, light weight.
I think I’m going to try those motor mounts. I just got my 408 dropped in my regular cab and my headers are making contact with the floor under hard acceleration. It sounds terrible! Maybe the stiffer mounts will fix it.
place your bets on the 60 foot and 0-60 changes from the 80e swap. It has a taller first gear, but now a better converter... will they cancel each other out? or, do we lose a little bit off the line?
I think the 60 foot MAY change some, but the 0-60 stays close to the same. The converter will probably help the whole 1/4 plus with the triple disc you can lock it up at the big end if ypu need a few more rpm, instead of going to 4th
COPO Truck is one of the nicest builds I have seen on any automotive channel to date. Legit all around beautiful truck.
thanks a ton, that's much appreciated!
Umm go look at stangkiller performance ZL1500 you will easily change you’re mind.. I AM NOT knocking the copo truck by any means but you said nicest build you have ever seen on an automotive channel and I can’t let that slide. That trucks got over 100k into it and is beautiful. Paddle shifters, 800+ whp, full coil over front and rear, original paint job and interior. He also has built a second one that is red.
Also forgot to mention the red one has over 1000whp and is also original paint and interior from 94
Agree!
@@coltengottschalk1049 the red one originally had red interior and now it's gray...it's original style but not original to the truck...and a painted dash
We gotta protect LT at all cost, this man's a Gm Guinness 👍🤙🇺🇸💪
And a genius!
Genius and maybe a Guinness Record...
🍻
Not just any ice cream in the fridge: Drumsticks. Sticks are unbelievable.
I love your step by step instructional how-to approach. This is going to live on as great reference material for many people in the near and not so near future.
So many bad ass builds are going to be inspired bc of LT
@@tommoon2700 ill be one of them.
Glad it was helpful!
@@LawrenceTolman I’m rebuilding an 85 Datsun/Nissan 720 pickup with a 2.4l 4 cylinder and a 5 speed stick. Watching how you tackle issues + the tools you use gives me hope that when it’s done, it will be right. And if it’s not, I’ll keep wrenching till it’s my kind of perfect.
@@Heffelz8 that's the spirit man
LT you have shown GM missed the boat ride, they should of built a factory truck similar to this, it would of sold well and would of been the talk of the town. Thankyou for the video.
Glad you like the mounts and the truck is coming along nicely! I am not sure if you mentioned it but the dipstick tube is different for the 80e vs the 60e . The actual dipstick is the same, just the tube is different. It is a great idea to actual calibrate your dipstick to your "true full" level on your transmission where your builder wants it, typically 1/8" above the pan rail by drilling a hole or scribing a new line. Fluid starving the 80e is a common source of transmission problems in the 80e since the pickup is in the front of the pan. Lastly, if you notch that middle crossmember in front of the gas tank you can drop the tcase and trans together instead of having to separate them first.
yup, great point worth touching on for sure. I showed the steps back when I rebuilt the trans, and the factory marks were about 3/4" too low
FYI, most 120v air compressors have terminals inside the pecker head for 240v. You just need to switch a few spade connectors around. It will use less electricity wired that way, will run better, and won't trip breakers all the time. You can look up the wire schematics for your motor online if they are not inside the motor already.
New plate install was smooth. Stronger and better. Got to like that. Plus an ice cream break to boot.
I cringed at 10:25 because I for some reason thought your finger was in the path of the jack going down 🤣
No doubt! Protect those ears! I've got tinnitus from my car stereo days back in the early 90's. It isn't fun now, but sure was back then. Great series on the COPO! Love that truck!
Stock 01-06 DMax front driveshaft drops right in. 20 bucks at the yard. I’ve hit it with 1600 whp no issues.
great option there for sure
LT, you’ve got to put AC in that garage. Given the hours your spend out there and the increase in the productivity you’d gain from it, it’d be worth every penny. It’d be a business expense since you’re doing your work for the channel in there.
I did that to my garage last year and put in a two ton mini split. This weekend I washed my motorcycle in a 75 degree garage while it was 102 outside here in Houston.
Ratchet n pull type straps are awesome for trans,transfers, or rear ends removal or installs… Especially when you work alone….
I'm goin to be doing the same soon. This helps !
That’s the great thing bout Gm.
This goes with that from a large year spread.
Wish I known there was a seal driver yesterday!!! Was doing the front output t-case seal on my LMM and it took me 5 hours and hot red sun-burned legs later to finally get it done. 10/10 won't recommend unless you're rebuilding the T-case!! Thats the end of my rant lol. COPO Truck is coming out awesome!! Might do a similar drivetrain setup on my 07 Avalanche, but stick with the 246 T-case with the 4l80. Also grabbed an 8.1 Vortec for my Mother and I's 71 Camaro Pro-street project. Can't wait to get that on the road too!!
sounds like a fun project! I'd hate to remove that seal without taking apart the transfer case, that would be no fun
So this is pretty much for the Trailblazer SS team. Thanks
That truck is sweet! Definitely built the way I like it as well with all factory parts.
Can’t believe it’s been a year already I’ve been subscribed pretty much from the beginning and have watched this particular build from the day you picked it up , it’s been very cool LT can’t wait to see what the motor plans are for it
Yup. I'm in a dead silent garage right now with a cup a coffee and all what I hear is ringing. I definitely paid the price. I need a fan or some other white noise on to fall asleep.
Protect those ears!
Use the bolts down thru the bracket and use flange nuts on the pan. That way you find have to take the bracket of just to change fluid and filler.
I’m surprised you didn’t do the poly trans mount as well.
Cant wait to see how it runs with the 80e. Would be nice to see some dyno pulls to see how the RWHP compares to the 60e RWHP numbers.
Nice to see you using atomic fab mounts. Richard makes good stuff.
I use to use a 4.5 for everything. Alway had 4 handy, skinny disc, hard disc, flap and wire. The last use years i hand myself like the fit and finish of a file and a deburing tool.
this is by far the coolest truck build out there
thanks a ton!
This is one of the cleanest builds I’ve ever seen.
thanks a ton!
Make the chrome on the copo truck black! Wheels and headlights !
By FAR one of my favorite channels.
much appreciated!
Come on Bendpak sponsor this guy already
Love the channel, brings back memories of Saturday morning powerblock.
Glad you enjoy it!
Love the COPO build so much more future potential, I think its about time you get a proper intro for the videos I'm sure it would be a fun process to make.
Awesome! I’m 4l80 np208 swapping my rig right now too
Definitely wear ear protection. Great advice.
Love your builds keep up the good work. Lot of people don't know that if the converter isn't spaced right it can and will wipe out the pump especially if it got too much clearance. Also when I put trannys in if they have 4 or more bolts I tightened them up 180 degrees apart from each other too pull the converter up square
Thanks, will do!
Cool to see someone else use blue demon products. I FN love them. Quality!
I got the same head light from night buddy! It's a good product !!
I'd love to see a NNBS brake swap if it works with the 4wd/AWD knuckle, and it'd be great in the start stop challenge.
You can put the 2019+ Brakes on GMT800
I'll be curious to see what works for driveshafts, my 2WD truck only required a different yoke after the 80E swap. And I have heard that a stock 2500 front shaft works for 4WD. Also, love the DTR stuff. I have his transmission mount in my 2001 2WD truck, his design is superior to others IMO - gave me tons of room when routing the exhaust system.
I have the same question on the front shaft! Rear is definitely going to need to be shortened.
I highly recommend you get a max jack lift. So that way when not in use. It can go into a corner
Really really good stuff here. Thank you
Glad you enjoyed it!
A mini split ac unit would help on those hot days. Great content
I have never heard of this. Can you share a site with me? Thanks much👍👍👍✌️✌️👌
Putting the trans on the jack before you roll it under seems great I generally can't get my truck that high and also I'm just on a piece of plywood
Lawrence LT Tolman - You must have really liked the red 88 k1500 that was build on trucks tv show. it seems to be almost exact copy to your orange peel COPO truck. I like them both. I had an 95 GMC JIMMY that was AWD and I think the next truck is going to be an AWD truck. I already have a 4l80e from a van, rebuild and convert to 4WD. I do have to say I like both of these trucks, the red 88k1500 from trucks and your copo truck. I learned alot from you and Ian over the years growing up watching on the weekends. Great Job. Keep It Up. Thank you for showing what can be done.
Oh yea, I did love the awd red Chevy we built on the show, so much that I needed to own one for myself for a while. Glad you enjoyed watching it!
You make it look so easy my son tried to do a transmission swap in a 2000 Tahoe and completely missed but he learned that mechanic work is not that easy and can be very frustrating
Kudos on the one-man-build
appreciated!
Thank you for sharing!!! Great build
Will be interesting to see if the different first gear ratio is going to affect how the truck launches...
I know, I'm excited to do another run to do a comparison
So cool LT, I hope you get some more sponsors and break that 100k mark soon!
I hope so too!
Your awesome great content and great tips. I hope you can keep doing this for years too come.
You’re killing me with those yellow headlights.
I know, I know. they need to be addressed
My knee-jerk thought was to run an NP205 instead of that split-case aluminum chain driven t-case. The weight & drag might cause more problems than it solves but I come at transfer cases with an off-road mindset… I like what you’re doing though.
I've been thinking about pulling the sheetrock out of ceiling in my garage and putting a pole lift in there it'll give me enough room to lift it up High Enough with a vaulted ceiling
You know, all of this would be so much easier if you had a friend helping....Great job filming and working solo though!
Love to watch you work, LT.
That opening line... exactly why Mighty Car Mods tagged their "First.. jack up your car."
The COPO truck is such a great concept. Im enjoying keeping it up with it.. Well done, sir! Greeting from the farm in S.C>
Ouch! I hope that rib heals quickly, brother.
me too!
Great video LT!!
I usually leave the dust shield off the torque converter if it's never going to be going offroad. In my brain it's just holding heat from the converter in. With it off the converter should be able to dissipate heat better and even get a cooling effect from air going under the truck.
if it was just a dust cover, I might be convinced to leave it off for hear reasons like you mentioned, but it also acts as a reinforcement between the transmission and the engine on an LS, so I wanted to leave it in place
Absolutely the best (not AWD)...lol... awd on RUclips. Keep up the grind LT
Appreciate it!!
Pro tip: get a diamond cutoff wheel. They're like $25, they'll last you at least a year, they don't throw that nasty dust into the air, and they're not prone to exploding.
You know there is a rule that if it's over 75* you MUST have ice cream.... It's a RULE!!
Never ever wrap a welding cable around you! Love ypur your channel.
You definitely need to do some 1/4 mile runs with nothing changed but the transmission to see how much slower it is. According to everyone on the internet, that 4l80e should be a ton slower than the 4l60e. It would be cool to prove or disprove how the seemingly much worse 1st gear ratio and the claim that it takes a lot more power to spin than a 4l60 affect acceleration.
well, we have the data from the "before" runs so we will def. get some data after the trans swap
Remove the trans pan and check the proper fill height for the dipstick.
Otherwise. Love this build. A definite ripper!
yup, we covered that when we had the trans apart for the rebuild/shift kit. my stock mark was an inch low
@@LawrenceTolman gotcha. I skipped that video. Done a few 4l80e already.
Cold beer is in mine awesome truck my good man
thanks!
Looks great. Take care of yourself.
Thanks, you too!
Strongest 4 speed gm built. Idk how many passes I have on my stock rebuilt 4l80e but on 9psi something snapped thinking input shaft 😂
Read up on the specs of each, they arent far apart in torque, best to always build up any transmission when going beyond stock.
60 means up to 6000 gvwr, 80 is 8000 gvwr
When you get a ford guy to watch GM dominant content, you know its good. Still think you should do a mild build on the Toyota and give it away and get you over your goal of 100k subs
I always test spray, then flip the can upside down and clear the nossel when I'm done.
My go to is the GM turbo 400 and NP205 with fixed yokes
also great choices!
I have a Pro Charged AWD Silverado SS. 402 stroker, water meth boost juice. The old “built tranny” 4l65 let go. My tranny shop Ultimate Transmission in Boise said since I’m not drag racing much the 4l65 billet everything/ triple disc TC was the way to go even though I really wanted the 4l80 swap to take it up a notch in badass. The tranny shop said the lighter tranny was much less weight to spin and it would be noticeably faster. So far so good. I have had it 3 months. It went 11.99 at Firebird raceway at 2700 ft on a 85 degree day so I’m happy. Not saying the 4l80 swap is a bad move just a data point to provide. Dave at Ultimate Transmission in. Boise is the guy to talk to for more info.
great info there! I thought about doing a built 4L60 on this one, but had heard so many hit-or-miss stories about some built 60e surviving, and some lasting forever.
Great video LT
Another great video. 👍
I wear hearing protection all of the time. I have tinnitus (ringing) in both ears from when I was young and dumb. Don't let anyone shame you into going without. It's not their hearing that's on the line. Sane goes for safety glasses. You only have 2 eyes. Instead of sunglasses, I wear safety glasses nearly any time I walk out the door at home. If they're not on my eyes, they're on top of my head. I've always got them handy.
Love the details
Please show what wiring changes need to be done when swapping from a 60 to a 80.
yup, plan on doing that in one of the next videos
4L85E I believe was the strongest 4 speed as the extra planetary gears and all associated gears were straight cut instead of helical cut gears.
fair point, but since its still basically a 4L80, I kind-of considered them one in the same.
May just have popped a rib out of place, ive done that leaning over stuff. Got to love aging...
I’m 54 and I used to work on the floor replacing transmissions and doing engines. Now I’m in daily constant pain and see a neurologist every month that I live. If you’ve got to sell something to buy yourself a lift do it. You won’t regret it when you are my age. Not preaching to you. Just hate for anyone to have to go through what I am.
I’m 54 also and LT will know what we mean soon! We can do it but we really don’t want too! LOL
Love the content keep it coming
I just did a 4l80 swap on my 02. i strongly dislike transmission swaps. The trans swap was a success i swapped in the 2500 radiator with a summit racing fan trans cooler. The 3 trans tunes i loaded seen really lazy shifting. It works good if i drive like a Grandma but getting in it, it takes way too long to shift.
Awesome job
That looked like a nestle crunch cone. I also, am a man that appreciates his ice cream. 😂😂😂
Wrenching on cars isn't fun when you're not injured. It's all part of the fun. Lol
I have both tinnitus and carpal tunnel syndrome on both sides and it is no fun at all. I waited too long to get the carpal release surgery in both wrists and because of that my gripping strength is gone. Better to look goofy or whatever than be an idiot like myself. I'm only 52 and need three more surgeries which includes the other hip replacement which is bad genetics with a life of hard work and harder play so take care of yourselves as it can be as quick as waking up in excruciating pain that only goes away with the help of a surgeon.
My apologies for the book but this is a serious subject. Peace
I enjoy your channel because you do real work, not a bunch of bull s%it.
appreciated!
4:43
4T65E: *menacing laughter*
I watch for the ice cream! Lol. Keep the videos coming. Love them. Your inspiriting me to build my 2wd suburban! Lol
Beautiful!!!!
If you ran the longer bolts for the shift linkage down and put the nuts on bottom wouldn’t that make it easier for trans maintenance in the future?
maybe, but I think I'd have to remove the shift bracket either way to drop the pan, so it wouldn't make a huge difference I think...
Using the first edition 4L80 make connecting the cooler lines less of a challenge.
Oh by the way, the worst transmission ever was the TH200 installed in full size G.M. vehicles.
The original application of the TH200 was for the Chevrolet (Isuzu) Luv truck. Small truck, light weight.
Thank you for wearing hearing protection. Be a great role model, and protect yourself concurrently.
I think I’m going to try those motor mounts. I just got my 408 dropped in my regular cab and my headers are making contact with the floor under hard acceleration. It sounds terrible! Maybe the stiffer mounts will fix it.
They def hood the engine in place better than stock
Great job.
Thanks!
I’m 23, and I always wear hearing protection when hammering or using grinders, as well as safety glasses. I don’t want to be deaf and blind at 50 lol.
It’d be cool to see you do a burnout like ken did in the Hoonicorn, just to prove it’s awd lol. Plus, the views
we're gonna give it a shot lol...
I feel horrible watching you do all that work. Wish I was there to help!
LT: "You should wear hearing protection!"
My ears: "Eeeeeeeeeeeeeeee....."
#tinnitus
My hearing loss came from stereos, guns, water brakes on the kitty hawk, concrete saws, and hilti guns.
place your bets on the 60 foot and 0-60 changes from the 80e swap. It has a taller first gear, but now a better converter... will they cancel each other out? or, do we lose a little bit off the line?
Add a 100 shot to help get you off the line then cut it at 60foot or the 330?
I think the 60 foot MAY change some, but the 0-60 stays close to the same. The converter will probably help the whole 1/4 plus with the triple disc you can lock it up at the big end if ypu need a few more rpm, instead of going to 4th