Это видео недоступно.
Сожалеем об этом.
Centroid Acorn CNC: How To Setup Lathe Tools
HTML-код
- Опубликовано: 18 авг 2024
- www.dropbox.co...
Set Part Z Zero 2:47
Set Part X Zero 7:54
Set Tool Z Offset(s) 12:27
Set Tool X Offset(s) 19:06
Set Reference Return Point 24:12
Thank you for taking the time to film the video and do the cheat sheet!!! You got a like and subscribe from me.
Can you explain how to set boring bars please.
You're videos are brilliant and massively helpful. Thankyou
I got a ? How do you set the lathe up as a gang tooling. And how do you make it automatically run the next tool rather then ask to change tools thanks hope to here back
Hello Franco, I found this video so useful and have successfully completed my tools. I am having a problem though that involves tooling and Intercon. I’m not getting the right finished diameters. It’s very frustrating and Ive spent several days trying to get the correct result. If I code my self for simple turning its fine. Looking at the GCode it produces it seems to be taking twice the depth of cut. I have tried using radius as well as diameter and I’m stuck. Any ideas? Mike
Thanks for taking the time to make this video. For tool check positioning is there a way to move the Z first them the X or only the Z?
I have a gang lathe also and both axis moving a once may cause a crash depending on tooling setup.
Nice work Brad!
martyscncgarage Thanks Marty.
At about 11:15, are you entering the radius or the diameter of the work after skim cutting?
Another excellent video! Thanks
You are welcome. I'm glad you liked it.
For the Z axis why can't you just put a dial indicator in the spindle, touch off your first tool and zero the indicator. Then simply bring each tool up to the dial indicator and make the appropriate adjustment. It's much faster and more accurate than goofing around with the feel of shim stock.
All in all I think your videos are excellent.
Hi. You certainly could do that and it would work just fine. I tried to follow what was described in the manual to help establish common ground and a point of reference. Thanks.
Hi Franco,
Was thinking of building a lathe similar to the one you have just set up. I would like to use a servo motor for the spindle motor. Can the Acorn be configured to use step direction for spindle control.
This video will be very useful in setting up the offsets.
Thanks Dave.
Dave Bassett Hi Dave. It is really easy to control a VFD with the acorn 0 to 10v analog output. I suspect there is a way to control a spindle with step direction but the Centroid guys will have to confirm. I'd check out the forum.
Great video Franco! Can you comment on whether you have to do this process each time you load a new stock. I am wanting to produce maybe 40-50 parts per day and it would be a pain to have to do this each time I insert new stock.
Hi. You only need to do this when you power up your machine.
@@FrancoCNC You have to do this entire process every time the machine is powered up? Or you just have to set part zero on your master tool on machine start up? Setting up all your tool offsets on every power up is terrible!
@@ktaylor678 No, you only have to define your tools once. If you have good limit switches, all you need to do on power up is home out your machine. If you don't have limit switches, then you need to touch off your master tool on power up. But all of the other tools will be good to go.
Nice Video! One question... how do you set the Z axis with a tool like Thread insert- cut off- round nose for facing. Cheers.
Well, that is a good question. For threading, I just eyeball it when I'm working at home. At my day job, I'll put the tool on a comparator or a measuring system like that and measure the distance from the cutting edge to whatever I'm able to touch off of. Then, I'll adjust the offset by that amount.
Alt B doesn’t do anything on my centroid acorn
Hi Sir
I just got set up Centroid Arcon. But I do not know how to run a program. can you help please.
I have the pipe chuck in 4th Axis. And Need to drill hole on different angle and distance with X travel .
Thanks you very much for your help.
Tony
I think you may want to look at the support forum: centroidcncforum.com/viewforum.php?f=60
Franco how do you set up the tool reference for your drill or tap or center drill (your tool #3 in the video)? Could you explain or show a video about it? Thanks
ruclips.net/video/K5xjzFy8vEY/видео.html
Thanks a lot Franco. Very informative. Great job.
Great video btw :)
How do you import a geometry for ex a pawn and then use lathe templates?
I'd use Fusion 360 and post CNC code directly out of that software.
I would like to male a similar configuration in my lathe. Is the software free?
Trying to learn Not free. But, I think the price is fair.
Franco, thanks for your help across the Acorn ecosystem. I'm trying to get a mix of ATC and Gang to work, thread is here, how do I get X to flip over for a tool that needs come in from the top (and therefore swap the X+ direction to X-? Thanks. centroidcncforum.com/viewtopic.php?f=60&t=2119
Please Read...
I am a long time subscriber to your channel and enjoy the videos that you produce. However, because of the policies of youtube and their direction of not allowing free speech of many groups including conservative view point, Christians, libertarians and free thinking contributors I have decided to unsubscribe for all the channels that I view, and delete there apps from all my devices. This is not a reflection on your content which I like very much but a statement of action against youtube. I hope that you will post your videos with other providers that will not deny or restrict your freedom of expression in the content you produce. There is a new site called real video that will provide just that but whatever new site you post videos I will look forward to watching them again. We all need to stand together and not allow a handful of people or companies to dictate what is truth or what content we are allowed to view no matter what your view point is. I am going to post this message with each channel that I subscribe to just let them know that the issue is not with you but with youtube. Thank you for all the great content and the work you put into your channel, Hope to see you elsewhere on the net...
Thanks
MH