EASIEST WAY To Fill Gel Blaster Mag | Gel Blaster's GELLET DEPOT grows, stores & dishes out ammo
HTML-код
- Опубликовано: 7 фев 2025
- Why You NEED this Gel Ball Dispenser | Gel Blaster's GELLET DEPOT grows, stores & dishes out ammo
▼ WHERE TO BUY -
▶ Get 10% off at GelBlaster's website when you use coupon code DANIEL50302 gelblaster.com...
▶ GELLET DEPOT on Amazon - amzn.to/3Udvhib
▶ GEL BLASTER SURGE (Get 10% off at GelBlaster's website when you use coupon code DANIEL50302 ) gelblaster.com...
▶ NEWEST GEL BLASTER SURGE VERSION (Amazon) - (V3) amzn.to/3BtXUBx or (V2) amzn.to/3aMynZd
▶ GEL BLASTER SURGE XL (Amazon) - amzn.to/3F83WcE
▶ AMMO (Gellets) 5 pack (50,000 rounds) - amzn.to/3zFdzKz
▶ UNLOCX Official Website - myunlocx.com/?...
▶ UNLOCX V1 Pistol Blaster (Blue, White, Orange): amzn.to/3BgcWuB
▶ UNLOCX V2 Pistol Blaster (Black, Yellow):
▶ Original UNLOCX 4 in 1 Gel Blaster (With stock and barrel extensions): amzn.to/3Bfgugr
▶ UNLOCX Ammo 22000 Rounds: amzn.to/3wZseBd
▶ UNLOCX Ammo 132000 Rounds: amzn.to/3Rmg8uj
▶ Ammo 5 pack (50,000 rounds - 3rd Party - Cheaper) - amzn.to/3l9L6sp
▶ Ammo Orange 10 pack (100,000 rounds - 3rd Party - Cheaper) - amzn.to/3BOu0pK
▶ Ammo Blue 10 pack (100,000 rounds - 3rd Party - Cheaper) - amzn.to/3aMyZxZ
▶ Revision Locust Goggles - amzn.to/3B25bae - www.bradleyssu...
▶ Lipo Battery Bag 240x190x60mm Size - amzn.to/3NzCZju
▶ SentrySafe Fire and Water Resistant Bag for Documents, 5" x 11" x 15" - amzn.to/38X6BbX
▼ VISIT OUR WEBSITE
▶ Products we make: soulbuilt.us
▶ Engineering: www.engineerab...
▼ FOLLOW US ON:
▶ Instagram: / soul.built
▶ Facebook: / soulbuilt.us
Why You NEED this Gel Ball Dispenser | Gel Blaster's GELLET DEPOT grows, stores & dishes out ammo
#gelblaster #surge #splatrball #gel #gellets
The products shown here were purchased by me with the intent to use them. I did not receive any free items, and I am not being paid or compensated for this review. The video, description, and comments may contain affiliate links. If you click on a link, I may receive a commission. Money earned helps to support my channel and bring you more informative videos about engineering, crafting, and DIY
What's your favorite way to fill mags? ▶ WHERE TO BUY GELLET DEPOT - amzn.to/3Udvhib
❤❤❤❤
I spend like 20mins trying to close the strainer all the way and I finally got it because of you thank you so much. Liked and subscribed
I love my Depot. Thinking about ordering a couple more.
Here's the secret. You have to physically tip the depot so it faces slightly up so you don't crush gels in it. And you also should shake it when you're draining the water.
Thanks for tip, I do tilt and shake for draining, and that works well.
that's pretty handy. I use those squeeze water bottles with the pour spout (or the condiments squeeze bottle, just exacto knife the tip to size for gellets; also I prep orbz in a bucket and transfer them to the squeeze bottles) or scoop from bucket and car oil funnel (although some you may have to use wire cutters to clip the tip to size for orbeez)
I have one, and it's really cool that it can be used like a funnel on it's own. It makes reloading both the standard 400 round magazines and the 1200 round (modded, thanks!), srb400 mags. Especially nice because my first srb broke a gear or more in the gearbox, meaning I now have 2 standard mags and a drum mag to fill. Still waiting to hear on if brand name gel blaster gearbox assemblies (lightning etc) can be put in to fully replace the gearbox on the srb400.
yo what size is standard for orbe-s
absolute must have.
Its super satisfying to fill the mag with the depot
Cool Video! Really like the channel intro with the stop animation of the cassette tape. Clever!
6:40 - 6:50 that poor little bug got slammed 😭🤣
RIP 🐜
heres a tip i do for mine, just tip the bucket back when you are done filling your mags to avoid smashing
RIP to the bug at 6:50 😂
*At the back of gel container
Bro got demolished 😭
cool product. execution on that latch/drain leaves a lot to be desired.
Serial commenting at this point, I have noticed that any of the brands of gel balls you can buy at normal retailers like walmart, in the US, are all prone to having pre busted orbeez in the pack.
Good to know. Hardened gel balls don't seem to have this issue.
I love your intro! 😮
I need this I getting a gel blaster for Christmas
I just used a ziploc bag to soak em a collapsible colander best way to strain, any bowl big enough to hold both the mag and your hand to scoop will suffice less money spent at the store
Anybody else try the old fashioned speed loading way airsofters do it?
5:11 im calling the ant bobithy and the ant on the bottom at 5:19 is going to be named jeb
Dang those line on the orbes
The ants said “I wanna watch too”
Hi, got a question do i really need to buy the official ammo from the Splatrball site for my splatrball gun? And if not can i buy other brand ammo or does it effect the fps in sort of way?
You can use any 7.5mm ammo. Higher quality, harder ammo will perform better than Splatrball's fairly generic ammo.
Thanks.
How much does it cost 💲
I love mine way better then my old ones and I picked mine up at target along with my starfire xl
In Aus we all just use the black speed loader bottles for loading mags
Unfortunately, we don't have those here, unless we order them from Zhenduo.
so from what im seeing in this is that its not really the containers problem it is the place you are using it on, i mean if you were to use it on a plastic table you could move the mags in different wats, the way it crushes the beads on closing it sucks though, would buy it
Even when I use it on a table, I end up pulling it out such that it balances on the edge, and shaking it a little.
@@engineerable dang they might need to make a v2 with a longer exit piece
I wish i woulda thought about it first prolly gonna make millions
6:50 R.I.P ant
One tip I would say is to leave some water to make the dispensing smoother
The water self drains, and the balls stay wet on the surface. You don't want excess water in your mags or hoppers. All the water should be drained before dispensing. Otherwise it can damage your mag or blaster.
@@engineerableright
Can I use the brand gel blaster beads on my splatrball
Any 7.5mm ammo will work (7-8mm)
I bought one and it does NOT close at the bottom all the way, i can store gel balls in here but you
CANNOT grow them in here... i guess it varies if you get a good one or not. mine leaks like crazy.
@Rashad Howard That sucks, it sometimes happens to mine when they sit with the valve closed for a while. The rubber seal on the door has come off. Push it back on the door and make sure it's properly sealed. It's a bad design I only discovered after making the video
@@engineerable got mine from Walmart yesterday and fresh out the box it leaks
@@rashadhoward3903 That sucks, it sometimes happens to mine when they sit with the valve closed for a while. The rubber seal on the door has come off. Push it back on the door and make sure it's properly sealed. It's a bad design I only discovered after making the video
far out man!😃
What do I do mine won’t stop leaking from the bottom
I recently noticed that the gasket can get stuck to the opening. Pull it out with your finger and reseat it on the door. Seems like a major flaw, because it will continue to happen once in a while.
Oh that's what this is for. I have been putting hair gel in mine.🤔🤭
Gel balls also make good hair gel
@@engineerable only LA looks for me.
I got a black red slr m4 cqb can it also fill that one
Probably yes
I have this and it is very hard to open and close
The dispensing flap? Yeah, I mention in the video that it's not as easy as it should be.
Imagine if someone made a mod with this was the ammo storage of a top magazine gel blaster
That would be crazy! Crazy heavy!
@@engineerable Mounted turret mode: Activated.
my mag doesnt have a top open part only of the sides
That sucks.
The ants be like: OHH WOW WHAT U GOT HERE… oh thats a can and a GEL Mag so bigg
2:55 so.. what you're saying is.. is that the bucket can get knocked down, just to get back up again, and that you're never going to keep it down?
(cues Chumbawumba song)
😂
very satisfying
How long to put them in
He killed the ant!
Rest in power 🐜
Quick question can you replace the splat gun gearbox with a v3 metal airsoft gearbox?
In theory yes, however there are some modifications required and replacing some parts with Gel blaster specific parts.
Anybody have a link for better quality gellets?
Here's a list of the best gel balls www.engineerable.com/single-post/best-gel-ball-ammo-for-gel-blasters-7-5mm-or-7-8mm-diameter
@@engineerable thank you
This is for adults?
Depends on the blaster. The pistol blasters are weaker and good for kids. The rifle sized blasters are stronger and good for teens and adults.
I have a gel blaster to play with my boys. They will remember it for the rest of their lives. I also own two Hasbro lightsabers to battle with them too. Great fun!! 👍
I can’t believe gel blasters are illegal here in australia
They’re quite literally just little bits of jelly, and not to mention, they are a kids toy, how does that work out?
Yeah, that sucks.
Oof you must not live in Queensland because you can get them here
Lollipops are next on the chopping block! 🤯
Do you service gel blaster for people ?
Sorry, no, I only make videos of modding.
Hey j have a question my slatrball will skip some bullets like i shoot and it shoots but it skips some i did let the ammo for 4 hours what can i do
Full auto, single fire, or both?
Both. When i shoot in single it takes a lo g time to shoot a bullet out and when its on full auto it skips some bullets it shoots but it skips them do you know what i can do?
thats realy cool
How long does it take to get 10K to 6-8 mm
Let them soak for 4 hours.
For its price it’s not worth it, maybe if it was like 5$ but it’s nothing special and anything else has just the same speed and consistency tbh. just my op tho 🤟
What do you use?
@@engineerable water bottles 😂 work great and are portable, you can also drain em easily and squeeze the air out them so they don’t crunch and rattle while you running💯plus the small back pack i run with already has 2 water bottle slots for quick reload
@@lebthot5787 Makes sense for personal use. I hope this bucket will be better for gel blaster party with friends who are novices and make a mess with bottles. I've had a lot of spills when playing with friends. Maybe I'll put a 5 gallon bucket under this to catch F ups.
@@engineerable good call fr, i’ve personally just never played a style where i’d be able to retreat to a fixed position to reload with one of these. new people do be spilling a whole bottle in the car
@@engineerable bottles are better
what you need is the black bottle gel speed loader you can pour the gellets into the bottle and use the spout to load the gellets whithout loseing any.
I'm gonna make the 3L bottle version of that, otherwise it's go crazy refilling that little bottle. We go through 10,000 gels in no time.
3:10 “slams contraption into table. (Not even a minute later) “so it seems that some of them are already broken since being grown”
😂 the gels are not nearly that fragile...
@@engineerable it was a joke
@@Candlelitsepulcher ahahaha, got it, others have commented that and I think some are seriously thinking it did break the gels. Sarcasm is hard to read.
a sealed tab in front of the spout that slides upwards wouldve been a much better way to control the gel balls.slide it a little up to only let the water out, then slide it out fully to finally let the balls themselves out. then you can just slide it back down to close it with no loses. That tab is just asking for an eventual snap
Yes, I also found out that the gasket will sometimes stick and come of the flap which causes it to leak until replaced properly
:O High Capacity Magazine-Clip.
its biodegradable?
What, the ammo?
@@engineerable yes
Tips over the entire bin 3-4 times
'Something I noticed is that some of the balls are already broken'
The gel balls are not that fragile. If they were, it would be a problem.
Unfortunate, this wouldn't work on our Aussie magazines, they have a much smaller fill hole. Otherwise this looks like a mad little gadget.
Back to the good ol' milky whites in a 2L orange juice bottle for me then!
I've heard the bottles you all use for filling the mags are better/faster. The issue I have is draining and getting the gels in those bottles without spilling a ton. Maybe I should use the Gellet Depot to fill the speed loader bottles.
A water bottle does the same thing for a fraction of the fraction of the price
Can I have a joe blaster
I see no reason to buy this why I would need it, can’t i just use a bottle and have an extra bottle cap that got drain holes that aren’t big enough for the gel balls?
You can, and I used bottles before this. This just simplifies the whole process.
cant you just make your on diy one with one of those wine thingies
Sure
@@engineerable cool
I didnt het a funnel with mine
Sucks, but should be easy to make with some thin plastic. Cut and bend the plastic window from product packaging to make your own funnel
Gel blasters have changed my life and not in they way you’d think
You think I’m going to say ( they changed my life so things are fun)
No what I mean is when someone tells me to touch grass I can’t the moment I go outside the entire neighborhood shoots me with those guns and it hurts worse then a nerf gun and you might say well it’s just some kids
Here’s the thing they go around the neighborhood passing theses guns out to shoot
I’m not risking a day in the hospital to bruises and injuries
WTF bro?
3:24 they are broken probably cuz you slammed it over a bunch
Gels are not that fragile. Throw one at the ground, and it will just bounce. Many don't even burst on impact. Those are broken from the package.
Mine leaks
The rubber seal on the door has come of. Push it back on the door and make sure it's properly sealed. It's a bad design I only discovered after making the video
@@engineerable tried that and it won’t properly seal all the way I’ve pushed it on as hard as I can it still leaks… kinda sucks
@@rashadhoward3903 when I said push, I mean that the seal needs to go over a mushroom like piece of plastic to lock it in place on the door. If it's not seated properly it will continue leaking.
I just use soda bottles
I have one... I made the mistake of leaving it open the first time I used it and lost 5,000 gels 🤦🏾♂️🤦🏾♂️🤦🏾♂️
Whoops, yeah it would be nice if it was spring loaded shut
@@engineerable have you tried the softien gel blaster yet? If so can u do a review on it? because I've been thinking about buying it
@@donaldmott4213 I recommend buying something better quality. Check out this list www.engineerable.com/single-post/what-are-the-best-gel-blasters-of-2023
@@engineerable I seen a couple that I liked, the unlox v2 pistol seems good, I didn't see the vector on there though, I wanted to get it too but it looks gas powered, and I don't want to hurt someone
Maybe... and hear me out, maybe... some broke when you repeatedly knocked the container over onto the table!?
They're not that fragile.
THE BUG GOT KILLED RIP 😢
It’s not flowing because you don’t have it opened all the way.
some smashed maybe because you kept dropping the damn thing on the table? lmfao
😂 if the gels we're that fragile...
Was i the only one watching the ants die
Nope, I never noticed it myself, until a ton of people started commenting about being an ant killer
SEE 1200
You forgot the SRB-375!!!!!
Would probably work fine.
rather buy the black bottle, cheaper
I wonder why they’re already smashed you were literally knocking the thing over
😂 the gels are not that fragile.
Are gel balls like this dangerous to the environment? I know people assume they aren’t, but I’ve also heard of issues where a bunch go down a drain and clog a neighborhood’s sewers, or places where they’re left in fields and when it rains they swell up and animals eat them. Are we SURE they degrade over time? I thought it was like, a weird crystal,
There bio degradable and they burst on impact 👍
Tilt it back an it wont smash the gel balls
Bro has inf gel balls
This is nothing...
Tons of user error in this video
or they could have smashed when you were throwing them around like a rag doll
They're not that fragile
def not work the price
or you could just buy a speed loader from tactical edge 💀
The speed loader bottle is probably faster to load a mag, but you still need to grow the gels and strain them. This is an all in one solution. Also, why don't they make the speed loader bottles clear so you can see how much is in there?
@@engineerable I dunno, I think the black is just for asthetics tbh
@@engineerable I wonder if there is a clear 3d printing filament that you could make one with
@@KeysNoE I was thinking about 3D printing a nozzle that fits over a clear soda bottle's cap. Still have to soak, drain, and get the gels into the soda bottle though.
@@engineerable what if you did it inside the soda bottles? Maybe had a little slider to drain and stop gels from getting out
all right now shoot every single round that you loaded
That's what your mom said... 😂 (username ✔️ out)
It's to expensive
This is cap Mine leaked immediately
Sucks! I noticed that the gasket on the door flap can come off. I never had the issue, but others who didn't know what they were doing managed to get it to come off. Check that.
$289 No thanks!!!!!!
That’s crazy
This is such a waste of money
6:50 damn ant killer
One of my splatrballs is fuckedup. Every time I shoot the gel balls break
Maybe a problem with the tappet plate. Could be bent, but that usually only leads to not firing. First thing to try is hardened gel balls like the Warinterest 3.0
@@engineerable thanks I’ll try those. And it came out the box not firing.
@@cityoftrees9953 If it did that from new, then it's likely a dud. I had one that didn't shoot consistently and returned it. Later I figured out that it's the tappet plates are already bent sometimes and doesn't pull the nozzle far back enough to load a gel ball.
@@engineerable man it said don’t return to the store or I would have. Now I’m stuck tryna make it work smh. May just try to return to the company.