When reinstalling body on the pan, did you have clearance the body at the upper shock mounting bolt access hole? The 3 way kafer cup bar bracket interfered quite a bit. I had to increased the length of the oval hole and slightly reshape the three way bracket so it could pass through without hitting.
The assembly itself really only sits on the frame head one way. You've got a little wiggle room with trimming to get it squared up but that's about it. You might be able to move it back with a good bit of cutting and depending on how much your willing to change to accommodate that. But no without substantial modification there isn't room to move it back.
Nice to see some super beetle mods on RUclips. Nice setup.
Looks like I have to sell my beetle to buy a front suspension
This is going to be a sweet car 🤙 🇺🇸
When reinstalling body on the pan, did you have clearance the body at the upper shock mounting bolt access hole? The 3 way kafer cup bar bracket interfered quite a bit. I had to increased the length of the oval hole and slightly reshape the three way bracket so it could pass through without hitting.
does this fit the standard beetle or do i need to modify the body?
Nice job.. question, when installing the front end can you reduce the wheelbase a little? stock is 94.5 was there room to reduce 2"?
The assembly itself really only sits on the frame head one way. You've got a little wiggle room with trimming to get it squared up but that's about it. You might be able to move it back with a good bit of cutting and depending on how much your willing to change to accommodate that. But no without substantial modification there isn't room to move it back.
They are mendeola suspension
Off road😊
How did this bug turnout
Is this a mod you will Bo for customers or are you just building race cars
How to get a set
Any update?
were you buy the suspension
Www.coolrydescustoms.com
Don't see any suspensions on their sides
@@cobusvanniekerk83 Call the number on the site
Where can this front end be purchased
www.coolrydescustoms.com