Thanks for your instructions ! It was very helpfull and easy to understand. I was only confused when i tryed to understand the manual witch came with the game. So glad i found your video on youtube. Now it works like i want it to!👏👍🏻
How do you traverse the setup menu if you don't have a service button control? I can get to the setup menu by turning dip 4 on but the games normal gameplay buttons and joystick don't do anything when in the initial menu that says push S2. I have no S2 button obviously. Thanks for any help!
THANKS DUDE....i have lots of questions i am new to the arcade world but love it.....can you tell me how to fix ANOLOG OUT OF RANGE 15.7KHZ/60 HZ i upgraded my monitor and sad results
Birşey sormak istiyorum.bu orjinal jamma boardin yerine gelen bir ürunmü? degilse günumuzde yerine gelen bir urun varmi?pandora box kesinlikle ayni kalite degil.ilginç 30 sene önceki kaliteyi yakalamayimiyoruz.orjinal jamma kartinin tepkimesi hicbir kartta ve emulatorde gormedim.siz biliyorsaniz yaridmci olurmusunuz?
Thanks. I’m on vacation and the rental co has one of these machines in the house but they have no idea how to make it work. I’m a fuckin’ nerd so I took the back off of it and then watched some videos about it....now we’re playing games. Maybe I should charge them for my time 😂
Can someone help me? I purchased a 60-1 Blee and i seem to have wired it correctly as the lights flash solid green after power up and blinking green on the second light but the games never seem to start up. It always boots to service screen and I have verified that the dip switch #4 is off and not in service mode. I have two of these boards and it seems to be doing it with both boards. I also have multiple harnesses. One player and two player harnesses. Please Help, thanks!!!
My monitor says ICD/System Test /Hardware Check Ok...and the board has one green LED and a blinking orange light. It seems to be stuck in boot up mode. Do you think it's a bad board?
So i want to connect this pcb and use it out of the cabinet walk me through what to connect where,the ac box ( power)or cani use 5 v phone power?and do i need a jamma connector?, how to hookup a single joyatick thank u in advance
I have this game. Had it for years. It stopped working. I have gotten a new board. I have the dips set properly. I cannot get it to show on the screen. I have tried on a monitor and I’ve tried on a flat screen. It doesn’t show up. The leds are as follows. Next to track ball ports , top one constant red. Two below the red constant orange. To the right of all three, one constant green. I can’t get it to work. Thanks n
yes keep dip 3 on (up) to save the HIGHEST score on each game the only thing is that the machine will keep the high score but steal your initials its programmed this way
I just got the galaga countercade and I want to put A 60 in 1 jamma board to my countercade but don’t know how to. Don’t know what I need to do this mod can you please help me
how , i was wandering because it looks like i'll have to mount my monitor side ways can i do anything to be able to mount my monitor horizonal and have the game switch to horizonal apprecate any ideas , my name is tom
Sorry, but this PCB is intended for vertical games only. You WILL need to have your monitor vertically oriented if you want to play on it. If you want to play games on a horizontal monitor, plenty of multi boards exist for that (i.e. Pandora's Box or 19 in 1)
Игры
Thanks for your instructions ! It was very helpfull and easy to understand. I was only confused when i tryed to understand the manual witch came with the game. So glad i found your video on youtube. Now it works like i want it to!👏👍🏻
Awesome thanks for the time taken on this. Appreciate the info. Much easier to understand!
thankyou! Just what I needed :D
How do you traverse the setup menu if you don't have a service button control? I can get to the setup menu by turning dip 4 on but the games normal gameplay buttons and joystick don't do anything when in the initial menu that says push S2. I have no S2 button obviously. Thanks for any help!
hello, question, hot do I enter setting? I do go to test page, nothing moves with buttons or joystick. ..I only see test page colors
Black Knight (11 years later)!
well done!
hooking one of these up and i cant get it to play anything to the monitor, any suggestions. the monitor is just black
What is the pinout for the white molex connector ?
Thanks man!! :o)
THANKS DUDE....i have lots of questions i am new to the arcade world but love it.....can you tell me how to fix ANOLOG OUT OF RANGE 15.7KHZ/60 HZ i upgraded my monitor and sad results
Birşey sormak istiyorum.bu orjinal jamma boardin yerine gelen bir ürunmü? degilse günumuzde yerine gelen bir urun varmi?pandora box kesinlikle ayni kalite degil.ilginç 30 sene önceki kaliteyi yakalamayimiyoruz.orjinal jamma kartinin tepkimesi hicbir kartta ve emulatorde gormedim.siz biliyorsaniz yaridmci olurmusunuz?
Thanks. I’m on vacation and the rental co has one of these machines in the house but they have no idea how to make it work. I’m a fuckin’ nerd so I took the back off of it and then watched some videos about it....now we’re playing games. Maybe I should charge them for my time 😂
Can someone help me? I purchased a 60-1 Blee and i seem to have wired it correctly as the lights flash solid green after power up and blinking green on the second light but the games never seem to start up. It always boots to service screen and I have verified that the dip switch #4 is off and not in service mode. I have two of these boards and it seems to be doing it with both boards. I also have multiple harnesses. One player and two player harnesses. Please Help, thanks!!!
My monitor says ICD/System Test /Hardware Check Ok...and the board has one green LED and a blinking orange light. It seems to be stuck in boot up mode. Do you think it's a bad board?
So i want to connect this pcb and use it out of the cabinet walk me through what to connect where,the ac box ( power)or cani use 5 v phone power?and do i need a jamma connector?, how to hookup a single joyatick thank u in advance
Thank you!! I could not figure the service switch out! Had to kill the annoying demo music
I can't get out of the I/O screen in test mode using dip switch 4..should I hook up a test switch to the harness itself ?
Videogamerdaryll yes... you press the test button to advance past it.
Hey can you get in touch with me with me about initial setup in the test screen
I have this game. Had it for years. It stopped working. I have gotten a new board. I have the dips set properly. I cannot get it to show on the screen. I have tried on a monitor and I’ve tried on a flat screen. It doesn’t show up.
The leds are as follows. Next to track ball ports , top one constant red. Two below the red constant orange. To the right of all three, one constant green. I can’t get it to work. Thanks n
What are the S1 S2 S3 S4 buttons?
do anyone know what VSDISPLAY HD-MI Video controller i need for the new arcade1up xl that has the 19 inc BOE Model DV190EOM-N12
Please help, I did this but now only my monitor turns on nothing else.
so, with dipswitch 3 we can save high score?
yes keep dip 3 on (up) to save the HIGHEST score on each game
the only thing is that the machine will keep the high score but steal your initials its programmed this way
My is resetting over and over .what I need to do
Can u message me how to hookup a joystick to it
I just got the galaga countercade and I want to put A 60 in 1 jamma board to my countercade but don’t know how to. Don’t know what I need to do this mod can you please help me
search up diyretroarcade on youtube. Good tutorials and they also sell a lot of the stuff necessary to do that.
Why does my centipede fire by itself,,,anyway to fix this ???
@Ste H thanks...I had a short, it's working properly now
How do you adjust the volume ?
that small round brown plastic thing below the vga and above left of the dipswtich blue box..just turn it with a screwdriver..
I'm getting a NO VIDEO SIGNAL on boot
how , i was wandering because it looks like i'll have to mount my monitor side ways can i do anything to be able to mount my monitor horizonal and have the game switch to horizonal apprecate any ideas , my name is tom
Did you figure out how to rotate the games so we don't have to have the monitor on its side?
Sorry, but this PCB is intended for vertical games only. You WILL need to have your monitor vertically oriented if you want to play on it. If you want to play games on a horizontal monitor, plenty of multi boards exist for that (i.e. Pandora's Box or 19 in 1)
60 in 1, red green flashing when powered up ? why ????
Pickle check
pickle check