@@profer0z279 i am not positive for injection models, but a lot of carburetted models have a gas shut off valve (also called a petcock), just set it to "off" and you won't pump any gas in your tire but if you get any in the tire (whatever's in the float or in the tubes) normally it shouldn't cause problem to the tire, it's not like you spray acetone or some other such solvent
I will be 70 YO next April.....I am just now beginning to realize that I should not have sat at the back of every school room I was in....... I am putting together the air hose today.....It will have a permanent home on the inboard side of one of my Tusk boxes on my KLR. I am sooo glad to be a subscriber.... Yer pretty smart.....Fer a youngster! LOL
Start the engine on 3 cylinders and the fourth is an air pump. Fill that tire in no time at 6k!! lol I know from plenty of experiences, that cb350 will run on one cylinder no problem.
@@gueto70 The spark plugs are in between the engine and the tank, so in order to access the spark plugs, the whole tank needs to be removed, in that case you're better off finding a real pump. Lol.
As always, Ryan and the whole FortNine crew putting out extremely high quality content for us all. FOR FREE. Thank you so much! Hope you all are staying safe, healthy, and sane 😁👍
@@stopstalkingyouspookybastard somebody still has to allocate all the production funds, request products, run the website, edit, schedule trips and test rides... while those are specifically related to video content, I'm sure there is also a FortNine warehouse where they ship/store their in-stock products that they sell on their website. I was apart of a company like FortNine a few years ago and our video production crew consisted of 5 people at MINIMUM. There was a lot of behind the scenes work I had never been apart of but thankfully got to see in the works. (I was tasked with "Brand Relations", which is basically the allocation of products, vehicles, and the like.
Lesson learned the hard way: Any time you crank an engine with the spark plug removed, give that spark someplace to go. The easiest thing to do is pop the plug back into the end of the ignition lead, and wedge the plug up into the chassis. If you don't do this, the ignition will still make sparks, but they will be forced to arc through the dielectric insulation in your coil, leaving pinhole burns, and another possible path to ground. Your engine becomes hard to start, but idles OK, and then stumbles and misses when the throttle is opened wide. The only cure is a new coil.
They've taken a right turn into very high quality. There's been a few videos in the past where he went over the top and i was scared the future was film student mediocrity. Seems like they went back to what made this channel awesome a few years ago, refined it, and brought us some really easy to watch content.
I legitimately NEVER comment stuff like "good job" or "love your content", because truthfully, I think RUclips promotes extremely low-quality content, and that's what 99.9% of it is. But your content man. Seriously, amazing. Your production quality is absolutely top notch, miles better than television even. 800K subs is nothing to gawk at, but you're seriously destined for something BIG with this quality, some networks gotta pick you guys up eventually.
How are these F9 videos so freaking good Everytime! Everytime I see it in my feed thinking "Oh cool another F9 vijeo." But by the end I'm just blown away by the simple, classy, elegant showmen ship. Maybe it's a Canada thing...? Thank you F9...thank you.
One thing is that they don't neccessarily release videos every week just for the sake of it. They release one when they have something that's worth it. Most RUclipsrs should take note.
@@zedpoutine they have that freedom as the YT channel does not live on it's own merit, as it's just a branch of F9, which sells MC clothing and accessories. many RUclipsrs do that because they made the error to rely on YT to make their bread, and the only way to make money on YT is to post everyday and hope enough people see your vids to that the check you get from YT actually pays the taxes, this is why a lot of them get sponsorships nowadays as it pays well (we are talking up to 6 numbers per video)
It never ceases to amaze me the length you're going to explain something seemingly simple yet so complicated. And the crazy thing is I understand it by the end. Awesome job guys!!
Forth Grader? I must have been massively stunted as I did not discover the Powered Torch until 6th grade. But again: Again: Good Job RyanF9! I see the comment regularly that this is the best Motorcycle related content on YT but after nearly exhausting your library I am convinced you have the best "Do-It-Yourself" content on the Inter-Web! I watch everything from Auto-Centric to Xylophone Repair and Race/All Terrain/Off Road/4X4 to DIY of every topic and I do not see the consistent high quality and creative thoughtfulness of F9. Nobody, Nowhere, Knowhow
I am really happy that I have subscribed. I know many tricks regarding motorcycles but FortNine keeps surprising me with new stuff I have never heard about. That cant be said about many youtube channels. Great content!!!
Dnepr (Ural) off road rider trick: Carry a small bicycle pump with you, one of those whose with 2 openings, so it can work on more or less any type of valves, even tho these might seem to be inefficient at pumping a tire up to around 30PSi, it is plausible, especially if you have an old motorcycle with an inner tube. on the other hand, you can get a foot or hand pump, specially made for pumping either car or motorcycles tires, for around 30USD online, that can be quit compact and efficient.
Any recommendations for a specific model? I've been thinking about getting one for the car to top off a few psi if necessary, if it's completely flat it's time for the spare / professional help anyways. But everything I've found so far looks pretty flimsy, and life is too short for shitty tools . . .
just found this channel. It's absolutely underrated. The filming, editing, content and the presentation are great! Hope you get more subs and views in the future!!!
First off excellent video just watched before I finish my coffee and go for my morning walk. For some reason this video makes me feel old, considering I'm coming up on 43 years of riding motorcycles, I think of all the flat tires I had and mended over years, every motorcycle I have own has had a least one or more flats on it. I don't consider it tire repair most if not all kits are just to get you on the road. I'm old enough to remember when the shops repaired tires and not automatically just sell you a new one I learned how to do inside patches and plug in Motorcycle Mechanics School, my old 1983 Kawasaki GPZ 550 repair manual even had a section in it on how do it. I have tried just about all the repair kits on the road, the ones with the rope type plug, glue, and the T-handles the break first you use them, I've patched tubes, I have carried the CO2 kit, a small bicycle hand pump and even at one time had that valve thing that screwed into a spark plug and supposedly pumped air into a tire, the one time I needed it to work it didn't. I even used one of those foot pumps, people with bad knees and ankles (like me) shouldn't use those. Currently I use Dynaplugs and one of their pumps the kit fits into a small case. I do like the chucks and air hose setup I might have to make one up I got an old bicycle pump Im not fond of. 😆 The fire thing I've seen videos of Russian truck drivers doing that. FortNine is definitely a 👍 I shared this video on facebook.
tell Aneesh i love him just as much as i love you Ryan and everyone else at Fortnine, just bought a new pair of gloves and brake lever from Fortnine.ca, thanks again, keep the content coming.
My 3 bikes have a compact bicycle pump stowed as well as a string kit. I learned many years back that those little gas bottles are a sad, frustrating expensive waste of time and money. Love your clips Ryan.
That compression tester to tire pump idea is genius. I just have to make sure to remove my other three spark plug boots first but with the electric start... I need to go make myself a little kit right now for my bike
Hey Ryan, can you guys do an updated video on good beginner gear. I know you did one a few years back but some of those items aren't available anymore and there seems to be a lot of new offerings on the market.
Falih Ikram Excellent idea. All the help new riders can get actually will benefit us all in safety and fun. I've been a biker since I was born, riding since 1968. It's good to meet and help new bikers. It's a way of life!
My recommendation would be to look for higher end used gear. There tends to be a lot of great stuff on eBay and the likes for a fraction of the price if you're willing to spend a little time searching and don't mind something that's been worn before. I'd still recommend getting a new helmet though.
Ryan, my dude.... You are WAAAAYYY TOO GOOD AT THIS! I for sure watch your videos for the info but low key I just admire your work. Each video is a masterpiece.
Thank you for so many short movies during this quarantine! Without FortNine i would be bored to death, I LOVE your short movies, calling these just videos would be just disrespectful. Good job.
I managed to seat (then inflate to pressure) my front tire with a bicycle pump. It was a real pain trying to pump fast enough, then filling the whole tire. Good reminder to not let the pressure get that low next time!
I don't even ride motorcycles but this channel is a favorite. I love the personal asthetic. You guys film intros that remind me of better call saul and breaking bad
yeah I was rummaging around wholesale bikes that my dealership is going to get rid of that I just managed to snag myself like 3 45 gram cartridges and a Chuck, goes perfectly with the dyna plugs I carry everywhere
This channel and Ryan are the gold standard of infomatic auto entertainment online. I wish he starts a topgear kinda show with bikes, as i can totally see him pulling this off.
Kudos to the FortNine team for ANOTHER great video! The "Proof of Concept" written on the balloon was the sort of humor (I know...for you, it's "humour") I've come to know and love. I'm glad you're part of the motorcycle community!
Would be a good idea to shut the fuel off to the carbs and hold the engine at full throttle, or for efi pull the fuel pump fuse. Gasoline in the tire just sounds bad.
I am absolutely amazed by your amount of knowledge. Subtle references to decades old events with pretty much no words wasted. Absolutely amazing video quality.
It hurts that I also know the Chemical reaction that heptane has when it’s completely combusted in oxygen... it also hurts that Ryan is a better chemistry teacher than the one i’ve got... Chemistry with Ryan series confirmed?
I really need to say i love this Channel, it got me into motocylces, i own 2 now. Greetings from germany, ride safe everyone, and special greetings to FortNine you guys are awesome!!!
Brilliant, creative, entertaining and fantastic as usual. Because of my mechanical skills, my road repair kit consists of credit cards and a cell phone (and a Spot when I stray too far from civilization.). You are The Best, Ryan!
Great vid as always, thanks mate! One small error though : the bottle isn't freezing because of something endotermic, because there are simply no reactions at all. These are simply the consequences of the ideal gaz law (PV=nRT) . #mytwocents
my pony pump seats the bead of my tyres every time. I change my tyres myself, jumping between Anakee Adventure and Anakee Wild on my R1250GSA and I never go to a tyre station to inflate and seat the beads. I always use my portable little pump connected to the DIN plug (that I’ve connected directly to the battery, bypassing the CAN-bus). This pump fits nicely in the tool box fitted to the bike. I also carry there some material to repair tubeless punctures.
So many lovely touches to this video and lots of information that is nowhere else on the web. Im gonna try the tire to tire bead seating. Fingers crossed it works
You should only do this with a fuel injected engine, just take of the injector electrical connector. With a carburated engine you will also pump fuel into your tires. Not so good... (I love my old boxer)
Good morning to you FortNine,,, I just want you to know how much I enjoy your videos. I got my 1st road bike in 2019 of November the 22nd I believed I bought her home.. She's a 2013 Trumph Street Triple S. No restrictions making between 107, to 111 HP. She has been tinkered on some but for the most part is stock. If you have any tips for me I'm trying to get a RUclips channel going. I know many people ask you to check out there channel's,,,you may not have time and I understand.. Never the less I think you're great dude,,, Thank you for your wonderful. videos. Stoney
I've done beed lock trick with gasoline (all I had) and it works but is scary as hell. I also observed the tire go flat almost immediately, just as you predicted. Great video
Never disappointed when watching a FortNine video. Come for the MC knowledge, stay for the science. Stoichiometry, check. I mean seriously, when was the last time you saw a RUclipsr pull out a chalkboard and actually make sense? Well done, Mr. FortNine, love your channel! BTW, a spare tire from a passing car makes for a great reservoir of air. Looks like it is time for a trip to the hardware store!
1 dislike? I think its the same person disliking every video on youtube....Show me any youtuber who makes such great, usable and precise content...Superliked and shared.
Mate, I always hook the compressor to the valve running for an unseated tyre. Looks and sounds impressive when I light the flame. 50 plus times no fails. Had a paddock car we used to do this to as it always had a flat.
Is it possible to inflate the tyre by CO2 from the exhaust via a tube to the tyre ???😉 Edit : actually some genius have done this already 😂😂😂😂 👉ruclips.net/video/d2b2x_sUQcc/видео.html
Hi there FortNine,thank you for some great tips,if you suffer a flat tyre & dont have an inflator at hand,thank you friend,keep the fab videos coming 🙂🙂🙂
"I bet you already own a siphon hose"
Well... I've been watching this channel for over 2 years and I still don't own a motorcycle :D
Same here lol
Then the hose will be much less costly than the bike.
All Roland's have a great sense of humor!
@@kozy41 looooooooool! Loved your response xD
Been watching since way before I got mine. Worth every moment.
You just won't understand this until you've seen it play out. ~RF9
Will try and report.
1000IQ
I see what you did there ...
Cool video!
What shoes are those at the beginning of the video Ryan? Looking for a new pair of casual riding shoes. Those looked prerty cool.
"ay ryan, take the tire and walk along the shore for cinematic purposes"
"for how long ?"
"ill tell you when to stop" *giggity*
KEEP GOING!!!
FURTHER!!!
HAVEN'T GOT THE SHOT YET!!!!!
A LITTLE BIT MORE!!!
A little more! A little more! And we're done. Ah Shit i wasn't recording.
"An internal combustion engine is basically just an air pump", they said.
And FortNine listened.
Does the sucked in fuel cause any problem in the tire?
@@profer0z279 I was wondering the same thing!
I would think as long as your fuels shut off then it shouldn’t be to bad
@@profer0z279 i am not positive for injection models, but a lot of carburetted models have a gas shut off valve (also called a petcock), just set it to "off" and you won't pump any gas in your tire
but if you get any in the tire (whatever's in the float or in the tubes) normally it shouldn't cause problem to the tire, it's not like you spray acetone or some other such solvent
@@quentintin1 For injection models just unplug the fuel pump relay
This explains chemistry better than my teacher. Congrats.
Him doing the reaction formula made me even miss chemistry 😂 😂
@@11erikson For real I suddenly missed highschool because of that part.
"This" giggity
Balanced that reaction like a pro
That seems to be a low bar to overcome ;-)
I will be 70 YO next April.....I am just now beginning to realize that I should not have sat at the back of every school room I was in.......
I am putting together the air hose today.....It will have a permanent home on the inboard side of one of my Tusk boxes on my KLR.
I am sooo glad to be a subscriber.... Yer pretty smart.....Fer a youngster! LOL
3:48 - My in-line 4 engine with top mounted spark plugs and no kick starter just laughed at my face.
Start the engine on 3 cylinders and the fourth is an air pump. Fill that tire in no time at 6k!! lol I know from plenty of experiences, that cb350 will run on one cylinder no problem.
@@gueto70 The spark plugs are in between the engine and the tank, so in order to access the spark plugs, the whole tank needs to be removed, in that case you're better off finding a real pump. Lol.
plug in the exhaust to the tyre then
fidel catsro serious question. Is that actually a good idea? Would it work? I mean it's CO2 but what about the rest of chemicals?
@@cellshaded this guy is talking out of his ass. The exhaust isn’t just an engine fart. It’s the lungs of the engine. You wanna choke out your engine?
As always, Ryan and the whole FortNine crew putting out extremely high quality content for us all. FOR FREE.
Thank you so much! Hope you all are staying safe, healthy, and sane 😁👍
and somehow without some stupid ass sponsor
The ad revenue is real and these serve as ads to an extent to be fair.
@@GameCyborgCh Without some sponsor like some motorcycle store that would be called FortNine and their logo would be this channel logo... Oh wait.
fyi, the whole fortnine crew is ryan and the dude with the camera. they do all the work
@@stopstalkingyouspookybastard somebody still has to allocate all the production funds, request products, run the website, edit, schedule trips and test rides... while those are specifically related to video content, I'm sure there is also a FortNine warehouse where they ship/store their in-stock products that they sell on their website.
I was apart of a company like FortNine a few years ago and our video production crew consisted of 5 people at MINIMUM. There was a lot of behind the scenes work I had never been apart of but thankfully got to see in the works. (I was tasked with "Brand Relations", which is basically the allocation of products, vehicles, and the like.
Lesson learned the hard way: Any time you crank an engine with the spark plug removed, give that spark someplace to go. The easiest thing to do is pop the plug back into the end of the ignition lead, and wedge the plug up into the chassis.
If you don't do this, the ignition will still make sparks, but they will be forced to arc through the dielectric insulation in your coil, leaving pinhole burns, and another possible path to ground. Your engine becomes hard to start, but idles OK, and then stumbles and misses when the throttle is opened wide. The only cure is a new coil.
Chris Kelsey putting on your kill switch gets rid of this problem, specially when doing it with a starter.
Holy poop you just just solved a stumbling problem I've been having. Thank you
Makes sense. On my lawnmower there's a spike on the engine head meant to hook the sparkplug wire on while your diagnosing it.
@@javierarchila7173 On a motorcycle, absolutely.
well if your on the road there is actually an easy temporary fix by coating the surface with oil and wrapping it with electrical tape..
I love Fortnine's video production quality and witty humor while also keeping it educational. Keep up the good work:)
They've taken a right turn into very high quality. There's been a few videos in the past where he went over the top and i was scared the future was film student mediocrity. Seems like they went back to what made this channel awesome a few years ago, refined it, and brought us some really easy to watch content.
I legitimately NEVER comment stuff like "good job" or "love your content", because truthfully, I think RUclips promotes extremely low-quality content, and that's what 99.9% of it is.
But your content man. Seriously, amazing. Your production quality is absolutely top notch, miles better than television even.
800K subs is nothing to gawk at, but you're seriously destined for something BIG with this quality, some networks gotta pick you guys up eventually.
Why is this man explaining chemical equations, moles and adnospheric pressure better then my teacher.
then? i guess you were never paying attention anyway
This donator tube, works nice when you are taking air from near by parked cars ;)
Hey! We do not speak of that.
Oh! Now I want one!
I once cut my aorta shaving, and I used this donator hose to syphon blood from strangers in the street. Literally a life saver.
they won''t notice in their cages anyway until its time for a service
You aren't supposed to say it out loud? The cages don't even notice a few liters of missing air!
Correct way to watch F9 videos:
1. Like video
2. Proceed to video
I think what you meant to say is:
1. Like video
2. Share video with fellow riders
3. Proceed to video
@Rod Rebman Not necessary...the merit is assured.. :)
How are these F9 videos so freaking good Everytime! Everytime I see it in my feed thinking "Oh cool another F9 vijeo." But by the end I'm just blown away by the simple, classy, elegant showmen ship.
Maybe it's a Canada thing...?
Thank you F9...thank you.
One thing is that they don't neccessarily release videos every week just for the sake of it. They release one when they have something that's worth it. Most RUclipsrs should take note.
@@zedpoutine they have that freedom as the YT channel does not live on it's own merit, as it's just a branch of F9, which sells MC clothing and accessories.
many RUclipsrs do that because they made the error to rely on YT to make their bread, and the only way to make money on YT is to post everyday and hope enough people see your vids to that the check you get from YT actually pays the taxes, this is why a lot of them get sponsorships nowadays as it pays well (we are talking up to 6 numbers per video)
Another AvE watcher here, or was vijeo accidental?
I find it egotistical to think you've uploaded because it's my birthday. But I'm very happy nonetheless, thanks F9 team!
Wishes fam
Happy birthday! ~RF9
@@FortNine I see this as an absolute win. Thank you!
@@kozy41 Lockdown has me limited on 20 square kilometers of mostly city roads... Not very fun on a Versys 650... Thanks though mate!
happy birthday dude 🏍️
I'm 100% positive that I will never try any of these methods to inflate a tire, but boy was it fun to watch as always!
Survival Tip: Keep a well charged smartphone at all times so you can stream FortNine videos in a pinch
It never ceases to amaze me the length you're going to explain something seemingly simple yet so complicated. And the crazy thing is I understand it by the end. Awesome job guys!!
Found this channel through the "Top 5 bad used motorbike signs"
Absolutely love the production quality. Love it!!
One more proof that Ryan is Bear Grylls for motorcycles.
Even better
Don't drink the coolant!
@maned wolf with a gmail account Ok, than Kyle Hill for motorcycles, how's that.
MacGyver
@maned wolf with a gmail account Les Stroud is the real deal
Forth Grader? I must have been massively stunted as I did not discover the Powered Torch until 6th grade. But again: Again: Good Job RyanF9! I see the comment regularly that this is the best Motorcycle related content on YT but after nearly exhausting your library I am convinced you have the best "Do-It-Yourself" content on the Inter-Web! I watch everything from Auto-Centric to Xylophone Repair and Race/All Terrain/Off Road/4X4 to DIY of every topic and I do not see the consistent high quality and creative thoughtfulness of F9. Nobody, Nowhere, Knowhow
Best production quality on RUclips, thank you :)
Ryan is the GOAT of motorcycle information. Thanks again.
So impressed! Chemistry, common sense, and wit! Can't get better.
I am really happy that I have subscribed. I know many tricks regarding motorcycles but FortNine keeps surprising me with new stuff I have never heard about. That cant be said about many youtube channels. Great content!!!
Dnepr (Ural) off road rider trick:
Carry a small bicycle pump with you, one of those whose with 2 openings, so it can work on more or less any type of valves, even tho these might seem to be inefficient at pumping a tire up to around 30PSi, it is plausible, especially if you have an old motorcycle with an inner tube.
on the other hand, you can get a foot or hand pump, specially made for pumping either car or motorcycles tires, for around 30USD online, that can be quit compact and efficient.
bicycle pump it is. takes some time. but its very small and reusable. not like those co2 canisters.
Any recommendations for a specific model? I've been thinking about getting one for the car to top off a few psi if necessary, if it's completely flat it's time for the spare / professional help anyways. But everything I've found so far looks pretty flimsy, and life is too short for shitty tools . . .
just found this channel. It's absolutely underrated. The filming, editing, content and the presentation are great! Hope you get more subs and views in the future!!!
First off excellent video just watched before I finish my coffee and go for my morning walk.
For some reason this video makes me feel old, considering I'm coming up on 43 years of riding motorcycles, I think of all the flat tires I had and mended over years, every motorcycle I have own has had a least one or more flats on it. I don't consider it tire repair most if not all kits are just to get you on the road. I'm old enough to remember when the shops repaired tires and not automatically just sell you a new one I learned how to do inside patches and plug in Motorcycle Mechanics School, my old 1983 Kawasaki GPZ 550 repair manual even had a section in it on how do it.
I have tried just about all the repair kits on the road, the ones with the rope type plug, glue, and the T-handles the break first you use them, I've patched tubes, I have carried the CO2 kit, a small bicycle hand pump and even at one time had that valve thing that screwed into a spark plug and supposedly pumped air into a tire, the one time I needed it to work it didn't. I even used one of those foot pumps, people with bad knees and ankles (like me) shouldn't use those.
Currently I use Dynaplugs and one of their pumps the kit fits into a small case.
I do like the chucks and air hose setup I might have to make one up I got an old bicycle pump Im not fond of. 😆
The fire thing I've seen videos of Russian truck drivers doing that.
FortNine is definitely a 👍 I shared this video on facebook.
tell Aneesh i love him just as much as i love you Ryan and everyone else at Fortnine, just bought a new pair of gloves and brake lever from Fortnine.ca, thanks again, keep the content coming.
When riding in a group there’s always a pedant with a pump.
Always carry a 90 degree valve adapter. It’s needed at most forecourt tyre pumps.
Well, then just replace "riding group" for "nearby parked cars"...
My 3 bikes have a compact bicycle pump stowed as well as a string kit. I learned many years back that those little gas bottles are a sad, frustrating expensive waste of time and money. Love your clips Ryan.
I learnt so many things, but I don't even own a bike. What am I doing here!
You are here because you enjoy quality video's as opposed to clickbait
Plus it will be more fun once you get one!
You are learning! About tire inflation techniques, about chemistry, and about the artistic mastery of the Fortnine team.
Preparation for when you get one!!
you are being entertained and informed, all for the price of a free cup of coffee
That compression tester to tire pump idea is genius. I just have to make sure to remove my other three spark plug boots first but with the electric start... I need to go make myself a little kit right now for my bike
I’ve done the fire measure in order to seat a semi tire once before, it’s terrifyingly awe inspiring when it happens.
Nice but do I have to remove tire
This is one of the most practical videos on roadside motorcycle service I've seen; nice job FortNine!
The Right Stuff line filled me with so much damn joy!
Wow, these are some serious MacGyver tricks! Kudos to you, Ryan.
I don’t even comment anymore because how many “Wow this great”’s do you do before it loses its meaning?
But, wow, this is great.
This is the first channel that makes me feel like getting involved and commenting. Thanks for the info and humour
Hey Ryan, can you guys do an updated video on good beginner gear. I know you did one a few years back but some of those items aren't available anymore and there seems to be a lot of new offerings on the market.
Falih Ikram Excellent idea. All the help new riders can get actually will benefit us all in safety and fun. I've been a biker since I was born, riding since 1968. It's good to meet and help new bikers. It's a way of life!
My recommendation would be to look for higher end used gear. There tends to be a lot of great stuff on eBay and the likes for a fraction of the price if you're willing to spend a little time searching and don't mind something that's been worn before. I'd still recommend getting a new helmet though.
Cycle Gear
Just buy used gear my dude.
Ryan, my dude.... You are WAAAAYYY TOO GOOD AT THIS! I for sure watch your videos for the info but low key I just admire your work. Each video is a masterpiece.
"...go all Lockhead Starfighter and eject its chuck." I'm stealing that!
Thank you for so many short movies during this quarantine! Without FortNine i would be bored to death, I LOVE your short movies, calling these just videos would be just disrespectful. Good job.
Use the first method to steal tire pressure from parked cars🤣
I managed to seat (then inflate to pressure) my front tire with a bicycle pump. It was a real pain trying to pump fast enough, then filling the whole tire. Good reminder to not let the pressure get that low next time!
Thanks, Ryan fantastic content and a lot of drama for a flat tyre :)
I don't even ride motorcycles but this channel is a favorite. I love the personal asthetic. You guys film intros that remind me of better call saul and breaking bad
yeah I was rummaging around wholesale bikes that my dealership is going to get rid of that I just managed to snag myself like 3 45 gram cartridges and a Chuck, goes perfectly with the dyna plugs I carry everywhere
I watched a trucker in Brazil use lighter fluid to seat the bead on a big truck tire. KABOOM! It worked!
As always, great content. Thank y’all
This channel and Ryan are the gold standard of infomatic auto entertainment online. I wish he starts a topgear kinda show with bikes, as i can totally see him pulling this off.
Legend has that Ryan is still walking with the rear tyre in hand.
Actually Ryan walks on water motorcycle-wise. Kevin.
Kudos to the FortNine team for ANOTHER great video! The "Proof of Concept" written on the balloon was the sort of humor (I know...for you, it's "humour") I've come to know and love. I'm glad you're part of the motorcycle community!
Would be a good idea to shut the fuel off to the carbs and hold the engine at full throttle, or for efi pull the fuel pump fuse. Gasoline in the tire just sounds bad.
Wow. A comment about the topic of the video on FortNine channel? I thought they are forbidden here, since every other one of them is useless.
And also, ground the sparkplug wire to prevent coil damage
I am absolutely amazed by your amount of knowledge. Subtle references to decades old events with pretty much no words wasted. Absolutely amazing video quality.
It hurts that I also know the Chemical reaction that heptane has when it’s completely combusted in oxygen... it also hurts that Ryan is a better chemistry teacher than the one i’ve got... Chemistry with Ryan series confirmed?
A RUclips channel like this (quality content) should have more subscribers.
Being that I'm a chemistry major I enjoyed this very much haha.
Such a good channel guys!
Bruh.... Do something like... "cheap bike, Big adventure" like u did in $500 bike video.... We're waitin for one 👌👍👌👍👌
FortNine, the MacGyver of motorcycling. Thanks!
Really good cake 🍰 advice 👌😎 with good icing entertainment 👍
I really need to say i love this Channel, it got me into motocylces, i own 2 now. Greetings from germany, ride safe everyone, and special greetings to FortNine you guys are awesome!!!
In a word... fantastique!
Thats a nice makeshift compressor you made there removing the sparkplug. Who would have thought! Genius stuff man.
Great work 🖖
Brilliant, creative, entertaining and fantastic as usual. Because of my mechanical skills, my road repair kit consists of credit cards and a cell phone (and a Spot when I stray too far from civilization.). You are The Best, Ryan!
Great vid as always, thanks mate!
One small error though : the bottle isn't freezing because of something endotermic, because there are simply no reactions at all. These are simply the consequences of the ideal gaz law (PV=nRT) .
#mytwocents
"Endothermic" is not just a chemistry term, it can apply to any process that sucks up heat. He's using it correctly.
my pony pump seats the bead of my tyres every time. I change my tyres myself, jumping between Anakee Adventure and Anakee Wild on my R1250GSA and I never go to a tyre station to inflate and seat the beads. I always use my portable little pump connected to the DIN plug (that I’ve connected directly to the battery, bypassing the CAN-bus). This pump fits nicely in the tool box fitted to the bike. I also carry there some material to repair tubeless punctures.
Love from India mate!
Still killing it with the best MC content online. Go Canada.
As a cyclist I can tell Co2 cartridges are a rip-off even for us.
$5 for a pack of 10 that you'll use over the course of 3 years, maybe if you ride a lot? Not really a rip-off IMO
Get them from a culinary, pet, or paintball supply they're dirt cheap there
I’ve used ether for years on my farm to seat tires, and never thought about the science involved till now. Thank you!
last time i was this early, ryan has vstrom for his bike
So many lovely touches to this video and lots of information that is nowhere else on the web. Im gonna try the tire to tire bead seating. Fingers crossed it works
3:50 Why not run the Engine on the remaining cylinder(s) ? Am I missing something?
You should only do this with a fuel injected engine, just take of the injector electrical connector. With a carburated engine you will also pump fuel into your tires. Not so good... (I love my old boxer)
Good morning to you FortNine,,,
I just want you to know how much I enjoy your videos. I got my 1st road bike in 2019 of November the 22nd I believed I bought her home..
She's a 2013 Trumph Street Triple S.
No restrictions making between 107, to 111 HP. She has been tinkered on some but for the most part is stock.
If you have any tips for me I'm trying to get a RUclips channel going.
I know many people ask you to check
out there channel's,,,you may not have time and I understand..
Never the less I think you're great dude,,, Thank you for your wonderful.
videos.
Stoney
this is mind blowing 👍
I've done beed lock trick with gasoline (all I had) and it works but is scary as hell. I also observed the tire go flat almost immediately, just as you predicted. Great video
At the end I thought Ryan was going to huck that dead tyre into the river when he picked it up
Never disappointed when watching a FortNine video.
Come for the MC knowledge, stay for the science. Stoichiometry, check. I mean seriously, when was the last time you saw a RUclipsr pull out a chalkboard and actually make sense? Well done, Mr. FortNine, love your channel!
BTW, a spare tire from a passing car makes for a great reservoir of air. Looks like it is time for a trip to the hardware store!
i like it, all about tire inflation then at the end you throw a valve on the floor to go into someone elses tire lol
Love the channel. Love the content. Bought a Tee and a sticker to support it. Keep on keeping on Ryan and the F9 crew
Instructions unclear, houses now on fire...
Never have i ever glad that i aced chemistry through junior and high school until today. Seeing mole counting again brings back memories
This is some truly MacGyver S*!T !! 👍🏍️
1 dislike? I think its the same person disliking every video on youtube....Show me any youtuber who makes such great, usable and precise content...Superliked and shared.
Yo Cameraman..High-5
Mate,
I always hook the compressor to the valve running for an unseated tyre.
Looks and sounds impressive when I light the flame. 50 plus times no fails. Had a paddock car we used to do this to as it always had a flat.
Is it possible to inflate the tyre by CO2 from the exhaust via a tube to the tyre ???😉
Edit : actually some genius have done this already 😂😂😂😂
👉ruclips.net/video/d2b2x_sUQcc/видео.html
The rarely seen cameraman.
Great video as always. Now I have another couple things to add to my bike backpack kit.
YES! FIRST!
you were actually first gg
Hey Ryan,
You never stop to amaze, simple practical solutions for every day problems which people face.
Keep it up buddy
“How to inflate your tire without a pump”
*Don’t deflate them*
The best quality videos on RUclips
First
your quality and the story telling is top notch..
Great idea, lets pump some fuel into the tyres lmao. using the engine to pump up a tyre isnt such a smart idea
Why not? Gotta keep those tires toasty in the twisties
Nothing To See Here Beats the hell out of walking out of the bush etc
@@mistaepik should be marketed as a feature
Hi there FortNine,thank you for some great tips,if you suffer a flat tyre & dont have an inflator at hand,thank you friend,keep the fab videos coming 🙂🙂🙂