How To Fix AIR BUBBLES In A POOL (Pool Pump Troubleshooting) | Swim University
HTML-код
- Опубликовано: 19 июн 2024
- Do you have air bubbles shooting out of your pool return jets? You’ve likely got air in your pool pump system. Luckily, it’s easy to troubleshoot. Here are 3 ways to fix air in a pool pump.
💦 Download our pool maintenance video course and save money with the promo code VIDEO: www.swimuniversity.com/pool-c...
🏊♂️ Our Favorite Pool Maintenance Gear: www.swimuniversity.com/pool-m...
⏰ Timestamps:
00:00 - Introduction to How To Fix Air In A Pool Pump
00:32 - How Does Air Get In A Pool Pump?
00:49 - #1. Check Your Skimmers
01:39 - #2. Check Your Pump
02:43 - #3. Check Your Unions
📡 Subscribe to our channel if you want more information on swimming pool and hot tub maintenance: / swimuniversity
Swim University has made swimming pool and hot tub care easy for more than 10 million homeowners. And each year, we continue to help more people with water chemistry, cleaning, and troubleshooting. We know taking care of a swimming pool or spa can be difficult. And it’s hard to find a trusted source of information. We get it! This is the reason we created Swim University.
😎 Visit our website for more in-depth information on swimming pool maintenance: www.swimuniversity.com/ Хобби
We hope this helps you cure bubbles coming out of your pool return jets! Remember, air in your pump system likely means there's an issue at one of three places: the skimmer, your pump or your unions. And if you need more help with pool maintenance, grab our free Pool Care Cheat Sheet at www.swimuniversity.com/cheatsheet
Will air bubbles burn up a motor if left for a long time?
Also check for your automatic pool cleaner hose if its crack/hole. Check the pressure gage/relief valve above the filter for loose, broken oring, crack near stem. Check the valve handle regulator if its leaning more than 45. Check also the drain plug o ring from pump. I have a first hand experience with the above problem so I am relating it to you, took me a long time to find it.
You're a pleasure to listen to....such clarity !!! 👏👌💖
The Best advice as usual. Thanks SU!!!!
Thank you for all the information. 😊
Thanks clear and to the point
Thanks! My weir door was the issue. Your video solved my problem!
Your videos are the best!
Thanks
I have a question. My sand filter has a leak right where you screw on the lid and the side of where the chlorinator is at. Could it be leaking there because I don't have pvc pipe going to the pool and it is weighing the tubing down this creating more pressure on that side of the lid?
If you have a salt water chlorinator, the byproduct of the chlorinator is gas/air. Troubleshooted this issue for some time, turned off my chlorinator briefly and the issue stopped. All other advice covered in this video is accurate.
Thanks for sharing!
Thank you! It has helped!
Glad it helped!
This was helpful…thank you
Glad it was helpful!
Is cavitation from the impeller a thing? Could an unbalanced impeller cause bubbles?
Thank you mate. Just solved my problem.
Cool. Out of curiosity, where was your air coming it??
Would I get air bubbles if I drained my pool and refilled it. Will it stop after running for a few.
Es buen artículo baja la temperatura del agua siempre y cuando la luz solar esté presente
Odd situation (at least for me). I have a 3 line manifold going into my pump. A 3 way valve in from pump separating main drain (spa) to rest of pool. When I close the spa main drain, I get air bubbles and pressure actually drops. If I open it even half way, pressure RISES and bubbles go away. Closing Skimmer and /or vacuum valves do not cause bubbles to appear. Not sure where issue lies. Any help would be greatly appreciated.
What happens if cavitation only happens during certain pop-up cycles? for example my pump gets extreme cavitation only when certain cycles are on. the rest it runs perfectly quiet. I can't figure it out!!! help!!!!
Whenever I first turn the pump for the day (usually I turn the pump on and off twice in any given day) bubbles emerge from the return jest at first (for about 10 or 20 seconds), but then -- after 10 or 20 seconds -- the bubbles subsided and disappear. Is that normal?
what if the bubbles are only coming from one of the jets?
Same issue here
Same issue. Any update?
It can be a hole inside of the pipe that comes out of that jet
Could just be the closest jet from your system and it only comes out of there before diverting to the other jet. Good way to know is to block the jet and see if the bubbles come out the other one
When you turn off the pump and listen to filter if it has gurgling sound, chances are the the band clamp of the filter needs tighten, might be loose, use wrench to tighten it,, not hand tighten not enough. The gauge too on top need inspection if it has crack stem worn gasket loose, pump relief o ring might be broken. Check if weir is stack, check if hoses are broken, low water should be middle of skimmer port minimum. All of this I have encounter on bubble coming out of the return jet.
sometime it is something very simple ,like plugged filter in your universal wall connector that is hidden and can not be seen till you unplug it,
I've just got a saltwater pool. My brother in law has had his for years. He only puts salt and a small bag of shock every once in awhile. And his pool seems to do great. Can you use only salt and no other chemicals?? I've been doing the same as him and when I test it it stays pretty close to the norm's. Was just asking your thoughts. Thanks great videos
If you don't have any issues and your levels are normal, that's great. But one of the common problems is high pH. Check out our other video about Salt Water Pool Maintenance to see if you're ticking all the right boxes: ruclips.net/video/2y7NsSdI818/видео.html
Check “Jandy” valves at suction side, they can be sucking air through valve stem or lid “O” rings.
I suspect mine air is coming in suction side. What are these valves you speak of?
Ok I see- the valve on top my filter. So you mean… where the water enters the valve?
I have crackling in the diverter valve. It's in all positions. The bolts and nuts are tight. Is that an indication of a leaky valve seal?
Also, my pump was off for 2 days. When I went out to turn it on, the water was perfectly clear. I was surprised! I turned the pump on and a few hours later I had algae all over the bottom in the dips... All the chemicals are balanced. I have a feeling the sand is contaminated.
Your thoughts and recommendations...
If it's a sand filter, when was the last time you backwashed or changed your sand?
Its always a problem on the sucktion side of the pump that's creates bubbles..
One of our pool guys was like “take the weirs off.” Told a story about one jamming shut, starving the pump…. I suppose checking the pool regularly would prevent this though.
How do you get the air out once you fix the problem? Is there a way to ‘burp’ it?
Firstly what’s the cause of the bubbles? If its in the pump that will natural blow out as time goes on until you clear the pump basket and let the air in. When you prime the pump if it needs to be primed fill it up as much as you can to reduce the bubbles. If it’s inside the filter itself the air will be at the top so there should be a bleeder vavlue you can open to bleed air and close it when water starts to spray out. If it’s another cause follow the video and see what happens and if it fixes anything . If you think you fixed it wait for around an hour and see if the return keys have less bubbles or no bubbles at all
My bubbles are giant and only when I first start the pump then there are no air bubbles at all after the initial start up. Everything checks out OK as far as the 3 main causes. It only just started doing this a few days ago and I can't figure it out. Any other suggestions?
You probably have a seal where the pipes join together go bad. Pressure release on top of filter need to be in the proper locked position too.
When lubricating "O rings, don't apply lubricant as shown in video, as this will STRETCH the "O" ring and you will not get a positive seal.
Pat or dabble it on, working it around the rubber seal.
Thank you, great video
I noticed air blowing out of the jets, told my pool guy and he finally told me he turned the vacuum up so it would go up the walls. Now my skimmer isn't pulling water in and the amount of air blowing out is crazy. He said it is fine but I disagree. Any thoughts? Unfortunately I don't know how to turn the vac back down (I have only been a pool owner for a year so please no one blast me for not knowing). Thanks
Those vacuum/skimmer valve have to be right or cavitation. Play first about 45 degree, adjust until no longer bubbles.
@@Sal112350it's always the comment section that solves the problem lol. You are 100% correct, even if I don't understand the science behind it. I had my return/vacuum valve sending too much pressure to my vacuum. I adjusted it so that it wasn't overpressuring my vacuum and all the bubbles went away.
I had air bubbles when I opened my above ground pool a few weeks back. It was driving me crazy. It turned out it was the actual eyeball that was causing the problem. Luckily, I had a spare, and the air bubble stopped as soon as replaced it.
How does a faulty eyeball cause air bubbles?
@@SavageM you are right doesn't make sense. The most of my friend pool who called me about bubbles in their return jets turn out that they just hand tighten the band clamp which causes leak, you must use wrench. I just asks when did you clean the filter and check it with wrenches. The other is that quick release air, they don't last long plastic, buy metal brass stem cost more but less headache.
Do I turn my pool off ? I can't fix it ?
I fix it It keeps coming back my pool loves bubbles i guess
Do a cracked pipe cause it😮
Are air bubbles harmful to your pool ?
No, but air in your pump will cause cavitation and reduce the life of your pump.
Here is one big no-no for pool users: my daughter decided she did not like the Kreepy Krauly vac inside the pool so she lifted it out of the pool. It sucked air that the pump returned to the pool through the first jet. Suffice it to say that this not only caused cavitation, but also destroyed a $1500 pump.
This happen to me too, luckily I was there when my son did it and I teach him to remove it from the wall connector.
You have a very sensitive pool. 1500 in damage?
Mobile
No
Mo