Aqara U200 Installation in detail Video
HTML-код
- Опубликовано: 25 авг 2024
- This video is by request and shows a detailed installation of the lock on a UK multi-point door. For the setup and review, please see my other video on the U200 retrofit lock.
The U200 is the first retrofit lock ever to support Apple Home Key and is packed with features.
Here is a link to buy the lock in the UK
www.aqara-shop...
Thanks so much for the review I really wanted one of these but couldn’t work out how to fit it to my door! Got it on prime day after seeing your review and saved £50 thank you
@@scubaharley you’re more than welcome and once again, thank you for the amazing kind comment. If you do need any further help then please feel free to message me on my Facebook page which should be listed. It’s AndysReviewsAndSmartHomeTips.
Hi Andy, Great job with the installation video for Aqara U200, it would be good to catch up - I will send you a DM
@@SeanOBrien27 hi, I’ve left you a message and thank you for the great feedback 😊
Thanks for the review!!
Thanks for watching! Hope you have a great day 😊
Thanks a lot man, really helpful
@@junny1075 no problem at all, thank you for the kind words 😊 have a great day!
Awesome stuff 👍🏼
Thank you, it’s much appreciated 😊 have a great day!
@@andysreviewsandsmarthometips - My front door doesn’t have think kind of lock. It have the “night latch” style. I take it this won’t work for me after all?
@@likhan.ghosh. is there anywhere you can message me on my Facebook page and send me a video of how your lock operates and I will be able to tell you for definite
My page is facebook.com/AndysReviewsAndSmartHomeTips
Hi! why did you change the lock at first?
@@aminefahel this was because you need a lock with a safety feature. By this I mean that you can unlock the lock from the outside when a key is inserted on the inside.
Hi Andy Love the video and help for installation. I just had mine installed following your steps. Im currently in a position where some idiot has pressed reset on the number pad and I am locked out. When trying to redo the set up I need the QR code fro the lock on the inside of the lock where I cant reach and my keys cant open the door as there is already a key on the other side where the mechanism is. Any suggestions? thanks
@@diechicken888 hi, how did somebody manage to reset the lock without the fingerprint or passcode of the administrative user? Also it is recommended that you have a lock with a safety feature installed meaning that you should be able to unlock the door from the outside even with a key on the inside. my only suggestion would be that if you have another door, try and get in that way otherwise I am unsure how to help you with this. No one should’ve been able to reset the lock without the admin fingerprint or password though.
Do you really need the emergency function with the keys opening at any time or can it be installed without having it?
@@thegiantdutchman if you do not have the emergency function, you will not be able to unlock the door from the outside. As this is a retrofit lock, the lock must be able to unlock from both sides if anything fails. For example, if for some reason you did not have any charge on the door lock itself and you were outside the house then you would not be able to unlock the door from the outside and get in
What lock did you buy? Also was it 40/40 etc? My door is the same as yours.
@@AdieAdie17 he is a link to the lock I bought, it is on the UK Amazon website. Also, I know it holds up because someone tried to break into my house and the outer part snapped off and they were still trying to get in when the police arrived. amzn.eu/d/02IlJ4jl
Hi Andy, how can I wire my U200 keypad? I'm also using the G4 doorbell? Did you power it using a wall plug or?
@@Tty85 hi there, for this particular installation I used two different adapters for the keypad and the G4 however if you get a power adapter that is 8 to 24 V and a minimum of one amp then you can power both devices from the same plug. You do this by putting. A three way. WAGO connect to on the positive wire and the same on the negative wire. Then you can run two positive wires and two negative wires each to each device if this makes sense. This way you can power both devices from one individual plug. If you need more instruction, get back to me on my Facebook page. facebook.com/AndysReviewsAndSmartHomeTips and I can help further.
@@andysreviewsandsmarthometips My G4 doorbell is wired and gets power from old doorbell. It was an old doorbell, but an electrician put some fast glass fuses and transform from 220V to 12-24V.
@@Tty85 in this case, I would personally recommend contacting the electrician that installed it as I do not feel qualified to advise you on this particular set up. If anything went wrong, I would hate to be the one that gave you the wrong advice. I know that it can be done so that both devices are powered from the same source, however, like I say, I would consult your electrician since it is wired into a main system
@@andysreviewsandsmarthometipsor if you were using an 8v to 24v you could just wire the positive of the keypad to the positive of the G4 and the same with the negatives. Job done!
I don’t think you needed to screw the baseplate to the door, you can secure it to the cylinder using the supplied Allen key
@@paulmwhite my particular cylinder does not quite have the space for this hence why I did it this way, plus I wanted the extra security 😊 hope you have a great day!
Andy I need some help. I’m really struggling.
1st I got a thumb turn cylinder as I’ve a odd cylinder size and couldn’t get a double entry.
Fitted that.
Fitted u200
I’ve now a predicament where only my internal handle engages with the latch and only a key turn either side also operates the latch. Problem being the key turn doesn’t fully retract for the hook bolt and dead bolts. They do move but could do with retracting another 5 to 10mm which seems odd. A push of the handle retracts the bolts properly but as I 1st mentioned I’d be stuck out still in testing because the external handle doesn’t retract the latch because I have a particular spindle…
I so want this to work somehow but I’m borderline boxing it all back up and sending back. I’m losing the will to live. In your video it seems your handle only does a latch and 1 deadbolt?
Hi there Dan. I'm sorry to hear that you are having problems with your lock. I have a few suggestions that may work, however it may be a slightly lengthy process. Would you mind messaging me on messenger? you can do this through my Facebook page facebook.com/AndysReviewsAndSmartHomeTips
This will be the best way to help you. I can also get you to send me a video through this so that I can better understand exactly what is going on.
Hope this helps.
Hope to hear from you soon.
I’m going to change the thumbturn today and switch the spindle in the handle. Let’s see how that goes and il let you know. Thanks for the reply and information
@@DanW121ght no problem at all, let me know how you get on either way. Sorry I didn’t reply earlier. I only just saw your message because I have been extremely busy. Fingers crossed everything goes okay and it starts working for you. If not though, please don’t hesitate to get in contact and I can try and run through on a personal basis, the best course of action to follow.
@@DanW121ght hi there, did you manage to get it working?
@@andysreviewsandsmarthometips Morning Andy, i really appreciate you following me up. Switching the split spindle done the job and im up and running now. That’s the porch door done now to find a suitable mechanism so i can have a 2nd u200 fitted to the inner door. Thinking of switching the old deadbolt out in place of a euro profile mortice or similar. If youve any tips / suggestions would appreciate it.
That's a really rough installation - just mounting the U200 over the existing locking mechanism as it doesn't sit flush with the door 🤷♂
@@willmitchell255 would you suggest another way then please? I’d be happy to try a suggestion if you have one.