Interesting how far this has come. I still remember your earlier videos and I was thinking to myself, "What is he doing?" When it all got together and the saw was the part that moved I was complete surprised.
Really interesting idea to reverse the movement of the wood and the saw : it's impossible to the wood to move, so it's also impossible to have a wobbling kerf and the cut can be only perfectly right. Congratulations you're a woodgenious👌👍🖖
That is an amazing setup! Expensive though, in time and material. I hope it serves you worthwhile. Anyway, maybe you could consider working as a designer at Festool. You have proven to be very innovative these last years.
Outstanding table saw solution. You should have patented it. Based on your videos I would not be surprised to see off-the-shelf products based on your concept. Congratulation for your sense of innovation. Regards from freezing Switzerland
I love how you are always re-thinking how work is done! One nice feature of a "standard" table saw is that the fence can be used to set the dimension of your cut, which means you can do repeatable cuts a little easier. Have you thought of ways to incorporate a ruler or allow repeatable cuts? Cheers!
Крутая задумка и реализация!!! А еще можно в основной стол вмантировать Т-трек перпендикулярно пильному диску, чтобы эту оснастку можно было использовать как паралельный упор для продольного распила...или этот Т-трек устанавливать при помощи бабышек в сущеструющие отверстия...
A sliding miter saw, but in reverse! Whodathunkitt!! Now that I think about it, My miter saw rarely sees any use and I don't yet own a table saw. Maybe a good idea to simply mod the miter saw instead of going to the trouble of using a circular saw to make a table saw. In any case, Wonderful idea, superb implementation!
Cool. It’s tough to make a video of a saw making cuts, right? The point of a good saw is that it makes them fast. But a fast cut means a 20 second video. I think you did a good job stretching it out while also giving tone for the viewer to get that ah-ha I see where I need this.
Your skill level is outstanding in making this. However I am totally confused about its usefulness. I have a sliding table saw, which does all that yours does, but is FAR easier for ripping lengths, unless we have not yet seen an easy way that this is achieved with yours? I thought that you were making a portable version of a Felder type saw, a more rigid version of your systainer saw, which I thought 'wow, how useful', but this, I'm not so sure.... As I said though, blown away by the quality in manufacturing- especially that protractor.
Be nice to incorporate a bit of Festool track splinter guard along the static edge - stop all that chip out. Really like this setup - but I can only afford the one TS55 :-))
Awesome amigo! Been following your builds and it’s great to see it in action. Quick ask, were did you source the Aluminium profile for the fence? Thank you!
Mirock, very nice setup. What is the small fence on the saw side for (that runs parallel to the blade)? It seems to limit the length of cut-off you can have.
do you any issues if fence table is on the right side and sliding table on the left side ? I plan to make such a Meter saw using my TS-75 and any tips is helpful.
I have a Craftsman table saw from 1947 that works very much the same way. Thanks for sharing. Scott
Interesting how far this has come. I still remember your earlier videos and I was thinking to myself, "What is he doing?" When it all got together and the saw was the part that moved I was complete surprised.
Really interesting idea to reverse the movement of the wood and the saw : it's impossible to the wood to move, so it's also impossible to have a wobbling kerf and the cut can be only perfectly right. Congratulations you're a woodgenious👌👍🖖
Exactly. No movement, no play, no injure
I liked the clamp option in this setup.
Your mitre gauge/protractor set up on your saw is superb.
Thank you Ian!
Mistrzostwo Super. Jesteś mistrzem w swoim fachu. 💪💪💪💪💪💪
That is an amazing setup! Expensive though, in time and material. I hope it serves you worthwhile.
Anyway, maybe you could consider working as a designer at Festool. You have proven to be very innovative these last years.
Festool now is attracted with sousage cutting ideas)
That looks amazing. You are such talented craftman.
This is mind blowing. Period. Congratulations!
Outstanding table saw solution. You should have patented it. Based on your videos I would not be surprised to see off-the-shelf products based on your concept. Congratulation for your sense of innovation. Regards from freezing Switzerland
Thanks! I don't mind if someone do so. Let it go to masses
I love how you are always re-thinking how work is done! One nice feature of a "standard" table saw is that the fence can be used to set the dimension of your cut, which means you can do repeatable cuts a little easier. Have you thought of ways to incorporate a ruler or allow repeatable cuts? Cheers!
Крутая задумка и реализация!!! А еще можно в основной стол вмантировать Т-трек перпендикулярно пильному диску, чтобы эту оснастку можно было использовать как паралельный упор для продольного распила...или этот Т-трек устанавливать при помощи бабышек в сущеструющие отверстия...
Wow, you are a superbly talented guy
You are a true design genius...
A sliding miter saw, but in reverse! Whodathunkitt!!
Now that I think about it, My miter saw rarely sees any use and I don't yet own a table saw. Maybe a good idea to simply mod the miter saw instead of going to the trouble of using a circular saw to make a table saw.
In any case, Wonderful idea, superb implementation!
Awesome tool. Wow! You are a genius for sure.
Very creative thinking
excellent job
Cool. It’s tough to make a video of a saw making cuts, right? The point of a good saw is that it makes them fast. But a fast cut means a 20 second video. I think you did a good job stretching it out while also giving tone for the viewer to get that ah-ha I see where I need this.
Really good work. Next level stuff.
This is an amazing idea, love it
Your skill level is outstanding in making this.
However I am totally confused about its usefulness. I have a sliding table saw, which does all that yours does, but is FAR easier for ripping lengths, unless we have not yet seen an easy way that this is achieved with yours?
I thought that you were making a portable version of a Felder type saw, a more rigid version of your systainer saw, which I thought 'wow, how useful', but this, I'm not so sure....
As I said though, blown away by the quality in manufacturing- especially that protractor.
We have a saw with a similar philosophy in metalworking called the Marvel Vertical Band Saw, where the work stays still and the saw is what moves.
I have found Interesting saw
You are a genius
Sweet!!!
Noe how about a guard for the saw blade?
Simply genius!!!
Be nice to incorporate a bit of Festool track splinter guard along the static edge - stop all that chip out. Really like this setup - but I can only afford the one TS55 :-))
Yes, it is planned to do in future
Awesome amigo! Been following your builds and it’s great to see it in action. Quick ask, were did you source the Aluminium profile for the fence? Thank you!
It is usual squared tube 20×20
Mirock, very nice setup. What is the small fence on the saw side for (that runs parallel to the blade)? It seems to limit the length of cut-off you can have.
It can be removed if i want to cut something long
Kickback? Who cares, i'm on the other side! 😁
Now, name me an angle... any!
awesome but it does feel weird to pull blade towards self even though that’s what’s essentially happening on a regular tsaw
do you any issues if fence table is on the right side and sliding table on the left side ? I plan to make such a Meter saw using my TS-75 and any tips is helpful.
There will be one more parallel fence ob right side, bigger and longer. Left one is like additional
Mirock's Toolworks Thanks for the feedback.
Hi, If I want to buy something from you, do you ship it to Germany?
It is great
What is the maximum rip length that you can cut
With slider about 1.15m
Вондерфул каретка, ручку для протяжки замутейшн )
Нужна ручка, за которую тянуть каретку!