Environmental Engineering | Experiment | Pollutant Adsorption with Activated Carbon Geocomposite

Поделиться
HTML-код
  • Опубликовано: 31 янв 2025
  • Here you can see how activated carbon in combination with geotextiles can adsorb pollutants. In this experiment with methylene blue you can guess what active geocomposites with granular activated carbon can achieve in environmental engineering. The textiles give the activated carbon layer mechanical stability and a constant layer thickness. In this way, pollutants already present in the environment can be encapsulated, new pollutant inputs prevented and pollutants removed from liquids and gases.

Комментарии • 29

  • @srinathmandal2185
    @srinathmandal2185 Год назад

    I think the reason for it not turning completely colourless is due to less surface area for adsorption since the solution is poured directly onto the surface, i think if the solution was passed through the charcoal then it might have given better results. Btw the video was really wonderful!

  • @environmental._science-y8l
    @environmental._science-y8l Год назад +2

    Thanks a lot for the demonstration

  • @amendez7
    @amendez7 4 года назад +2

    I wonder if, after a treatment with alumina, activated carbon would be useful to treat laundry wastewaters in order to eliminate surfactants and detergents.

    • @HUESKERGroup
      @HUESKERGroup  3 года назад +2

      Thank you for your question. Our company has not made any tests on this and therefore cannot report any practical experience. Basically, activated alumina (aluminum oxide) is used for the removal of polar, hydrophilic organic substances. Activated carbon is a preferred filter material for the separation of hydrophobic organic compounds. Adsorber resins are also used to remove tensides. Thank you again for your interest. Your HUESKER team.

    • @amendez7
      @amendez7 3 года назад

      @@HUESKERGroup Thanks for the answer!

  • @kaluvictoruko2418
    @kaluvictoruko2418 Год назад +1

    Please what is the name of the apparatus used for the experiment

  • @ahmedshaikh9461
    @ahmedshaikh9461 Год назад +1

    Very good

  • @mslouleta
    @mslouleta 4 года назад +1

    Wow!

  • @amirhosseinghanbari5075
    @amirhosseinghanbari5075 4 года назад

    Thank you very much, how we can regenerate the AC capacity again to absorbed MB?

    • @HUESKERGroup
      @HUESKERGroup  3 года назад +1

      For desorption of methylene blue, the activated carbon can be doused with ethanol. Do not forget to collect the filtrate. If you have any further questions, please do not hesitate to contact us. Your HUESKER team.

    • @amirhosseinghanbari5075
      @amirhosseinghanbari5075 3 года назад

      @@HUESKERGroup thank you do you have any AC for selling?

    • @HUESKERGroup
      @HUESKERGroup  3 года назад

      @@amirhosseinghanbari5075 We can offer you activated carbon in combination with our geotextiles - our active geocomposite Tektoseal Active AC. With this product you can install activated carbon on large areas and with a constant layer thickness, the activated carbon always stays safely in place and absorbs pollutants where they occur. Interesting for you? You can also find more information on our website. We would be pleased to support you in one of your projects. Your HUESKER team.

  • @mayurvarmora7003
    @mayurvarmora7003 Год назад +1

    Nice

  • @robbiecahill9483
    @robbiecahill9483 2 года назад

    Will this method adsorb dye from marked diesel?😅

    • @HUESKERGroup
      @HUESKERGroup  2 года назад

      Thank you for your question. 😉 Diesel will block the surface of activated carbon. As a result, the surface is not available to sorb target compounds. Best regards, your HUESKER-team.

  • @berenicesosamorales4261
    @berenicesosamorales4261 8 месяцев назад

    Hi, could you share me the papper of the medology?

  • @hajarazaman2058
    @hajarazaman2058 4 года назад

    hello, how do we know how many percent GAC binding the component?

    • @HUESKERGroup
      @HUESKERGroup  4 года назад +1

      This depends very much on the inner surface area of activated carbon (AC). The surface are of an AC from coconut shells is higher than from an AC made of wood, for example. When you know the expected concentration of the components, the amount of activated carbon required can be calculated. Greetings from HUESKER Team.

    • @hajarazaman2058
      @hajarazaman2058 4 года назад

      @@HUESKERGroup thank you

  • @subhashitbhuria297
    @subhashitbhuria297 3 года назад

    where can i buy this setup

  • @meharfatmi3322
    @meharfatmi3322 2 года назад

    Is this process works on hg adsorption??

    • @HUESKERGroup
      @HUESKERGroup  2 года назад

      Thank you for your question. 🙂 🤝 The use of impregnated activated carbon makes it possible to adsorb Hg. With a sufficiently long contact time, Hg is thus effectively absorbed. Your HUESKER team.

  • @nanotechnologies9639
    @nanotechnologies9639 3 года назад

    Hello Nice process. We want to buy complete package please let me confirm how we can contact with concern seller.

    • @HUESKERGroup
      @HUESKERGroup  3 года назад

      You are welcome to leave us your contact details here and we will get back to you / your company as soon as possible. Here you will also find the right contact person worldwide: www.huesker.co.uk/company/global-contact/
      Thank you for your message and greetings from Germany. Your HUESKER team.

  • @meharfatmi3322
    @meharfatmi3322 2 года назад

    Amount of methylene blue in 1litre of solution??

    • @HUESKERGroup
      @HUESKERGroup  2 года назад

      Many thanks for your interest and your questions! 🙂 Some drops are enough to color the water and to see the effect.Your HUESKER team

  • @smrutismita4229
    @smrutismita4229 3 года назад

    PLEASE SAY HOW TO MAKE ACTIVATED CARBON FROM COAL B CHEMICAL ACTIVATION