This lock is only rated "klass 3" and it's for scooters and motorcycles, there is klass 4 and klass 5 also which a believe LPL can not pick. Here in Sweden many locks are certified by SBSC.
Luckily there is no way to mass produce the skills required to use the pick on these type locks. It takes so long to get good enough to open these locks and I'd argue that the talent required to get them open in the same speed as LPL is probably only attainable by the 1% of people who take up lock picking.
@@Quick_in_and_out Right. These cores are still quite good for most peoples' purposes, and as long as the lockmakers avoid putting in design flaws that allow people to bypass it, and put them inside of beefy lock bodies, they're well worth owning.
@@Quick_in_and_out Hell looking at how long it took LPL to pick this one even with him noticing things that an amateur would never even think of, I'd say this would be a good deterrent for any average burglar. Judging by the materials used the only viable attack would be a disc cutter and that would make it noisy enough for the lock to still have done its job perfectly.
Roughly two minutes of pick time is impressive when you're talking about someone who is highly skilled and has specialized tools on hand and is operating under ideal conditions.
I finally bought myself a lockpick set off Amazon and have been trying it out on a few padlocks I had laying around. Apparently they're all unpickable.
The "key" to picking any lock is...practice, practice, & practice. Proper tensioning & feeling the feedback of a lock, can only be learned from experience. Keep trying & you'll get it!
John Larson Yeah, I’ve actually been able to open a couple, but not consistently. I’ll pick two or three times in a row then get stuck on it again. And one lock I’ve been able to rake open a few times, but I can’t pick it to save my life.
It really isn't that difficult. The slop in the lock is what really helps these pickers. If everything was good and tight on the tolerances... It would be much much harder to pick. Almost impossible. If every piece was machined within .0001 tolerance you couldn't get it without a key. You have to think... With the slop in the tools, that slop directly connects to the slop in manufacturing. When they use a paper clip to open it... It's not even a lock lol. The disks in this video are stamped brass, if they used machined steel wafers they couldn't get it. Hell, you could laser cut them and have built a better core. i need to invent an un-pickable lock.
I'm German. I got RhinoBarbarians joke. And I get it if someone from another continent (yes, I assumed) mixes up some facts about European countries. So let me borrow a phrase from down under: no worries mate
Yeah and especially given they are anything but cheap, with all these high-quality materials and mechanical complexity... LPL accepts only the finest of them all.
Good luck sourcing an Anchor Las, you can get one from securitysnobs and thats about it as far as I'm aware. They're pretty exclusive, excellent locks, well made and very secure. In the same bracket as Abloy. I'm after the 590-6 CEN6 a mere 225 bucks!👍😀😜
This lock is rated very good. I actually have to use this lock for my outside storage as it is one of the approved locks by my insurance company. Very nice to see it get a good approval.
Tom Herron+ Most of the EU have lock security requirements set by insurance companies. If the lock you want to use isn't on an approved list and rated for the insured risk, they deny your claim. I looked for Mater Lock padlocks on the Amazon UK site and the reviews I read indicate that the only people purchasing Master Padlock are lock sport pickers. The other reviews state, don't purchase to lock up anything you care about,
@@snarkylive It's sad to see people that stupid on the internet. I'd burn that NRA garbage toilet paper propaganda pamphlet if I were you instead of parroting it.
@@KuK137 yeah, people really don't seem to understand that property crime has financial motive. Most burglaries happen when the owner isn't even around... and firearms are some of the most valuable items to steal.
You might want to change the [a] in your title to a [å] seeing as they a separate letters in swedish. Lås = Lock Las = abbreviation for Law of employee protection.
This is the bad boy I have on my unit, I can sleep even better at night after watching this :) 2 minutes for a professional says that's gonna be unlikely your average tea leaf to be able to get through it.
I love how he burnt and unbaked a cake with 6. I applaud LPL for his ability to create an entertaining channel based on lock manipulation which isn't exactly action packed but once you understand it a little more you can be on the edge of your seat watching him pick a lock that employed magnets as an additional security measure. Well done sir.
LPL and Bosnian Bill taught me everything I needed to know to pick the door lol on my hotel room in Amman. Turned out that the hotel gave me the only key to that door, so while they were desperately trying to find a solution l got it open. They were impressed!
Nah; unless you somewhere recorded your intention to commit a crime it shouldn't be admissable in court. I think. I'm not a lawyer. But LegalEagle is; you should check out his RUclips channel.
When you are installing those disks they have a special number and a special pattern. If you look at the little nubb that's showing on all the disks. Btw. This is one of Sweden's most sold anchor locks sold in the world. Best regards a locksmith from Sweden
First thing we're going to do is rotate all the disks clockwise as far as they will go- *Lock opens* And that's it for today. If you like our content, don't forget to subscribe, and as always.... Have a nice day
It's not Anchor Las - It is Anchor LÅS, as many others have pointed out. The one here is class 3, it's available in class 4 and 5 as well, model numbers 590-x
@@lockpickinglawyer The last disc is actually there just to give the key tip a grip on the core, since disc detainer needs at least one 0 cut to work. I work alot with abloy locks, and newer ones also have 11 discs, where the oldest ones actually have only 10, and instead the top one, which nowadays is a spinner, was the 0 cut for the grip on the core, and the bottom of the core, which now holds the extra disc, instead was just a slot for the tip of the key. TL;DR: The 11th disc is just for tension
Cool, you've got an Anchor Las in your collection now. Jammy sod, those things are quite exclusive, hard to source only one place I know that sells them...securitysnobs. Anchor Las is on the same shelf as an Abloy in quality, strength and security. I'd love the Anchor Las 590-6 its their CEN 6 padlock...at $225 dreaming for now. Anyway, well done for picking that lock! 😀👍
So off topic from this video.....I recently watched your review of that Bangood cheap lock picking set. I took your advice and smoothed them out. I work in quality engineering at a huge mega factory. We have nothing but American locks all over the place. Well people lose keys all the time and we have to cut the shackles all the time. Well....I just picked my first lock!!! Your channel is amazing and this will help my company save money! Of course people end up finding their keys eventually so I can swap core between cut locks and missing key but eventually found key locks. lol.
As always, great job. I do have a question: why do banks "drill" out safe deposit box locks when customer loses their key? Why not "pick" the lock by chaps like you? The keys look simple enough and the mechanism can't be that complicated. The locks aren't meant o be physically robust - they're in a controlled environment - so why not just "pick" them? I (we) await your answer.
Not sure about it but what is the point in preserving the integrity of a lock if all keys are lost? Starting from that premise I guess it's usually cheaper to just drill through the lock than paying an expert to actually pick the lock. As you said they're in a controlled environment, it's not as if they were stealing stuff where time and stealth are much more constraining.
That ought to be a good lock. Anchor is a small Swedish producer of high quality, high cost locks. The simpler model without shackle protection is called 830-3 and costs around 90 US$. I have not found any price for 833-3, but it will surely be more expensive. On the other hand, you can expect the lock to last a lifetime and then some.
Do you have any clear bodied practice disk locks? I don’t really understand how they work, would be nice to be able to see inside as you pick/unlock one.
"A bit of a challenge". That's what I heard you say. Well you started picking at 50 seconds and you are done picking at 2 minutes and 52 seconds so approximately 2 minutes to pick and get into whatever was of value. I would have saved myself the lock money and just wrapped a piece of coat hanger wire around a hasp to secure it. It would take you longer to either cut the wire or unwrap it than it did to pick this lock. You are amazing!
Bear in mind, that's two minutes of picking by one of the world's most skilled lockpickers, using a highly specialized custom made tool, under ideal conditions, AFTER he has done research and practice runs. Honestly that's kinda impressive. The average thief would not be able to do this, they'd try to force the lock or just try to break or bypass the door, instead.
I now saw several trays for pinnings, but they all cover the standard core design with two pins, a spring and maybe some master wavers. I'm a bit curious why there are no pinning trays for Disc Detainer locks yet ...
Why have you never made a video explaining locks that you have a really hard time picking... or maybe even CAN'T pick. It seems like you just post videos of locks you've practiced and can pick in a short time. I understand the desire to be seen as like this unstoppable pickmaster... but it'd be informational to know about some types of locks that are especially difficult to pick.
Tkx for you vides I learned the basics of lock picking and now I know how to pick my moms closet where she hide mine Nintendo switch now that I'm grounded 👌👍👍👌👍
What a coincidence, I'm a Swede and I noticed this was uploaded on my birthday, wow! I usually don't bring attention to it if I notice that a video has been uploaded on my birthday, but in this case I couldn't help it x3
I work as a network engineer and was visiting a customer today to solve an issue they were facing. Sitting quietly peering into my terminal, finding how to solve the first half of the problem we had I muttered "I think we just had a nice click out of one..." and everyone around the table looked at me like I spoke words noone could understand. People don't understand problem solving the way it works inside my head these days.
Hey LPL. I tossed this at Bill too. Ive not seen anyone use oscillating tools against locks. Like yeah there are electric picks that are essientially mini oscillating tools, but i mean full size power tool oscillating cutter type things. I think they might be successful against various locks used in various ways.
I'm happy that you took it apart. I know you said "and of course I will take it apart," but we really can't take it for granted anymore. You really don't take apart almost any lock anymore, even the really interesting ones. I can understand why, but it's still not a given.
Picking the lock in less than a minute, still consider it to be a lock he would choose. Bloody hell. I envy your skills, Sir, and I salute you! I have four of these, they cost well over $100 each. A bit unsettling to see that they were so "easy" to pick. :/
![[919] Prison Break! Huge Prison Locks Opened in Seconds](http://i.ytimg.com/vi/dleQ_bcbMJo/mqdefault.jpg)
![[919] Prison Break! Huge Prison Locks Opened in Seconds](/img/tr.png)
![[710] The Naughty Bucket Chronicles - BKS Euro Profile Cylinder Picked and Gutted](http://i.ytimg.com/vi/pjjModsm8yo/mqdefault.jpg)
![[916] Abloy 341 “Enforcer” Padlock Picked and Gutted](http://i.ytimg.com/vi/oxfUmcMzx08/mqdefault.jpg)
![[1184] ERA “Maximum Security” Padlock With Magnetic and Concentric Pins Picked and Gutted](/img/1.gif)
I can see Anchor's advertising now. "Not a bad lock... Probably a lock that I would consider using" - LPL
I mean it's quite high praise. "Not a bad lock... Probably a lock that would consider using" LockPickingLawyer (Expert Lockpicker)
LPL's "Not a bad lock" is roughly equivalent to any other product review getting 8 stars out of 5.
He still doesn't need a key for it...
This lock is only rated "klass 3" and it's for scooters and motorcycles, there is klass 4 and klass 5 also which a believe LPL can not pick. Here in Sweden many locks are certified by SBSC.
I would advertise with that. LPL runs a thieves guild.
“A pick that i would consider using”
Anchor Lås: STONKS!
*stönks*
I'm buying these locks so stonks is right
LPL: Recommends 2 disk detainer locks in a row
Also LPL: Working with Sparrows to mass produce a pick for said locks
It's a conspiracy. Aaaaaaaaaaaah. Where is my tin foil?
Luckily there is no way to mass produce the skills required to use the pick on these type locks. It takes so long to get good enough to open these locks and I'd argue that the talent required to get them open in the same speed as LPL is probably only attainable by the 1% of people who take up lock picking.
@@Quick_in_and_out Right. These cores are still quite good for most peoples' purposes, and as long as the lockmakers avoid putting in design flaws that allow people to bypass it, and put them inside of beefy lock bodies, they're well worth owning.
@@Quick_in_and_out Hell looking at how long it took LPL to pick this one even with him noticing things that an amateur would never even think of, I'd say this would be a good deterrent for any average burglar. Judging by the materials used the only viable attack would be a disc cutter and that would make it noisy enough for the lock to still have done its job perfectly.
@@Quick_in_and_out OCCUPY LOCKPICKING!
Roughly two minutes of pick time is impressive when you're talking about someone who is highly skilled and has specialized tools on hand and is operating under ideal conditions.
@Hell's favorite Salty Masshole what
Absolutely... under non ideal conditions it would take him at least an additional 3 seconds.
Imagine being a lock and hearing "this is the lock picking lawyer" 😔
F
Im gonna get some action with his tools tonight!
Why do i hear boss music?
😳😳😳
Even worse is when you then hear "Let's take this to the garage"
I finally bought myself a lockpick set off Amazon and have been trying it out on a few padlocks I had laying around. Apparently they're all unpickable.
The "key" to picking any lock is...practice, practice, & practice. Proper tensioning & feeling the feedback of a lock, can only be learned from experience. Keep trying & you'll get it!
John Larson Yeah, I’ve actually been able to open a couple, but not consistently. I’ll pick two or three times in a row then get stuck on it again. And one lock I’ve been able to rake open a few times, but I can’t pick it to save my life.
Buy some masterlocks
Spiff; You are not cut out for it, also yourt destiny lies elsewhere, you mut become a chocolatier, or a rodeo.
That my friend, was funny.
A lock that I would consider using. Must be damn good. This Lock is now one of the few chosen ones.
If it takes LPL this long theres few people who can open it at all. And it looks quite sturdy.
It is worthy
And no BS about being unpickable, just a good lock
2 minutes? Thats a solid lock!
2 minutes by (of) the most experienced disc detainer picker(s) in the world with the most specialized tool in the world.
@@tomhejda6450 Yeah! I said the same thing.
LpL not your average lock picker I would wager that there are only a handful people that could pick that lock that fast
WOW LOCK VERDICT
It really isn't that difficult. The slop in the lock is what really helps these pickers. If everything was good and tight on the tolerances... It would be much much harder to pick. Almost impossible. If every piece was machined within .0001 tolerance you couldn't get it without a key. You have to think... With the slop in the tools, that slop directly connects to the slop in manufacturing. When they use a paper clip to open it... It's not even a lock lol. The disks in this video are stamped brass, if they used machined steel wafers they couldn't get it. Hell, you could laser cut them and have built a better core. i need to invent an un-pickable lock.
"This Swedish lock was sent to me by Hans Christian in German."
Fitting since unpickable locks are a fairy tale.
Wrong countries.
To complement the above, if you were thinking of Hans Christian Andersen, he was Danish. The Brothers Grimm were German.
I'm German. I got RhinoBarbarians joke.
And I get it if someone from another continent (yes, I assumed) mixes up some facts about European countries.
So let me borrow a phrase from down under: no worries mate
@@al1rednam
Okay, the joke was about the guy's name, not where he was from. I was fully aware HCA was Danish and that the Brothers Grimm were German.
First Swedish lock I see him pick. First lock I hear him recommend. Gives a sense of pride. :)
Hehehe, mycket riktigt. Våra saker äro av kvalité!
@@moseskfrost "äro", dog av skratt. Kung é du
@@fisfisarenskanal Ha-ha, tackar. Ja, jag använder fortfarande våra arkaiska verbformer, tro det eller ej. ;-)
Rösta SD
Man another lock he would use! Guess I'm going broke this week...
Yeah and especially given they are anything but cheap, with all these high-quality materials and mechanical complexity... LPL accepts only the finest of them all.
Good luck sourcing an Anchor Las, you can get one from securitysnobs and thats about it as far as I'm aware. They're pretty exclusive, excellent locks, well made and very secure. In the same bracket as Abloy. I'm after the 590-6 CEN6 a mere 225 bucks!👍😀😜
It will be worth it.
@@claudiodiaz9752 depends what you are locking up and where it is, it may well be worth it, just as much as it could be not at all worth it.
Anchor Las Grade 4, 60mm x 28mm Shackle Hardened Steel Shouldered Padlock (833-3 B28) £95.57 INC VAT
"Disk detainer...10 disks...each with false gates..."
Me: good lord that sounds completely impossible
LPL 2 mins later:
"Looks like I was wrong, looks like there are 11 disks... "
Also LPL: "One lock I'd consider using"
@@averagesongcontestan So the 11th disc just surrendered. :)
"*Disc*"
TheNoobPolice no, disk is correct
I started sweating when LPL took more than 1 minute to pick the lock
I didn't start sweating..... LPL's voice is just so calming!
Is there anyone else here who has no idea how to pick a lock but is just fascinated by the concept and loves hearing him explain it? Yeah, me too
I'm just here for the comments. :D
As a former locksmith I am in awe of your picking skills. You´re a beast! :)
A rare nod of approval from LPL.
LPL, the only man alive who is able to pick 11 disks instead of 10 without noticing the extra 1.
Honestly amazing how long it took , this is a solid contender for the best in its range.
This lock is rated very good. I actually have to use this lock for my outside storage as it is one of the approved locks by my insurance company. Very nice to see it get a good approval.
"This is a lock I would bother find the key instead of picking every day".
So nice being a Swede, seeing how good the lock made me a teensy bit proud
Europe gets all the cool locks. We’ve got Master.
Mastersux
Tom Herron+
Most of the EU have lock security requirements set by insurance companies. If the lock you want to use isn't on an approved list and rated for the insured risk, they deny your claim.
I looked for Mater Lock padlocks on the Amazon UK site and the reviews I read indicate that the only people purchasing Master Padlock are lock sport pickers. The other reviews state, don't purchase to lock up anything you care about,
European supermarkets and hardware stores are filled with junk locks. Trust me there are a lot very bad (and cheap) locks.
@@snarkylive It's sad to see people that stupid on the internet. I'd burn that NRA garbage toilet paper propaganda pamphlet if I were you instead of parroting it.
@@KuK137 yeah, people really don't seem to understand that property crime has financial motive. Most burglaries happen when the owner isn't even around... and firearms are some of the most valuable items to steal.
Thank you for sharing your skills I learned so much from you and Bosnian bill in the past year...
I'm very appreciative
Its a pleasure to watch your finesse and gentle dexterity.
"I'm sure that's an anti-pick design, but it didn't seem to affect me much..."
Nice clear fingerprint on that lock body at the end. :)
Kudos to the contributor! ‘a lock I would consider using myself’ - must have a smile like a Cheshire Cat 🐱
Always enjoy watching your work. Thanks again.
You might want to change the [a] in your title to a [å] seeing as they a separate letters in swedish.
Lås = Lock
Las = abbreviation for Law of employee protection.
How do you do that... cicle-a thing?
GreatgoatonFire
I dont Think anyone cares
@@sonarbuge7958 mean
@@sonarbuge7958 Seeing as I've gotten 83 upboats I wouldn't bet on that.
Well he is the Lock Pick [Lawyer]
"That's some sort of anti pick design"
*AFTER PICKING IT*
"I guess they tried to stop me, I just didn't notice"
That half moon is just the easiest way for the key to grab and rotate the discs. All the trickery is on the outside of the discs.
This is the bad boy I have on my unit, I can sleep even better at night after watching this :) 2 minutes for a professional says that's gonna be unlikely your average tea leaf to be able to get through it.
I love how he burnt and unbaked a cake with 6.
I applaud LPL for his ability to create an entertaining channel based on lock manipulation which isn't exactly action packed but once you understand it a little more you can be on the edge of your seat watching him pick a lock that employed magnets as an additional security measure. Well done sir.
If I’m ever a suspect for a robbery, my youtube history will surely put me behind bars. Well at least i have some knowledge on how to pick my way out
LPL and Bosnian Bill taught me everything I needed to know to pick the door lol on my hotel room in Amman. Turned out that the hotel gave me the only key to that door, so while they were desperately trying to find a solution l got it open.
They were impressed!
Nah; unless you somewhere recorded your intention to commit a crime it shouldn't be admissable in court. I think. I'm not a lawyer.
But LegalEagle is; you should check out his RUclips channel.
Wow! you can pick bars!?
And here, we see the lion, opening up its prey after a successful kill.
Oh dear god, it's horrifying
When you are installing those disks they have a special number and a special pattern. If you look at the little nubb that's showing on all the disks.
Btw. This is one of Sweden's most sold anchor locks sold in the world.
Best regards a locksmith from Sweden
I love these videos, so interesting. So much so that I've ordered a noob kit to see if it's a hobby for me. Thanks LPL
Svensk kvalitet!
Absolut!
Stämmer!
Man blir stolt!! 💪🇸🇪
För Sverige i tiden!
Bra skit
that tool these guys have made likely has the industry sweating a little bit.
"It's a tricky pick" "I'd considert using it"
Damn, very high praise!
It is so much fun watching these videos. Just keeping honest people honest.
Middle of the night: *Little click outta 1*
Me: Yo did you hear something?
*Nice click outta 5*
Me: Welp
Bosnian Bill, keep those guns ready, the lock is open!
What does "welp" mean? I see it a lot recently.
@@martinhodge921 a sign of resignation
Lmao
lol funny!😜
6 minute LPL video and YOU KNOW something has gone terribly right for the lock maker.
Seeing you use the tool was very satisfying, I really enjoyed this one. :D
🎶Non-single lockpicking lawyer🎶 Love the videos.
Two endorsements in a row?!? You feeling ok LPL?
I had a nightmare, just me in front of my door and hearing the words on the other side: "Nothing on one, two is binding....
Why try to steal credit from the reddit post?
Wow, that was an impressively quick pick, also beautifully made tool
I just discovered this channel yesterday and I can't stop watching this videos. Someone please help me
You're ... locked in! Oh, is that my coat?
(And this guy's a lawyer, don't even think of the consequences of leaving :)
LPL, can you show me how to pick my way into her heart?
Antony A.V Did you start by turning all her discs as far clockwise as they will go?
@@RiggidyNick 🤣🤣🤣 Saw that coming but still LMAO! 😂
you don't need to pick it. the key is on the front of your debit card.
@Hyperbeeno , Was on Valentines day.
Use top of the key way tension
First thing we're going to do is rotate all the disks clockwise as far as they will go-
*Lock opens*
And that's it for today. If you like our content, don't forget to subscribe, and as always....
Have a nice day
Yours faithfully, Master
That'll be a fun April 1 joke for someone to send him as a challenge lock: High end disc detainer with all 0 discs.
and ..... you left your thumbprint clearly on that lock for the whole world to see. good job.
I like how the shade of your skin acts like the heat map of the pressure you're putting on the lock and pick, finger nails tell a lot too
For 1000 videos you should unlock an unpickable lock
He has done plenty of unpickable locks, and shown a few true unpickable locks and shown why they are impossible to pick in the gutting
But is there such a thing though?
@@demonsrun3281 care to link to the true unpickable locks ?
ruclips.net/video/qV8QKZNFxLw/видео.html
@Candyman video 636
A lock that even LPL is struggling with?
*I'll take your entire stock!*
I like your voice. Half the reason I watch these
Ask and ye shall receive. Sweet this is just what I wanted to see. German lock. lots of discs and false gates. Excellent. I am entertained sir.
It's not Anchor Las - It is Anchor LÅS, as many others have pointed out. The one here is class 3, it's available in class 4 and 5 as well, model numbers 590-x
*_confused_* 11 discs? LSL picked 10 - so the 11th recognized it had no chance and surrendered?
Gerd Kah 😂😂😂 It was a 0 cut... when I rotated all the discs in the beginning, I set it.
@@lockpickinglawyer The last disc is actually there just to give the key tip a grip on the core, since disc detainer needs at least one 0 cut to work.
I work alot with abloy locks, and newer ones also have 11 discs, where the oldest ones actually have only 10, and instead the top one, which nowadays is a spinner, was the 0 cut for the grip on the core, and the bottom of the core, which now holds the extra disc, instead was just a slot for the tip of the key.
TL;DR: The 11th disc is just for tension
Cool, you've got an Anchor Las in your collection now. Jammy sod, those things are quite exclusive, hard to source only one place I know that sells them...securitysnobs. Anchor Las is on the same shelf as an Abloy in quality, strength and security. I'd love the Anchor Las 590-6 its their CEN 6 padlock...at $225 dreaming for now. Anyway, well done for picking that lock! 😀👍
So off topic from this video.....I recently watched your review of that Bangood cheap lock picking set. I took your advice and smoothed them out. I work in quality engineering at a huge mega factory. We have nothing but American locks all over the place. Well people lose keys all the time and we have to cut the shackles all the time. Well....I just picked my first lock!!! Your channel is amazing and this will help my company save money! Of course people end up finding their keys eventually so I can swap core between cut locks and missing key but eventually found key locks. lol.
You should try 590-6 thats their klass 5 with extremely high security this is a klass 3
As always, great job. I do have a question: why do banks "drill" out safe deposit box locks when customer loses their key? Why not "pick" the lock by chaps like you? The keys look simple enough and the mechanism can't be that complicated. The locks aren't meant o be physically robust - they're in a controlled environment - so why not just "pick" them? I (we) await your answer.
Most likely cheaper to just drill it out. The lock will have to be replaced anyhow.
Good question
Can't have someone on the outside who know how to open the safes? They might teach others?
Probably saves time to keep a drill on hand, and drill it quickly.
Not sure about it but what is the point in preserving the integrity of a lock if all keys are lost? Starting from that premise I guess it's usually cheaper to just drill through the lock than paying an expert to actually pick the lock. As you said they're in a controlled environment, it's not as if they were stealing stuff where time and stealth are much more constraining.
That ought to be a good lock. Anchor is a small Swedish producer of high quality, high cost locks. The simpler model without shackle protection is called 830-3 and costs around 90 US$. I have not found any price for 833-3, but it will surely be more expensive. On the other hand, you can expect the lock to last a lifetime and then some.
I picked my 833 up for £80 it was up for £100 But my haggling skills surpass my picking skills lol
Do you have any clear bodied practice disk locks? I don’t really understand how they work, would be nice to be able to see inside as you pick/unlock one.
There are RUclipss on them, but very simple locks even a beginner can pop.
Banggood have cheap clear locks of all kinds.
Are you also able to pick Abloy protec2 core? Want to see that :)
Do you need to find out how to pick it for a job?
When I was in Russia, I noted all the residents in the provincial areas, have Swiss locks. Love to see you pick a Swiss lock, thanks!
Oh no you didn't 😆 Swedish != Swiss
Interesting pick, never saw u use this much strategy and explain it so detailed!
*Villagers in Minecraft should use this*
to keep themselves safe from a Random Swedish guy kidnapping them using a boat
XD
AnderZEL does not kidnap. He cajoles.
Go figure that the Swedish lock needs an Alan key for disassembly.
Why? Its an IKEA-key.
we like alankeys
"A bit of a challenge". That's what I heard you say. Well you started picking at 50 seconds and you are done picking at 2 minutes and 52 seconds so approximately 2 minutes to pick and get into whatever was of value. I would have saved myself the lock money and just wrapped a piece of coat hanger wire around a hasp to secure it. It would take you longer to either cut the wire or unwrap it than it did to pick this lock. You are amazing!
Bear in mind, that's two minutes of picking by one of the world's most skilled lockpickers, using a highly specialized custom made tool, under ideal conditions, AFTER he has done research and practice runs.
Honestly that's kinda impressive. The average thief would not be able to do this, they'd try to force the lock or just try to break or bypass the door, instead.
This channel is a true triumph of the human spirit. Yes, LPL, you may quote me on that.
4:10 "Not sure why there was the half-moon shape, because I DON'T GIVE A FUUUUUUUUUUUUUUUUUUUUUUUUUUU**!!"
Pretty sure the half moon is to make it easier to insert a key when the discs are out of place. Proof that the LPL never uses keys :D
Imagine beeing his wife and hearing: this is the lock picking lawyer...
She must be a very lucky woman...
Finally some good LPL recommends for being a good padlock, congrats to the maker
Always loved your gutting videos!
What is the tray for gutting locks called?
Pinning tray iirc
Pinning tray
Thanks!
Here's a couple to look at if you're interested ;-)
www.sparrowslockpicks.ca/product_p/new4.htm
www.sparrowslockpicks.ca/product_p/sparrowsmat.htm
I now saw several trays for pinnings, but they all cover the standard core design with two pins, a spring and maybe some master wavers.
I'm a bit curious why there are no pinning trays for Disc Detainer locks yet ...
Lås means lock in Swedish, so the text on the lock says "Anchor Lock"
Another hungarian in sweden :D
Riiight mister Blond? :)
@@vibraloop indeed :)
Whew what is it about this guy's voice that is so relaxing. Sheesh if it wasn't for ads I'd sleep to these.
These locks really have special picks . Wow!!!!!
"I am anticipating a challenge" *looks at video length ( I disagree )
"I'm anticipating a bit of a challenge"
2 minutes later
Open
Just got the notification, and already 35,000 views.
LPL is an Icon!
"it didn't seem to affect me very much" totes. can't stop laughing
A video that's longer than 2 min... Wait a minute... What have you done with the real LPL?!
Sorry im new here but can you explain what you mean by that thanks
@@Musawick Given how fast he picks most consumer grade locks, above 2 minutes means this core is way above average in terms of pick resistance.
@@johnathanmcdoe thanks
Why have you never made a video explaining locks that you have a really hard time picking... or maybe even CAN'T pick. It seems like you just post videos of locks you've practiced and can pick in a short time. I understand the desire to be seen as like this unstoppable pickmaster... but it'd be informational to know about some types of locks that are especially difficult to pick.
ruclips.net/video/qV8QKZNFxLw/видео.html
Theres others out there, but I dont care enough to search.
Tkx for you vides I learned the basics of lock picking and now I know how to pick my moms closet where she hide mine Nintendo switch now that I'm grounded 👌👍👍👌👍
What a coincidence, I'm a Swede and I noticed this was uploaded on my birthday, wow! I usually don't bring attention to it if I notice that a video has been uploaded on my birthday, but in this case I couldn't help it x3
Greetings from Sweden 🇸🇪🇸🇪🇸🇪
Thanks for the vid :) greetings from Sweden .
Excellent pronunciation of lås :)
"I'm anticipating a bit of a challenge." Picks lock in just over two minutes. Dude is scary good at this.
That picking device is the 😈
LPL I'm not sure if it's just me but I think showing the mechanism working with the key a couple times before you pick is weirdly satisfying
I work as a network engineer and was visiting a customer today to solve an issue they were facing. Sitting quietly peering into my terminal, finding how to solve the first half of the problem we had I muttered "I think we just had a nice click out of one..." and everyone around the table looked at me like I spoke words noone could understand. People don't understand problem solving the way it works inside my head these days.
That is one beautiful tool!
Hey LPL. I tossed this at Bill too. Ive not seen anyone use oscillating tools against locks. Like yeah there are electric picks that are essientially mini oscillating tools, but i mean full size power tool oscillating cutter type things. I think they might be successful against various locks used in various ways.
He sounds like my dentist. "10 is binding.. 2 feels loose"
Nice picking ! Well demonstrated.
I'm happy that you took it apart. I know you said "and of course I will take it apart," but we really can't take it for granted anymore. You really don't take apart almost any lock anymore, even the really interesting ones. I can understand why, but it's still not a given.
Picking the lock in less than a minute, still consider it to be a lock he would choose. Bloody hell.
I envy your skills, Sir, and I salute you!
I have four of these, they cost well over $100 each. A bit unsettling to see that they were so "easy" to pick. :/