What other vehicles would you like to see on our "What Wheels Fit" series?! Drop a comment below and don't forget to check out the largest online fitment gallery at bit.ly/2lEheYq
As a S2000 owner, seeing stanced S2000s make me very sad. All that engineering and precision, and you dump it :'( Yes yes it's your car you do what you want but maybe take it to a track day first and decide if it's worth it to give up all that focus and engineering.
Stanced is completely STUPID and FUGLY ... I got 2 co-workers (millennials) that have their cars like that and drive down the road with their tires IN at almost a 45 deg angle and they think it looks good
I think the definition of "fit" should be clarified here. To me, absurd camber, fender rolling, and/or rubbing means wheels don't fit. (Unfortunately, too many S2000s suffer from this... and often compromised handling). The best, slightly aggressive fitting wheels, relative to stock, for the S2000 are staggered Volk TE37s in 17x9 +65 - 17x7.5 +48 and CE28s in 17x9 +63 - 17x7.5 +50. There are other brands with similar enough sizes but those two are ideal.
you made a video about fitment but literally didnt add ONE car that fit the wheels without any modification..... change the title to "Honda S2000 | What Wheels CAN Fit"
It would be nice if we could also get a category of functional/performance fitment, i.e. what are autocross and trackday guys running on this car? Thinking about buying one. Thanks :)
Does anyone have any info or pics on how 17x9 +22 would look on an S2k? I have TE37sl’s from my previous car in that spec and am wondering if I could put them on my s2k without it looking to ridiculous
Pretty sure they'd stick out like mad unless you add way too much negative camber. For that offset, you may even need to get wider fenders, so it's probably better to sell those rims for some with a higher offset 👍
Was hoping for wheels that clear the AP Racing front brake kit with a 255 square setup, and can take *at least* 1.5 Gs in a tight corner without rubbing. Last time I ran Maryhill Loops Road on Hoosier A7 tires, I had momentary Gs of 3+ (video on my channel). Since that road is on a cliff and has no guard rails, I don't want to risk cutting into the sidewall under high loads.
Derek GA Hi, I’ve a chance of a really nice set of 18s to run on my S2000 stock body, I’m not sure if they’ll run smooth or not so any advice would be great, the wheel size is 215/35/18. 8.5 et 30
Need camber specs added for anytime you talk wheel specs concerning what fits etc. And lots of folks running 10 & 11 inch wide but running 215 and 225 width tires? Just a lot of stancy setups. Can we get a more track oriented S2000 setup video? Maybe another video with available after marked fenders/over fenders too.
Yes the VOLK setup with 255 will run perfect if you are not to slammed u need to roll your rears or you will rub a bit of the fender lining at full lock
Yes, I've heard of/seen lots of people with 17×9 at the front and rear, with a sensible alignment and ride height. However, I'm not so sure about offset- both would need to be at least +50
Can you guys recommend a fitment for work meister s13p for an ap1? Wheels specs and tires? I want to eventually take it track and don’t want stance tucked. Flush would be ideal, but if that’s not good for track then what’s best?
Have a look here, they have a good guide on what sizes+offsets fit at the front and rear s2000.club/OM/Wheel%20Fitment%20Guide.pdf However, you'd need to check about brake clearance.
When I get back to the states I’ll make some money robbing and killing people with stanced S2ks. That’s like adopting a child and beating it in my eyes.
I have SSR GTV-02 18”-8.5 ET 48. Can anyone help me find the right size tires. I don’t want to have it stretched or cambered. I want it flush and have all the rubbers on the road. The S2000 is stock height. Maybe in the future I might get some BC coil overs with swift springs. Thank you for the help!!!
Check out our gallery! Each gallery add will give you fitment specs and wheels specs so you’ll see what you can run without rolling your fenders! -> www.fitmentindustries.com/search-wheel-offset-gallery
Super clean wheel! Definitely don't blame you! Check those BLQ's out on our site! www.fitmentindustries.com/store/wheels?sort=popular&brand=Rotiform&wmodel=BLQ Shoot us an email if you have any questions! shop@fitmentindustries.com
I dont know what and why its being put out. If it rubs, if you need to roll part of the body, if you need to remove part of the body, it doesn't fit. And if you're making it fit, its probably not safe. The car was specifically made to handle like an f1 car and be fast doing it, and all those modifications made it the exact opposite.
I'm sorry but this video failed... You guys didn't even bother adding one recommendation that wasn't a pain in the ass. Just such a mess. The 350z video was good because it gave a variety of options.
nope ive done the math . you cac stack a 275 on a 9.5in rim [forgot the other number. 30 probably maybe we should go old school 15in rims and fat tires
Regardless of your setup, theres always going to be haters. Do it for yourself not others. 08 Apexblue S2KCR AC/RADIO Contential premium contacts 6 On 22" 255 40R ✌
17" to 20" is absurd to say they will fit... There is no way you get 20" to fit without some nasty pencil tyres, a destroyed/butchered fender/liner and stupid camber.
What other vehicles would you like to see on our "What Wheels Fit" series?! Drop a comment below and don't forget to check out the largest online fitment gallery at bit.ly/2lEheYq
pls do miata as i want to see some options for my own car
hey , what’s the last number stand for ??
Fitment Industries Garage what tires do I buy for 18”-8.5 offset 48?? Front and rear of the S2000
lonnie tran offset
As a S2000 owner, seeing stanced S2000s make me very sad. All that engineering and precision, and you dump it :'(
Yes yes it's your car you do what you want but maybe take it to a track day first and decide if it's worth it to give up all that focus and engineering.
Stanced is completely STUPID and FUGLY ... I got 2 co-workers (millennials) that have their cars like that and drive down the road with their tires IN at almost a 45 deg angle and they think it looks good
@@ACommenterOnRUclips this millennial hates stanced cars
You Tube Get over yourself boomer
Fellow s2k owner here. Performance is life
@@ACommenterOnRUclips I'm a gen Z and I hate it but damn you sound like a boomer lmao
Please don't ghetto your S2000; it's a classy car that deserves better.
Amen
I think the definition of "fit" should be clarified here. To me, absurd camber, fender rolling, and/or rubbing means wheels don't fit. (Unfortunately, too many S2000s suffer from this... and often compromised handling). The best, slightly aggressive fitting wheels, relative to stock, for the S2000 are staggered Volk TE37s in 17x9 +65 - 17x7.5 +48 and CE28s in 17x9 +63 - 17x7.5 +50. There are other brands with similar enough sizes but those two are ideal.
William Bellis III definitely not my style either but if the car drives then technically they fit.
By your recommendation. Tires should be 225/255 front/rear for the same diameter? Or 215/255 just like stock.
Mugen gp and mf10 wheels were designed specifically for this car.
@William, can i throw either of these on a stock s2k? I don't want to mod suspension or anything like that. Thanks!!
@@Jeff-fc4by The two sizes I mentioned in my original post? Yes, you can.
Can we get a recommendation on what wheels to get without rolling fenders at all?
+55 and higher offsets on a 7-8.5" wheel
Exactly what princess said. It’s gonna be expensive to find the s2k offset but if you don’t wanna touch fenders then go for it
you made a video about fitment but literally didnt add ONE car that fit the wheels without any modification..... change the title to "Honda S2000 | What Wheels CAN Fit"
It would be nice if we could also get a category of functional/performance fitment, i.e. what are autocross and trackday guys running on this car? Thinking about buying one. Thanks :)
For sure, all this fitments are for kids that like ugly cars.
3:43 looks like a freaking broken car. Dont understand. Whats wrong with the camber
Need help, can’t decide between Kansei KNP Textured Bronze or Konig Ampliforms for my 03 S2000. Thanks for any input!
Does anyone have any info or pics on how 17x9 +22 would look on an S2k? I have TE37sl’s from my previous car in that spec and am wondering if I could put them on my s2k without it looking to ridiculous
Pretty sure they'd stick out like mad unless you add way too much negative camber. For that offset, you may even need to get wider fenders, so it's probably better to sell those rims for some with a higher offset 👍
Running different sized wheels front and rear what do people use as a spare?
@robert wheeler lol do not ever put 2 dif size rims on same axle
Was hoping for wheels that clear the AP Racing front brake kit with a 255 square setup, and can take *at least* 1.5 Gs in a tight corner without rubbing. Last time I ran Maryhill Loops Road on Hoosier A7 tires, I had momentary Gs of 3+ (video on my channel). Since that road is on a cliff and has no guard rails, I don't want to risk cutting into the sidewall under high loads.
Derek GA
Hi, I’ve a chance of a really nice set of 18s to run on my S2000 stock body, I’m not sure if they’ll run smooth or not so any advice would be great, the wheel size is
215/35/18. 8.5 et 30
Just what I was looking for, thank you!!!!
Need camber specs added for anytime you talk wheel specs concerning what fits etc.
And lots of folks running 10 & 11 inch wide but running 215 and 225 width tires? Just a lot of stancy setups. Can we get a more track oriented S2000 setup video? Maybe another video with available after marked fenders/over fenders too.
Ayyye that's my boy at 3:30 liiiit
Can you text or show or what brands rim and tire for high performance for q50 please thank you
OEMSTOCK👍🏽
What if I have willwood 6 piston brakes in the front I want my rims flush and I’m having problems finding wheels that clear them
I wish Rotiform made aerodisc las-r in 17-18" would look so sick on a s2000
17" x9 +61 square should be fine right?
Yes the VOLK setup with 255 will run perfect if you are not to slammed u need to roll your rears or you will rub a bit of the fender lining at full lock
what work wheels with 5 spokes will go well with s2k ?
Kansei's!
rays gramlights
Can you do an all square set up?
Yes, I've heard of/seen lots of people with 17×9 at the front and rear, with a sensible alignment and ride height. However, I'm not so sure about offset- both would need to be at least +50
Can you guys recommend a fitment for work meister s13p for an ap1? Wheels specs and tires? I want to eventually take it track and don’t want stance tucked. Flush would be ideal, but if that’s not good for track then what’s best?
Have a look here, they have a good guide on what sizes+offsets fit at the front and rear s2000.club/OM/Wheel%20Fitment%20Guide.pdf
However, you'd need to check about brake clearance.
So many ruined S2000's
Horrendous
YEP ... damn millennials ...
When I get back to the states I’ll make some money robbing and killing people with stanced S2ks. That’s like adopting a child and beating it in my eyes.
+58 and higher for me
Evo 8/9 next?
I have SSR GTV-02 18”-8.5 ET 48. Can anyone help me find the right size tires. I don’t want to have it stretched or cambered. I want it flush and have all the rubbers on the road. The S2000 is stock height. Maybe in the future I might get some BC coil overs with swift springs. Thank you for the help!!!
you need minimum 245 Width tires for no stretch on 8.5 rims
Yeah, even 235/45 might look a *little* stretched. 245 is a safe bet
Man them new work deep Vsxv 20”/ are nice I wanted to run em but yk 20 ain’t happening
Forgot about the evasive specs. The perfect flush for stock fenders
The S2000 is now a collectible classic - if you want it to rapidly climb in value - leave it stock.
Okay so what can I run without needing to roll my fenders ?
Check out our gallery! Each gallery add will give you fitment specs and wheels specs so you’ll see what you can run without rolling your fenders! -> www.fitmentindustries.com/search-wheel-offset-gallery
This video is sponsored by stance nation
Hyundai GT Sport?
It’s so new and niche and I still need some info
Looking for some Rotiform BLQs
Super clean wheel! Definitely don't blame you! Check those BLQ's out on our site! www.fitmentindustries.com/store/wheels?sort=popular&brand=Rotiform&wmodel=BLQ Shoot us an email if you have any questions! shop@fitmentindustries.com
I dont know what and why its being put out. If it rubs, if you need to roll part of the body, if you need to remove part of the body, it doesn't fit. And if you're making it fit, its probably not safe. The car was specifically made to handle like an f1 car and be fast doing it, and all those modifications made it the exact opposite.
I'm sorry but this video failed... You guys didn't even bother adding one recommendation that wasn't a pain in the ass. Just such a mess. The 350z video was good because it gave a variety of options.
The fenders are pulled on every single example you showed.
I came to see the car thats on the thumbnail and turns out it wasn’t even in the video
s2000 or civic type r cant make my mind up so let talk about it......?
Your high if you think a fwd civic is better than an s2k
E46 coupe pretty please 🙏🏽
how many times do I need to ask...
MIATAAAAAAAA PLEASE
honestly though
please do the miata
As an S2 owner for 15 years; why you lower the car like that, what are you 12 years old. ffs
They are called MILLENNIALS ....
@@ACommenterOnRUclips I'm a Millenial and I would never dump my car like that
@@denneeee you are in the 1% of millennials that doesnt do stupid shit like this.
I bet their pants are dragging just like their cars
As an s2000 owner I can confirm that "what fits" is very limited and I mean very limited.
nope ive done the math . you cac stack a 275 on a 9.5in rim [forgot the other number. 30 probably
maybe we should go old school 15in rims and fat tires
Nobody puts 20's on an S2000, you spoon.
Regardless of your setup, theres always going to be haters. Do it for yourself not others.
08 Apexblue S2KCR AC/RADIO
Contential premium contacts 6
On 22" 255 40R ✌
The stanced look is just about as dumb of a look for this car as you can get.
stance out a roller, not a car meant to be driven hard.
Had to stop watching @3:46 🤢🤮
yea, I threw up a bit as well. What a shame.
I got 2 co-workers (millennials) with the SAME setup. FUGLY ... !!
17" to 20" is absurd to say they will fit... There is no way you get 20" to fit without some nasty pencil tyres, a destroyed/butchered fender/liner and stupid camber.
If you have to roll a fender, STOP!
boomers mad in comment section
Millennials are so STUPID that they don't even know the proper name for the generation that they are TRYING to make fun of.
Y'all gonna do S2000 but no NA/NB Miata fitment guides..
I don't know if I can forgive this.
Right???
Miata Owners are just people that wish they had a S2000:) lol
who give a hook about miata.
This car came out during gen z , millenials are just mad they didn’t have this car in the 80’s/90’s