Yes it does sound better. I have ridden both the Honda 1300cc and the 2018 Harley Softail 107. Stock 2018 Softail Harley = soft Japanese sound, stock Honda Fury = beefy Harley sound.
The failure rate after 4 years with a Honda motorcycle is 12% as compared to a Harley Davidson which is 26% and this is research that I did a little while ago. Also love the stock exhaust.
I have a link in my other fury video for the intake. I bought it on Amazon and used the Kuryakyn Velacipitor intakes adapter. Mirrors were Amazon too though they don't sell them anymore.
Did the holes in the bath oils of the original exhaust make a big difference at all and sound wise and accelerating wise and give it a little bit more throaty sound
it depends on the extent of the exhaust and how much more free flowing it is... with the high flow air filter and extremely free flowing exhaust, yeah a tune would be needed. with just the 3 inch slip ons or drilled factory exhaust, you could get by without a tuner. As a general rule of thumb, if you don't notice a performance decrease or idle roughness or anything like that, then you don't need a tuner.
The material I drilled out was more of a dust than chunks. I did take a magnetic wand up the holes at first but not much came out. When you start the bike the exhaust pressure will push out the rest.
Gravestarr Customs will make anything you want. I emailed him a description of what I wanted and he drew it out. We emailed back and forth a couple times to change/add some things. $35 and a week later it was in my mailbox. gravesj44.m.webs.com
![BAK Jay - Find Out (For Your Love) [Official Music Video]](http://i.ytimg.com/vi/10FJO_XBCvY/mqdefault.jpg)
those ground pounders sound bad ass
The stock exhaust sounds better than the new Harleys.
Yes it does sound better. I have ridden both the Honda 1300cc and the 2018 Harley Softail 107. Stock 2018 Softail Harley = soft Japanese sound, stock Honda Fury = beefy Harley sound.
Or at least as good.
Sound way more reliable 😉
The failure rate after 4 years with a Honda motorcycle is 12% as compared to a Harley Davidson which is 26% and this is research that I did a little while ago. Also love the stock exhaust.
I burned my leg so many times on that ground pounder exhaust
Beautiful bike. I thought I was tripping, I’m like why the bike keep changing in every video 😂 🤦🏿♂️. I just woke up 😂 my brain wasn’t fully on.
I vote the Cobras.
Where did you get your air intake? I like it and where do you buy most of your accessories at like mirrors and so fourth? Thanks so much.
I have a link in my other fury video for the intake. I bought it on Amazon and used the Kuryakyn Velacipitor intakes adapter. Mirrors were Amazon too though they don't sell them anymore.
Did the holes in the bath oils of the original exhaust make a big difference at all and sound wise and accelerating wise and give it a little bit more throaty sound
Fantastico 👍🏻👍🏻👍🏻 super FURY
do you think this bike would be good for a starter/intermediate rider?
That last set looked like shyt...
Did you do anything else to the bike computer after slip on installation or it was just plug and done?
Thanks
mrjtful Boy yes you should always
it depends on the extent of the exhaust and how much more free flowing it is... with the high flow air filter and extremely free flowing exhaust, yeah a tune would be needed. with just the 3 inch slip ons or drilled factory exhaust, you could get by without a tuner.
As a general rule of thumb, if you don't notice a performance decrease or idle roughness or anything like that, then you don't need a tuner.
what brand of forward controls are those? I like the side pegs.
Whats that idle set at? It sounds quite a bit lower than stock
How’s you black out your headlight enclosure plastic dip?
Hi, how did you dril the hole in to the stock exhaust. thx
If you look at the back of the muffler there are two small holes. I took a 12" long 1/2 " drill bit and drilled each of those holes into 1/2" holes.
poolboybiff1 . what did you do whit the pieces you drild out. did they om out easy. thx
The material I drilled out was more of a dust than chunks. I did take a magnetic wand up the holes at first but not much came out. When you start the bike the exhaust pressure will push out the rest.
poolboybiff1 ok thx for the info en your time
I thinking to lower may fury do you now enybody ho has done this. Is already very low so I heve somme litle douwts
Put the stock exhaust back on sounded better plus u won't burn the shit out of your leg nice looking bike ride safe
how did you do the American flag on your speedo?
Gravestarr Customs will make anything you want. I emailed him a description of what I wanted and he drew it out. We emailed back and forth a couple times to change/add some things. $35 and a week later it was in my mailbox. gravesj44.m.webs.com
The last ones look like you got them out of a junk yard.
lol
@@poolboybiff1 what are those? sideshots?
الصوت فيه مقووووووووووووووووووود
Those so called "ground pounders" are dangerous. How the hell do you put your foot down to stop? You'd burn the shit out of your leg and ankle!