I was a Printer in a press at Faridabad, India long ago, I also use this machine for die cutting and printing, in those days we feed the paper by left hand by a speed over 2000 impressions per hour, depending upon the size and thickness of paper, also especially for every Machine there is an assistant also for that fellow is expert in taking the printed paper out of the Machine by standing at the right side corner of the Machine man(printer), ie., by the left hand we feed the paper by both hands and the helper beside me took out the paper by the right hand and put it in orderly at the table mounted on the right side, by this way we can assure a large sum of printed items per day, I am so happy to see your way of handling this Chandler Machine, many greetings from Kerala, India 🇮🇳, God bless 🙌
This is insulating paper. I use it because it is hard and provides stability when printing. Originally, it was used on the floor when foil stamping, but it is also used well for printing.
this was really interesting to watch! your work is very clean and beautifully done. May I please know how you stick the foil plate onto the machine to do the gold foiling?
Hola, me gustó mucho tu video. Tengo una máquina igual que no uso y ya me había olvidado las maravillas que hace. Dime dónde puedo conseguir los troqueles o tú misma los haces a tu medida???. Gracias
Nice to meet you. This machine was purchased in the United States. The foil device was manufactured by an industrial company in Korea. The work is possible only by sending the machine.
thank you for your reply. I saw that double sided glue ... what is it? Which brand? I've tried a lot of them but they peel off. Thanks in advance for the reply
There are a lot of stops - it’s difficult to insert the original. Very slow speed when embossing - either the foil will float or there will be a failure to print (a hole above the R). Why press then? Why not increase the pressure and apply pressure when stamping? At temperature the print becomes matte, but when it cools down it is not compatible (expansion coefficient of the metal). The deckle is softer and there is more pressure))) and everything is ok! But faster!
Pls l will want to know the type of tape you use on the Bakelite and where to get it and does the cutting blade cut though Bakelite bedding, l run a shop like yours, this video is greatly helpful l see very clean cut and scoring thumbs up
저도 원래 디자인만 했었습니다. 결과물을 직접 만들어 보고싶은 생각에 시작하게 되었습니다. ^^ 요즘은 정말 힘든거 같습니다. IMF때 보다 더 힘든날들을 보내고 있습니다. 예상은 했지만 점점 인쇄가 쇠퇴하고 있는 것으로 보입니다. 그래도 저는 버터보려고 합니다.ㅎ 힘내세요. 화이팅입니다.😊😊
@@w_letterpress Thank you very much. By the way, can you show me where i can buy it or the key word to search on google? I searched for this product but only the one without glue
In Korea, it is sold only in printing materials. There is not much demand for it, so there is no place to sell it online. If you find rubber without adhesive, you can purchase double-sided tape with it and stick it to the rubber.
@@w_letterpress Danke! Ja die Sicherheit ist wichtig! Trotzdem eine professionelle und wirklich schöne Kunst! Ich kann euch stundenlang zusehen. Wirkt sehr beruhigend und entspannend. Kunst eben in Vollendung! Danke fürs Video.
This is beautiful. I too want to start my own business but don't know name of these machine and from where i can buy it😭😭😭😭😭 can you help me with that please
Nice to meet you. The machine name is Chandler&price. This equipment is American equipment. Equipment is usually used for about 100 years. You can purchase it through Google search. It is easier to purchase if you prepare delivery before purchase.
These are called Letter Press Machines, there are many different makes and models. Depending if you want a more automated one or a hand operated one it can vary in price. This particular one they use in the video looks like its already electric powered and has a heating plate some models work with cranks and levers or do not have the option to do foiling like they showed here. You can do more research on it if you just search up Letter Press.
Nice to meet you. Technicians in Korea usually use bonds. When heat is given, it is bonded slowly. The downside is that it leaves marks on the base plate. So, periodically sand the base plate. So, I use double-sided tape with good adhesion. When applying pressure, you need to press and hold for about 20 seconds.
Nice to meet you. The equipment used here is an American equipment called Chandler&price. This is a 100 year old device. I think it's still available in the US.😊😊
Gorgeous product! Interesting that it was 3 trips through the press to do the job - I would've thought you could combine the diecut with the deboss of the foil on the second pass through to save time.
another great video, I do SO appreciate watching these!!! can you tell me what the name of that tool is that helps you press the fold. it's grey and rounded. I really just need to know what search term to use to find it. I've been looking for something like that for months!!!
Hi, For creative 3D pop up greeting cards, pop up die cut advertising brochure, pop up catalog, children's popup books, pop up paper toy’s ... Contact Designer/ Paper Engineer- Kaku: +91- 9899146678, Delhi, India. website: www.popupdiecutcards.com
This is not a machine for sale. I brought in a used machine from the US, processed it separately at the factory, and installed the foil device. I purchased the machine through Google search and paid more for shipping than the cost of the machine.
I love your RUclips videos! Do you make your own dies for die cutting? And what kind of placeholder tabs are you using on your platen to hold the stock? Very cool!
nice to meet you. Thank you very much for watching. Die cutting is available separately. I request it and receive it there. The guide tab is made by carving a piece of Bakelite 2mm.😄😄
Thanks for the advice. I am not a professional die cutter. I am using my own way. Could I see a video with a better way? I am making a RUclips video or applying it to what I do in a nearby print shop.
So you use that machine for a long time but you trip when u reset the counter, great company but unprofessional employee. Dont do videos where you show your non knowledge! is a shame.
I am not an expert. If you think only experts should upload videos, I think it's not right. I am still trying. It's been a year since I used this equipment. I will continue to challenge.
«People usually have weird expectations in YT» Bruh only you have weird expectations. Non klowedge and mistakes is normal thing, part of our lifes, its helps realize that no one ideal and we are all human beings
Thank you for those kind words. To be honest, I don't know what the part about mistakes is. Actually, I didn't learn from anyone to do the work, but I also made it by watching videos that many people work on through RUclips. In addition, we delivered the exact quantity and actual products shown in the video to real customers. Honestly, when I hear these words, I feel empty. What is YT?
@@w_letterpress Sorry if I put my words wrong. I didn't mean you specifically did some mistakes, in my opinion your job is perfect. Thank you for your awesome videos! I just told Wonder90 that he or she shouldn't require people always to be perfect. YT - RUclips i guess:)
아.. 정말 고대의 기계네요. 외국유튜브에서 몇 번 보긴했는데.. 돔숑이랑 금박이 같이 되는.. 면판을 저런식으로 처리할거라고는 예상도 못했습니다. 소모품비도 만만찮아 보이네요..
정말 수작업의 끝판왕인듯.. 조시보는것도 그렇고 .. 고생많으십니다..
안녕하세요. 박 장비와 톰슨한 장비는 거의 100년정도된 장비입니다. 사용해 보니 아직도 훌륭하게 작동됩니다. 소모품 비용보다는 손이 많이가서 인건비 부분이 가격에 영향을 많이 미칩니다. 사실 제가 좋아서 하는 부분이커서 일이 고생스러워도 커버가 됩니다.😊😊😊
이제부터 봉투 하나 하나 잘 보관할게요 이렇게 정성이 많이 깃든 물건인줄 미처 몰랐네요
앗 주문하신 분인가요??? 감사합니다.^^
I was a Printer in a press at Faridabad, India long ago, I also use this machine for die cutting and printing, in those days we feed the paper by left hand by a speed over 2000 impressions per hour, depending upon the size and thickness of paper, also especially for every Machine there is an assistant also for that fellow is expert in taking the printed paper out of the Machine by standing at the right side corner of the Machine man(printer), ie., by the left hand we feed the paper by both hands and the helper beside me took out the paper by the right hand and put it in orderly at the table mounted on the right side, by this way we can assure a large sum of printed items per day, I am so happy to see your way of handling this Chandler Machine, many greetings from Kerala, India 🇮🇳, God bless 🙌
thank you so much. And I'm glad you did the same. I still have a lot of shortcomings, so I'm still working hard. Thank you so much for encouraging me.
이번에 명함 주문하려고 알아보는데 전문성있게 설명도 잘 해주시고 이렇게 영상까지 올려놓으시면 완전 100%믿고 맡길게요!!
칭찬 감사합니다. 예쁘게 만들어 드릴께요 😊😊😊
Wow! Beautiful Craftsmanship!
Thank you very much ☺️ 😊
Great video, thank you for keeping this wonderful craftsmanship alive!
Thank you very much 😊
@@w_letterpress very nice
Thank you very much 😄😄😄
Very nice
Thank you very much 😊😊
Excellent video! I am a lifelong printer and I ran letter press. I like the American folk music in a Korian video sez, Billy O'Damit
:)
Just amazing!! How can I convert an old letterpress machine into a hot foil printer?
¡Maravilloso! Las verdaderas ¡Artes Gráficas! 👏👏👏
:) Thank you so much :)
Thank you for sharing the ENTIRE process!
:)
This soundless machine
Thank you very much 😊😊😊
6:14 hi!!! Is it an insulating brown envelope? What is it made of? And what do you put inside and what marerial is it made of? Thank you
This is insulating paper. I use it because it is hard and provides stability when printing. Originally, it was used on the floor when foil stamping, but it is also used well for printing.
@@w_letterpress thanks!!!!
Very Neace. Congratulations
Thank you very much ☺️ 😊
Beautiful Work💙
Thank you very much 😊😊😊😊
this was really interesting to watch! your work is very clean and beautifully done. May I please know how you stick the foil plate onto the machine to do the gold foiling?
nice to meet you. I use double-sided printing tape to attach the plates.😊😊
Very nice end result, really well done!
Thank you very much :)
Nice upload friend ,amazing work👍👍👍
Thank you very much 😄😄😄
It was good to watch this video. The logo is very beautiful. I love the way it shines
Thank you very much 😄😄😄
Hola, me gustó mucho tu video. Tengo una máquina igual que no uso y ya me había olvidado las maravillas que hace. Dime dónde puedo conseguir los troqueles o tú misma los haces a tu medida???. Gracias
Nice to meet you. This machine was purchased in the United States. The foil device was manufactured by an industrial company in Korea. The work is possible only by sending the machine.
신세계네요 ㅋㅋ 대단해욤
감사합니다 😄😄😄
안녕하세요~ 레터프레스 자료 감사합니다^^
혹시 목형 중간에 스펀지? 같은건 어떤것을 쓰셨는지 알수있을까요?
칼 사이 공간에 종이가 말려들어가는 것을 방지하는것과 약간의 완충작용 용도로 부착합니다. 재질은 고무입니다.😃
@@w_letterpress 앗, 빠른답변 감사합니다^^
언듯보기에 스펀지인줄알았는데 고무였네요~
레터프레스 공부중인데 많은도움이되었습니다!
좋은하루되셔요~^^
Very satisfying to watch! May I ask is it only one machine you used for this whole video? Thanks
Thank you. I used two equipment, one for printing, Candler&Price, and one for foil, Candler&Price.
@@w_letterpress both letterpress? thank you
So relaxing. Nice.
Thank you very much 😊😊😊
me encantan estas troqueladoras de antes . muy artesanal sus trabajos. saludos desde argentina
Muchísimas gracias😄😄😄
Beautiful work, lovely video. I'm into handcrafts of all kinds and I wish I could have this in my mini office-shop!
Nice to meet you. This is requested by the customer and cannot be provided.
플릭입니다
좋은 아이템을 만나 반갑습니다
hello, can you please tell me which glue you use? ... I'm having trouble gluing pearl cardboard
Nice to meet you. When it comes to envelope adhesion, I used double-sided tape.
thank you for your reply. I saw that double sided glue ... what is it? Which brand? I've tried a lot of them but they peel off. Thanks in advance for the reply
@@maremare4418 It is a Korean brand adhesive. I don't know if it's possible to export, but I'll give you the site address.
www.kuill.co.kr/kuill.htm
@@w_letterpress thank you very much. Have a nice day! 👋
There are a lot of stops - it’s difficult to insert the original. Very slow speed when embossing - either the foil will float or there will be a failure to print (a hole above the R). Why press then? Why not increase the pressure and apply pressure when stamping? At temperature the print becomes matte, but when it cools down it is not compatible (expansion coefficient of the metal). The deckle is softer and there is more pressure))) and everything is ok! But faster!
Thanks for the advice. If you increase the pressure when foil stamping, the foil will smudge and print.
Did you add the heating element or is orginal like that ? What is the mame of that machine
Nice to meet you. This machine is equipped with a heat device. mame???
Pls l will want to know the type of tape you use on the Bakelite and where to get it and does the cutting blade cut though Bakelite bedding, l run a shop like yours, this video is greatly helpful l see very clean cut and scoring thumbs up
So very cool to watch
Thank you very much 😊
인쇄디자인하는 사람입니다. 디자인만 할줄알지 오시 금박 과정은 처음 보내요ㅎ 요새 을지로 많이들 힘들다고 하시는데.. 저도 일이 많이 줄어 걱정입니다.
저도 원래 디자인만 했었습니다. 결과물을 직접 만들어 보고싶은 생각에 시작하게 되었습니다. ^^ 요즘은 정말 힘든거 같습니다. IMF때 보다 더 힘든날들을 보내고 있습니다.
예상은 했지만 점점 인쇄가 쇠퇴하고 있는 것으로 보입니다. 그래도 저는 버터보려고 합니다.ㅎ 힘내세요. 화이팅입니다.😊😊
Wooowww.... Ancient machine 😂😂.. I had two of those only smaller and had been modified...
😄😄😄😄
beautiful works and Thanks for the video !
Thank you very much 😊
수작업 말고도 전체가 자동화되는 기계도 개발되어 있나요??
잘모르겠습니다. 100년이 넘는 장비들이고 그이후에 인쇄 방식들이 다 바껴서 프레스 방식들은 거의 없어진걸로 알고 있습니다.
자동으로 하는 장비들이 남아 있지만 현재 생산하는 장비는 없는것 같습니다.
incredible work!!!
Thank you very much 😄😄
Finally answered my curiosity
😄😄😄😄😄
How much would a custom envelope like this cost on a run over 900?
🤐😅😅😅
I love your work, May I know what is the foam sheet you put on the die cutting mold?
Nice to meet you. The one used here is rubber. There is glue on one side.
@@w_letterpress Thank you very much. By the way, can you show me where i can buy it or the key word to search on google? I searched for this product but only the one without glue
In Korea, it is sold only in printing materials. There is not much demand for it, so there is no place to sell it online. If you find rubber without adhesive, you can purchase double-sided tape with it and stick it to the rubber.
@@w_letterpress okay, i got it. Thank you very much
@@NhanNguyen-zl6kt Try use Ethylene-vinyl acetate (EVA)
서울여대 봉투 예쁘네요~^^
감사합니다 😊😊😊
Wow amazing gaes mantep
Thank you very much 😊😊
what are those black squares you use to hold the paper? 🥺
It is a hard plastic called Bakelite. :)
What that envelope is for ? Such a odd shape and size 😢
I'm not sure what the envelope is used for.
Super 👍
Thank you very much 😊
무늬를 찍는 금속판은 어떻게. 만들어지나요?
안녕하세요. 저희는 보통 아연판을 사용하는데요.
전문 제작업체에서 만들어 제공받고 있습니다. 개인이 만들기에는 어려운 부분이 많습니다. 화학용제도 들어가고 노하우가 필요한 작업으로 알고 있습니다. 모든 업체가 동일한 퀄리티가 나오지는 않습니다.
@@w_letterpress 제작업체 소개 받을수 있는지요 ~^^
Das ist so eine schöne Arbeit!
Hatte aber mal Angst, dass der seine Finger einklemmt.
Freut mich, dich kennenzulernen. Die Ausrüstung ist nicht so gefährlich wie Sie denken Wir achten jedoch immer auf die Sicherheit. Vielen Dank😊😊
@@w_letterpress Danke! Ja die Sicherheit ist wichtig!
Trotzdem eine professionelle und wirklich schöne Kunst!
Ich kann euch stundenlang zusehen.
Wirkt sehr beruhigend und entspannend.
Kunst eben in Vollendung!
Danke fürs Video.
this is great, whats the name of that machine?
Thank you very much. Chandler&price 10x15.😊
What make of the letter press is this?
This is a printing press made 100 years ago. :)
This is beautiful. I too want to start my own business but don't know name of these machine and from where i can buy it😭😭😭😭😭 can you help me with that please
Nice to meet you. The machine name is Chandler&price. This equipment is American equipment. Equipment is usually used for about 100 years. You can purchase it through Google search. It is easier to purchase if you prepare delivery before purchase.
These are called Letter Press Machines, there are many different makes and models. Depending if you want a more automated one or a hand operated one it can vary in price. This particular one they use in the video looks like its already electric powered and has a heating plate some models work with cranks and levers or do not have the option to do foiling like they showed here.
You can do more research on it if you just search up Letter Press.
This machine very nice brother
😄😄😄😄
What type of paper is that?
Nice to meet you. This paper is made in England under the name of Color Plan.😊😊
i dont get it how put the metal logo to the machine? with glue? the medal is hot?
Nice to meet you. Technicians in Korea usually use bonds. When heat is given, it is bonded slowly. The downside is that it leaves marks on the base plate. So, periodically sand the base plate. So, I use double-sided tape with good adhesion. When applying pressure, you need to press and hold for about 20 seconds.
Sir, what is the name of that machine you are using? so much interested...
Nice to meet you. The equipment used here is an American equipment called Chandler&price. This is a 100 year old device. I think it's still available in the US.😊😊
How to change a letterpress machine like this?? Can u help pls
Nice to meet you. I made it in a refurbishment factory in Korea. They don't reveal their know-how.😅
Can u pls tell me the name of the refurbished factory ? Thanks and the machine is superb
I don't know either. The seller took care of it.
Gorgeous product! Interesting that it was 3 trips through the press to do the job - I would've thought you could combine the diecut with the deboss of the foil on the second pass through to save time.
😅😅😅😅
whatsapp:0086-13732005787 or mail:caishunmachine@163.com we are manufacturer for cutting&gold embossing machine
Amazing Love from Pakistan
Thank you very much 😊😊😊
Esto funciona al calor
another great video, I do SO appreciate watching these!!! can you tell me what the name of that tool is that helps you press the fold. it's grey and rounded. I really just need to know what search term to use to find it. I've been looking for something like that for months!!!
😄😄I didn't know the name at first, so it was difficult to buy. Search for "bone folder".
Hi, For creative 3D pop up greeting cards, pop up die cut advertising brochure, pop up catalog, children's popup books, pop up paper toy’s ... Contact Designer/ Paper Engineer- Kaku: +91- 9899146678, Delhi, India.
website:
www.popupdiecutcards.com
5:38
How do I make that template?
It is installed at the same time in the factory where it is installed, so I do not know where to make it.
명함 멋져요~^^
감사합니다 😄😄😄
What card are you using?
Nice to meet you. We only deliver envelopes to customers, so we don't know what kind of content card is.😅😅
Very important video.Amazing.
Thank you very much 😊
Wow, que bonito, y complicado a la vez.
Thank you very much 😄😄
What is this base brown paper
It is insulating paper.
Good job
:)
That's great
Thank you so much.
Can i buy this machine
This is not a machine for sale.
I brought in a used machine from the US, processed it separately at the factory, and installed the foil device. I purchased the machine through Google search and paid more for shipping than the cost of the machine.
@@w_letterpress ok no problm
Whats the name of the shiny orange sheet that goes under the stock? 🤔🙏
'Bakelite' Thank you ^^
felicitaciones, que trabajo tan pulcro
Thank you very much 😄😄😄
very good
Thank you very much 😊 ☺
I love your RUclips videos! Do you make your own dies for die cutting? And what kind of placeholder tabs are you using on your platen to hold the stock? Very cool!
nice to meet you. Thank you very much for watching. Die cutting is available separately. I request it and receive it there. The guide tab is made by carving a piece of Bakelite 2mm.😄😄
HOLA YO TAMBIEN HAGO ESTOS TRABAJOS AQUI EN MEXICO SALUDOS QUE ESTE BIEN
Encantada de conocerte. ¿Lo haces de la misma manera?
Good nice
Thank you very much ☺️ 😊
*You can read "l96l" even if you flipped your device*
*PS: are you trying to flip your monitor? I got you*
4:58 i dont get it
This is also glued using double-sided tape.
도무송과 금박을 이렇게 하는거였군요 맨날 디자인만해서 넘겨만 봤지 이런과정은 첨보니 신기하네요~~ 디지털이 아무리 발전해도 아날로그의 감성은 못느낄거에요 영원히
감사합니다. 작업과정이 번거롭고 답답할 수있지만 완성되면 성취감이 있습니다. 아마도 아날로그의 매력인것 같습니다. 😊😊
Good 👍
Thank you very much 😊
Здо'рово!!!👍👍👍
Благодаря ти много😄😄😄
good
Thank you :)
Amazing
Thank you very much 😊 ☺
Hi 👋I Love Your Video, New Subscriber, How Can I Purchase Your Envelopes Lovely Work. Thank You 😃
Nice to meet you. The envelopes shown in this video are not for sale. It is a product made to order upon request from the customer.😅😅😅
Thank You😃
아주 좋아요ㅋㅋㅋ
감사합니다 😄😄
Nice
Thank you very much 😊
Nice I'm designer
Thank you very much 😊
It's beautiful, but 100 envelopes take 5 years. (Kidding)
no. It took 10 years to make it.🤥🤕
아주 재미있어요.
감사합니다.😊😊
Price of this machine
It is difficult to get an accurate price by buying it in the US and remodeling it in Korea.
What number
Number?
99996 85998whatsapp
@@technicaldemrot757 Sorry. I don't know where the number is.
Great
Thank you very much 😊
오시 뒷면을 테이프로 처리해도 잘 나오네요 ㅎㅎ
네 ㅎㅎ 안녕하세요. 청테이프가 제일 좋은것 같습니다. 예전에는 종이를 붙이고 오시부분만 파서 작업했는데 훨씬 간편하고 좋습니다.^^
@@w_letterpress 저는 도무송집에서 오시에 끼우는 커버를 조금 얻어다쓰고 있어요 ㅎㅎ 다음엔 저도 청테이프 한번 써봐야겠네요
Tyt
الغاليين علينا من غير اهداف
شكرا جزيلا لك.
Hi
Hi😊
باكام فين
korea. :)
MiHajLo Markov
Mm girinon
not good
😩😩😩
@@w_letterpress
sorry I was also a diecutter... the way you hold the paper loading and unloading is not proper as a diecutter.
Thanks for the advice. I am not a professional die cutter. I am using my own way. Could I see a video with a better way? I am making a RUclips video or applying it to what I do in a nearby print shop.
@@w_letterpress
I was a manual diecutter before. I do not have a video...
Thank you. I will see if there is a better way and think about it.
99 CRORE
So you use that machine for a long time but you trip when u reset the counter, great company but unprofessional employee. Dont do videos where you show your non knowledge! is a shame.
I am not an expert. If you think only experts should upload videos, I think it's not right.
I am still trying. It's been a year since I used this equipment.
I will continue to challenge.
@@w_letterpress Great to hear that, but better test it before and know how to do it, people usually have weird expectations on YT. Good luck !
«People usually have weird expectations in YT»
Bruh only you have weird expectations. Non klowedge and mistakes is normal thing, part of our lifes, its helps realize that no one ideal and we are all human beings
Thank you for those kind words. To be honest, I don't know what the part about mistakes is. Actually, I didn't learn from anyone to do the work, but I also made it by watching videos that many people work on through RUclips. In addition, we delivered the exact quantity and actual products shown in the video to real customers. Honestly, when I hear these words, I feel empty.
What is YT?
@@w_letterpress Sorry if I put my words wrong. I didn't mean you specifically did some mistakes, in my opinion your job is perfect. Thank you for your awesome videos!
I just told Wonder90 that he or she shouldn't require people always to be perfect. YT - RUclips i guess:)
Brother Aap apna what's number to share kr dain
sorry. I don't use WhatsApp.
Nice
Thank you very much 😄😄😄