How to Make A Simple And Easy Arduino Robot For Science Project
HTML-код
- Опубликовано: 14 ноя 2019
- Hello guys, In this tutorial I am going to show you how to make a very simple and easy Arduino Robot for your science project. So let's get started :)
Please subscribe ❤️ and turn on notifications! 🔔 bit.ly/2WlyA8Y
Thanks For Watching
✅LIKE ✅SHARE ✅ COMMENTS✅ SUBSCRIBE
-------------------------------------------------------------------
Parts Required
(Baggood.in)
1) Arduino Uno - bit.ly/2Fz8M4q
2) Arduino Motor Driver Shield - bit.ly/2VWaYsn
3) TT Gear Motor (2x) - bit.ly/2Rtg2G9
4) Rubber Wheels(2x) - bit.ly/32I5fZG
5) Servo Motor - bit.ly/2Soq7E4
6) Ultrasonic Sensor - bit.ly/2RzebL7
7) 18650 Li-ion Battery - (From PowerBank )
8) Battery Holder - bit.ly/2sulLwu
9) Male and Female Jumper - bit.ly/2su6mfM
10) DC Power Switch - bit.ly/2FtyEzs
11) Acrylic Sheet - (Local Store)
(Amazon.in)
1) Arduino Uno - amzn.to/35flEXS
2) Motor Driver Shield - amzn.to/30Z9ijj
3) TT Gear Motor and wheels set - amzn.to/31WSD0Z
4) Servo Motor - amzn.to/2IAigNH
5) Ultrasonic Sensor - amzn.to/33fwrQa
6) 18650 Li-on Battery (2x) - bit.ly/2CZabQ7
7) 18650 Battery Holder - amzn.to/33iY4b3
8) Male and Female Jumper wire - amzn.to/2MmRjOE
9) Acrylic Sheet - (Offline Store)
10) DC Power Switch - bit.ly/2FtyEzs
[Flyrobo.in]
Arduino Uno: bit.ly/2m8HZnL
Motor Driver Shield: bit.ly/2mvO7XL
Wheels: bit.ly/2kxPeFF
TT Gear Motor: bit.ly/2m4fMid
servo motor: bit.ly/2MIdoaB
Ultrasonic Sensor: bit.ly/2McGLm1
Male and Female Jumper wire: bit.ly/2mu0aVo
--------------------------------------
Circuit Diagram - bit.ly/3fWsKFH
Code - bit.ly/3jCOWXE
--------------------------------------
More Arduino Related Project :
1) Arduino Human Following Robot - • How To Make Arduino Hu...
2) Arduino All-in-one Robot - • Arduino All-in-One Robot
3) Arduino Metal Detector Robot - • How To Make DIY Arduin...
4) Arduino Obstacle Avoidance Robot - • How To Make A DIY Ardu...
5) Arduino Voice Control Robot - • How To Make DIY Arduin...
6) Arduino Gesture Control Robot - • How To Make DIY Arduin...
--------------------------------------------------------------------------------------------
Contact me
Facebook: / surajit.majumder.165
Instructables: www.instructables.com/member/...
twitter: / diybuilder1
Instagram: / diy.builder
------------------------------------------------------------
🎧 Background Music
Track: Jazzy - LiQWYD [Audio Library Release]
Music provided by Audio Library Plus
Watch: • Jazzy - LiQWYD | Free ...
Free Download / Stream: alplus.io/jazzy
Track: Perspective - IVAAVI [Audio Library Release]
Music provided by Audio Library Plus
Watch: • Perspective - IVAAVI |...
Free Download / Stream: alplus.io/Perspective
-------------------------------------------------------------
#ArduinoProject #ArduinoRobot #ArduinoCar 
Хобби
You are ranking number 1 for the search term: building arduino robot. Well done!
I love it! I could probably code this. To those who cannot I recommend O'Reilly Head First Java to start. This is a book for all ages. You can read about 100 pages in and understand enough Object Orientated stuff to go through the libraries. Also, there are free ebooks on wikipedia in the computers category on languages like C(which would help in arduino C), C#, and even Robotics. and of course arduino offers a starter kit with a book that goes through the basics of electrical workings to I think about 10 projects. I hope this helps anyone out there I do understand a lot of young kids watch these kinds of videos as I did too.
Ok
Thank you
Don't you have a book for c++
I uploaded the code and also fixed everything according to the diagram still my robot is not working
Can you help me with that
WOW! you really are the DIY Builder 🏆🏆🏆🏆🏆🏆🏆🏆
I'm still lost just like this robot
XD
@City Bass didn't know lost meant poor
@City Bass Yes but he's saying he didn't know that not that he doesn't know that
Masha Allah fat
Yaaaaa
All videos are excellent . I really enjoy to watch till end
if i had my own space, i'd make stuff like this. i can totally see this being adaptable for a remote control platform, with a camera mount.
BEAUTIFUL !!!!!!!! Gracias !!!!!!!!
Nice preoject bro. The background done with LEDs are super dope.
Can I run this robot with the simple 9 volt battery
@@ashishgupta-hs4qw you can
You have been selected in most underated channels
What do u mean by that
@@tanishasanghvi3005 underated means something really good which often doesn't get recognized
Ooooo
Excellent project 👍
AMAZING PROJECT KEEP IT UP...ITS VERY GOOD FOR SCIENCE FAIRS AND INNOVATIONS CLUB....REALLY I APPRECIATE THIS KIND OF INNOVATIVE IDEA ....PLZ MAKE SUCH ROBO CARS THANK YOU....
Please tell me...... how to attach the switch?
Can we interact with this robot
@@Mikehydra just Attach it in the positive wire. Of the Battery holder
How
Congratulations on 100k sub!
Love it❤️
I did that robot and I have some recommendations for you.
First the robot is unestable so is difficult to move.
Second you need have that wheels because if you use another ones it gonna fall
Finally you need that acrylic piece
why we need that acrylic piece
Can you please send the code that you used the one I have isn't working
thanks for the list of materials and their links and this video, there is one 11-12 days for my science exhibition project in school.
I can also use it as a moon/mars rover
Did you make it? I haven’t seen anyone make it!
helped me for my school project
Thanks sir. I will make this in my science Exhibition.
That’s very dope. I have noticed you glued the DC power switch to the battery holder, and I can see some wires.. could you please show the wiring for that part, I think you skipped that step in the video. :)
hey you just because of that you cant tel him the project is dope as if you can do every thing he di be nice next time😡
ok mariasantos?😤
@@mahibala476 wym?
BBr tf wrong with you? 💀
make wall-e using the gear wheels you used a while back and use the ultrasonic sensor like this one
Yes , I made it tooo , thank u mr
Thank you for this tutorial. I've built it and it works wonderfully!
Great to hear!
Can u share me the. Code
Plz tell me how to install the switch in robot plz
How to add lib
@@DIYBuilder The motor has pieces on either side to attach wheels to, so did you cut off one part so you can glue it to the battery pack.
Nice 👍
I,am from Azerbaijan
I love your channel
Thanks
@@DIYBuilder what is the on / off key on the pi bed, please write
Hey man! It's a wonderful video:-)
بارك الله فيك فركة حلوة احسنت👍👍👍
still hoping you make wall-e !!!
True
I will make , just need some time.
@@Mippi12 good luck 👍
hello do you have the design for 3D printer? it would be very useful
Wow I like your robot
My teacher and i like very interesting
Loooks like an obstacle avoiding car with 2 wheels
Amazing project, sir
Thanks
THX for my homework
nice work my friend
i recieved 1st rank in inter school competition
U r awesome
how
I’m am new to this and have never touched a Robot piece ever lol. But I wanna get started. Can someone tell me what all these parts do.
Go study electrical engineering maybe? I don't know too
Super arduino project 👌
Your idea is cool👍👌
Fue muy bueno tu proyecto, pero ¿no compartiste el código fuente?
In description
"Please tell me the app to access the code."
thanks for this video we are working from this at our class
Szily Kálmán, Hungary
ty for sharing this info
Bro,, I am going to make a walking, speaking robot... But I am failing in my programming at Walking part..... Do you know creating about aurdiono programming?
Search it up on google, search up as many as you can, then compare those to yours, you will know where did u failed.
Bro plz show the programming part man it's almost impossible to use it without program
I have updated the links
Can you tell me any three uses please
@@DIYBuilder please can you tell me any three uses please
@@DIYBuilder give me the code
@@jayeshchavan3103 why do you need to know 3 uses? Leave the guy alone
I hope I could make it. But your progect is great 💯💯💯
That is perfect for mazes
Can you control this via Bluetooth with a phone or PS4 controller? I've seen that you can add a Bluetooth module to Arduino Uno but where would I find the code and "how to" in order to make it remote controlled? Thank you!
How to attach the switch to turn it on?
Hello sir
When you plug the USB in do you have to download anything
Pls reply
Saving money from eight months want to make parents proud
not your parents but I’m proud of you :)
me too
I build this robot and it works
Thank you bro
What are you using to add weight to the rear for balance and to keep it leaning back. Is that another 18650?
خ
I noticed that too, it looks like another battery
Can anyone help I tried making this for science exbition using power bank etc.. but it's servo motor is working but the it is not moving
Open servo and give supply to the motors
@Are created I made the obstacle avoiding car by the same channel
Anyway thanks
U making tutorial is googd😁😁🤗🤗🤗🤗
Love from Bangladesh
*Bro its important* I have science exhibition 14 December, and I need to make this bro.. tell me that;
Will it work for sure?
Good as 9th grade project?
I don't want to waste money! Please reply so that I can order parts
it works just made it
Which level science exhibition?
@@caeksafar i asked... which level.. like nationals, regionals or school .. i didnt ask grade
hi bro i am the channel holders brother this video is fake
I'm also 9th grade
Here is some simple code to program your robot.
// Define motor pins
const int leftMotorPin1 = 2;
const int leftMotorPin2 = 3;
const int rightMotorPin1 = 4;
const int rightMotorPin2 = 5;
void setup() {
// Set motor pins as outputs
pinMode(leftMotorPin1, OUTPUT);
pinMode(leftMotorPin2, OUTPUT);
pinMode(rightMotorPin1, OUTPUT);
pinMode(rightMotorPin2, OUTPUT);
}
void loop() {
// Move forward
moveForward();
delay(2000); // Move forward for 2 seconds
// Move backward
moveBackward();
delay(2000); // Move backward for 2 seconds
// Turn left
turnLeft();
delay(1000); // Turn left for 1 second
// Turn right
turnRight();
delay(1000); // Turn right for 1 second
}
void moveForward() {
digitalWrite(leftMotorPin1, HIGH);
digitalWrite(leftMotorPin2, LOW);
digitalWrite(rightMotorPin1, HIGH);
digitalWrite(rightMotorPin2, LOW);
}
void moveBackward() {
digitalWrite(leftMotorPin1, LOW);
digitalWrite(leftMotorPin2, HIGH);
digitalWrite(rightMotorPin1, LOW);
digitalWrite(rightMotorPin2, HIGH);
}
void turnLeft() {
digitalWrite(leftMotorPin1, LOW);
digitalWrite(leftMotorPin2, HIGH);
digitalWrite(rightMotorPin1, HIGH);
digitalWrite(rightMotorPin2, LOW);
}
void turnRight() {
digitalWrite(leftMotorPin1, HIGH);
digitalWrite(leftMotorPin2, LOW);
digitalWrite(rightMotorPin1, LOW);
digitalWrite(rightMotorPin2, HIGH);
}
Thank you very much bro🎉
@@arneskrabana2435bro really this code is work ??
Bro can trust this code because we do this project ,
Wow it is very amazing
You are a robot god
Hi , please I have a question , I'm new in this wonderful field , I already learned C++ language and I'm now learning python language , is it enough to be able to build an Arduino robot ?
And thank you .
yes it is dw about it,,even just c++ is enough
@@angeldust_4518 ok thank you !
How to attach the switch to turn it on?
Sir would you please help. I bought everything mentioned In the video and connected all the connections you showed in the video but somehow the TT gear motors are not working although they work fine when connected separately with a battery. All other components seem fine, the servo is rotating and everything.
If it helps I uploaded the code to arduino before connecting everything.
Also I am using 4 AA 1.5 V batteries.
Arduino move with 5v battery use a battery not cell
@@lakshaykapoor1591 thank you for your suggestion, I will try to use a higher voltage battery perhaps a 9V battery or two 3.7 V batteries
@@hamayunkhan1754 use 9v. The arduino uses 5v but use 9v. It works :D
@@hamayunkhan1754 did it work?
Wonderful Robot car bro
Niyamai
A king request for you. Could you please share me the program or code for doing this project.
It is in the description
Bro can we first upload the code to the board .if the code is uploaded without error than can we attach the motor,servo,ultrasonic sensor. Bro saa fast please
I think that you can, but you may need to make some modifications if you are not exactly following the tutorial. If u are using a servo motor or something, you will need to change that. If you are doing exactly what the video is doing that yes, you should be able to upload the code first.
AWESOME 👌🏻
Super tutorial. I got it working. I had to get the header pins soldered by my mobile phone repair man. I am extremely bad at soldering. But its a neat bot with no loose wires. Thanks!
The motor has pieces on either side to attach wheels to, so did you cut off one part so you can glue it to the battery pack.
@@UnknownSend3r if you mean shaft. I used a single shaft motor.
The next will be portal gun
😂
Brother can u make some thing different and difficult
tell me your idea
@@DIYBuilder can you add something like a vacuum cleaner or anything that would make the robot useful
@@muhammadalvi1514 does it work?
I love the robot bro
verry good and great
Not new same function as old obstackle avoiding car
Thanks alot I mean alot. The code works 100% fine and the circuit diagram is also clean easy to understand and the video itself is a great thing if you want to make an Obstacle avoiding car. I can assure you who ever is reading this comment the video is absolutely true and mine worked great. But still after all of this Im still sad that you are not active anymore as you havent uploaded for few months. Hope you again start uploading. 😁😁
Edit: Hey I saw you today that you liked my comment that means you are active, and that means that you will upload videos now, Im so happy. I have a request, if you upload any video (I hope so please), please react to my comment, Its a request and I will greatly appreciate if you do that!
If there is an problem please let me know by replying this comment, thank you for every video.🙂
hey please see the edited comment @DIY Builder
I think you should react to his comment in your video
Hey can you please help me I am making this robot.
For the 1st time everything was fine but the motor did not work after that I opened everything and made it again but then suddenly smoke coming out from the battery holders or the switch and the wires melted
Please help@@Fastyy_Boy
And please tell me if it is necessary to use green and yellow wires for the motor?
Please reply fast I have to submit it by Tuesday 😢 @Fastty_Boy
I like it. I am working on something similar. Automation using sonic sensors. Great video!
That's awesome!
Thank you sir
Arduino: 1.8.12 (Windows 10), Board: "Arduino Uno"
Sketch uses 3908 bytes (12%) of program storage space. Maximum is 32256 bytes.
Global variables use 87 bytes (4%) of dynamic memory, leaving 1961 bytes for local variables. Maximum is 2048 bytes.
An error occurred while uploading the sketch
This report would have more information with
"Show verbose output during compilation"
option enabled in File -> Preferences.
-Thats what shows everytime i upload it.. can someone help me?
\
Go to new and upload a blank file then try..
@@sujankgowda1119 bro how to install lib
Really late, but try changing the port. It worked for me
Thanks
Really helpful...thanks a lot
Thanks
U could have used mpu 6050 accelerometer with gyro to balance the robot
Avery good project to learn arduino robotics
THNXX😸
Awesome you r perfect👍👍👍👍
thanks
Thanks DIY Builder you help very much😃😄
Most Welcome
Thank you I have made it it's working
sir can u plz help me how do you upload the code,i have try many times but it is sowing error compiling,plz plz plz tell me sir
You are so genius
How to attach the switch to turn it on?
Honestly worth to watch ur videos but please do explain the logic why we r using these parts and suggest alternatives for these parts, and keeping going u r doing good job
Bro soon i will start voice over videos where i will explain every details
@@DIYBuilder Whats the use of that robot sir?
I will try
its a cute robot
Can you please make a robot only using: an arduino uno, jumper wires, 2 servo motors with any kind of horns, a SR04, 2 wheels, an on off switch, and a battery pack?
Super
Excellent videos bro
Great video! thanks!
Glad you liked it!
Awesome robot
The place from you buy things are way cheaper than Amazon . Thanks for giving the link you are great . I also want to make Arduino projects like you🙂🙂🙂😉
Most welcome 😊
@@DIYBuilder please tell me, when i start the robot its only one wheel is moving other not, please tell me how can i resolve this issue... Its urgent
@@ramkumarmishra2940 is it working now
I like this so much
Thanks
hi bro amazing video i make it for my science project bro
love it
I am going to try and make this robot. Can you please tell me what I can use instead of acrylic sheet??
What steps would you have to make to modify this robot and allow it to receive voice control inputs?
Nice.
that was cool music
keep going
Wow i love it