I love how in Australia people replace the holden badges with chevy badges and in the US the opposite is true!! I love this car too. Thanks for the update. I looks great.
More than pretty much, they were manufactured down under. They are a left hand drive holden with a few chevy badges worked in 😁 (just finished switching my bonnet and boot badges to holden, next up is the rim centercaps and my airbag cover . Maybe someday my stereo like he did.
Dang I would have kept the stock Holden screen blue to match the exterior of the car. It would have just been my preference and would have let the continuity, but then again it’s not my car. And I think what you’ve done with yours is awesome!! The fact that you went with the red makes sense. Although there aren’t many other Holden commodores in the states. It definitely does the job of setting your apart from any other Helden commodores you might come across. Especially if you go to a lot of car meetups. I assume there are lots of car meets you go to. And it would be embarrassing if you found another Holden Commodore that had the stock blue screen and the. They look at yours and see a blue screen as well. It will definitelyguve you the rights to say that yours is unique as well as actually custom. Unlike the other ones you might come across at car meets. Having said that. You are one lucky man!!
If you want to do the series 2 badge, You'll have to change your SSV badge to an SS only badge and buy the "VseriesII" Badge (in red if you want SSV redline badge setup) As that is how it is here on series 2 SSV's and CalaisV's. If you want to make that center console as accurate as possible you can always remove the ventilated seat switch and have heated only as we only ever got heated on calais models as well as the special editions.
If it is the same as the Holdens when you are on the fuel economy gauge (12 min mark) hit the button on the end of the indicator stalk and you can change the distance your economy is measured over. For Australia it is 25km 100km and 500km About 15 60 and 300 miles
Really like what you've done with the tail lights.....I'm considering getting the HSV units for my Redline, and upgrading the brakes to the 6 piston Walkinshaw calipers to avoid all the dust. With my car being black the tail light tint should look wicked. Thanks for the instruction and preview. R.I.P Commodore 🇦🇺 R.I.P Holden 🇦🇺
G,day mate. Glad to see them being turned back into Holdens. On my 2017 VF Redline wagon My number plate surrounds say. "Football, Meat pies, Kangaroos and Holden Cars" Know its a rip off of the 50`s Chevy add but You tube our 70`s adds of that name. Get the surrounds and other Memorabilia from "car goodies" They also put out a Just Holdens magazine thats cool. Cheers
Hello. And what a great job you have done. I like yuour tail lights and those big brake too. Just one thing is missing. Lol. The ss badges on the back doors. Well done mate.
I don't know if it's legal in the US but all you need to complete the feel and classic Australian commodore upgrade is the *_Twin 3" stainless steel engine-back exhaust system 1&3/4 headers._* Search exactly what is in bold italics and your mouth will froth.
Hi, i too have a 2016 SS (same color !) Would you mind letting me know the build number and date of build, wanna know if it was built around the same time as mine
How do I change the program for the radio for the Commodore symbol to show up like yours in red on the cluster as well on my 2017 Chevy SS And where can I take the car to have a reprogrammedI'm in Buffalo New York
It's heartening to see our US cousins relabelling the cars as what they really are... HOLDEN Commodores. Your car is great...a real credit to your work. Just a hint on the MyLink unit. If you want to spend the money there's a company in Melbourne (AU) which provides a new box to go in with the stock entertainment system which will give you a better NAV system (cheaper to update) and also Apple/Android mirroring (impossible with the original MyLink systems). They ship to the US and, apparently, it's all plug and play and you keep the original headunit. I am saving up to do this modification on my VF wagon. kayhanaudio.com.au/product/satnav-for-holden-commodore-vf/
I love how in Australia people replace the holden badges with chevy badges and in the US the opposite is true!! I love this car too. Thanks for the update. I looks great.
Only wankers put a chev badge on in Australia.. its frowned upon
@@thetruth00 Yeah, just quietly I agree with you!
Nice update, super cool you were able to get the Holden MyLink!
I just bought a 17 SS. Where did you send your MyLink sent to get it updated? I’d like to do mine as well.
@@b_i_g_m_a_n same
Looks hella weird when I see a person jump into a pretty much, Holden commodore on the left side.
More than pretty much, they were manufactured down under. They are a left hand drive holden with a few chevy badges worked in 😁 (just finished switching my bonnet and boot badges to holden, next up is the rim centercaps and my airbag cover . Maybe someday my stereo like he did.
Best custom video I ever seen this guy shows everything he upgraded I like this guy he’s patient great job!!
The piano black interior conversion is a must, I don't know how I lived with all the chrome for two years
Dang I would have kept the stock Holden screen blue to match the exterior of the car. It would have just been my preference and would have let the continuity, but then again it’s not my car. And I think what you’ve done with yours is awesome!! The fact that you went with the red makes sense. Although there aren’t many other Holden commodores in the states. It definitely does the job of setting your apart from any other Helden commodores you might come across. Especially if you go to a lot of car meetups. I assume there are lots of car meets you go to. And it would be embarrassing if you found another Holden Commodore that had the stock blue screen and the. They look at yours and see a blue screen as well. It will definitelyguve you the rights to say that yours is unique as well as actually custom. Unlike the other ones you might come across at car meets. Having said that. You are one lucky man!!
I dont mind the red so much because the interior has a lot of red accents that kind of blend with the screen. Thanks for the kind words.
If you want to do the series 2 badge, You'll have to change your SSV badge to an SS only badge and buy the "VseriesII" Badge (in red if you want SSV redline badge setup) As that is how it is here on series 2 SSV's and CalaisV's. If you want to make that center console as accurate as possible you can always remove the ventilated seat switch and have heated only as we only ever got heated on calais models as well as the special editions.
If it is the same as the Holdens when you are on the fuel economy gauge (12 min mark) hit the button on the end of the indicator stalk and you can change the distance your economy is measured over. For Australia it is 25km 100km and 500km About 15 60 and 300 miles
Nice total conversion. I would love to do this for my slipstream ss
Great color, really shows off the awesome lines!
Really like what you've done with the tail lights.....I'm considering getting the HSV units for my Redline, and upgrading the brakes to the 6 piston Walkinshaw calipers to avoid all the dust. With my car being black the tail light tint should look wicked.
Thanks for the instruction and preview.
R.I.P Commodore 🇦🇺
R.I.P Holden 🇦🇺
To reduce brake dust you just need to change the pads to a non genuine set.
That is a good looking SS. I’m guessing that is the Mobile Attractions 2.5 splitter.
Matt Price Correct!!
G,day mate. Glad to see them being turned back into Holdens. On my 2017 VF Redline wagon My number plate surrounds say. "Football, Meat pies, Kangaroos and Holden Cars" Know its a rip off of the 50`s Chevy add but You tube our 70`s adds of that name. Get the surrounds and other Memorabilia from "car goodies" They also put out a Just Holdens magazine thats cool. Cheers
Where did you send the screen and how long did it take? Was it a pain to remove everything? Nice car. Thanks!
I want to do this reprogramming. Who is "this guy"?
Hello.
And what a great job you have done.
I like yuour tail lights and those big brake too.
Just one thing is missing. Lol.
The ss badges on the back doors.
Well done mate.
I don't know if it's legal in the US but all you need to complete the feel and classic Australian commodore upgrade is the *_Twin 3" stainless steel engine-back exhaust system 1&3/4 headers._*
Search exactly what is in bold italics and your mouth will froth.
It’s funny that some people here in Australia change the badges to the chevy badges. And here you are doing the opposite.
Everyone in America damn near puts the golden on thm
can you send a link where i could get this done to my 2014 ss
i don't understand why anyone would have an issue with this as long as your honest and don't tell them its an actual holden I see no issue
What’s the information to have the radio updated? Where do I send it?
Hi,
how i can change on my14 chevy sedan?
I don't find anything in Internet.
Kind Regards
🔥🔥❤️❤️
Good looking cool car and mods. No offense but You might consider speeding up the conversation with less words etc. make it sound more exciting.
Can u do this to caprice ppv? Like are the g8 gt, ss, and Holden stuff interchangeable?
Probably
Hi, i too have a 2016 SS (same color !)
Would you mind letting me know the build number and date of build, wanna know if it was built around the same time as mine
How do I get in contact with the programmer?
We’re did you send my link too ?
Hey what size tires are you running ? Mainly the rear want to know what’s the biggest you can run on stocks
Can o get the information so I can send my cluster and screen by chance
How do I change the program for the radio for the Commodore symbol to show up like yours in red on the cluster as well on my 2017 Chevy SS And where can I take the car to have a reprogrammedI'm in Buffalo New York
It's been 2 years... any updates or have you sold the SS
What year is this ss? You did a hell of a job with specs and it looks amazing btw.
2016! Thank you.
Can you please give me more info on how to make my stereo have the Holden logo ? Thank you
It's heartening to see our US cousins relabelling the cars as what they really are... HOLDEN Commodores. Your car is great...a real credit to your work. Just a hint on the MyLink unit. If you want to spend the money there's a company in Melbourne (AU) which provides a new box to go in with the stock entertainment system which will give you a better NAV system (cheaper to update) and also Apple/Android mirroring (impossible with the original MyLink systems). They ship to the US and, apparently, it's all plug and play and you keep the original headunit. I am saving up to do this modification on my VF wagon.
kayhanaudio.com.au/product/satnav-for-holden-commodore-vf/
What company did the update?
Holy wheel gap. Did you raise it?
😂 right
Yea they sit super high from the factory.
How did you get that get to me ASAP please I’m trying to get the same things for my ss
who did you send it in to?
Who did you have to send out your my link to get it reprogrammed? Or is that in one of your previous videos?
Yes would also like to know who does the reprogramming?
David Palmer yeah, please. If you don't mind
A guy by the name of Chris White. He goes by the username of GTPrix on forums.
@@GXPFiend forums ??? Its 2020 what's his instgram or something ???
how do i get holden mylink?
Looks like your in Wisconsin, any ss meets here?
Sadly no. :(
What made you get SS same engine and specs does SS feel faster ??
I wanted the 6 speed. That was the deciding factor forsure.
How about I cool spoiler
Nice total conversion. I would love to do this for my slipstream ss
How hard was it to change the cluster?
It isn't too bad really. Holden did a pretty nice job with assembly/disassembly of the dash.