Это видео недоступно.
Сожалеем об этом.
Hatsan BT65 SB Elite, Removing the Regulator Valve
HTML-код
- Опубликовано: 3 май 2018
- Removing the regulator valve from my Hatsan BT65 SB Elite .22 to test some heavy pellets (starting with JSB Jumbo Beast 33.956 grains) at higher muzzle velocities.
Related video:
"Regulator Valve for Hatsan BT65, Installing and Testing"
• Regulator Valve for Ha...
Join this channel to get access to perks:
/ @unrelatedactivities
Thank you.
Facebook:
/ batskull.asra
Hatsan AT44 .177 vs BT65 .22 grouping, muzzle velocity and energy comparison: ruclips.net/video/-uARRfyj1AA/видео.html
Ωραιο βίντεο. Σήμερα παρέλαβα το αεροβολο καινούριο και μου χανει αερα απο εκείνο το σημείο
Φίλε σε τι διάμετρο το πήρες; Με ενδιαφέρει ένα 5.5 να μου πεις αν είναι καλό. Απλά σφίξε το με ένα Άλεν δεν είναι κάτι πόλους έχω ακούσει να το λένε αλλά η hatsan γενικά τα στέλνει χωρίς αέρα
Hola, tengo un BT65 en 6,35 mm. ¿Dónde puedo conseguir plumas como esta? ¿Cuántos julios tiene el arma después? gracias dieter
boa noite meu amigo,eu tenho uma bt65 elite e ela tem um regulador igual a este ,ele vei com 130 bar como faco pára aumenta ou diminuir a pressao.obrigado .
O ajuste é no parafuso de plástico na ponta do regulador. Eu nunca ajustei este regulador, mas deve ser semelhante ao Lane: sentido horário diminui a pressão, anti-horário aumenta. Não encontrei informação sobre a relação entre o número de voltas e a variação na pressão, se for ajustar, tente antes conseguir informações com o vendedor ou fabricante para não correr o risco de danificar o regulador e perder a garantia.
hej posiadasz może jeszcze hatsana bt 65 sb elite ? jeśli tak prosze cie o pomoc
kupiłem ją ale nie posiadała jednej śrubki z 2 co łączy Tuleje mechanizmu spustowego posiadam te jedną w miejscu wkładania śrutu ale nie mam tej przy spuście od środka
czy jesteś w stanie powiedzieć mi co to za śrubka ? męcze sie ze znalezieniem jej już 2dni jeśli coś to moge wysłać zdjęcia na maila
Are you aware if the procedure is simililar in the AT-PA 44? Thank u in advance for any reply .
Buenas tengo un BT65rb W 5.5
Lleno a 200 bares tiro dos cargadores y se baja a 100 bares.
Es normal ??
Veo que otros tiran 4 cargadores.
Me ayudas ?
Was looking for a video on how to dial it back actually, but this is great too, haha.
Anyone know of an aftermarket valve regulator to dial it back or up or even keep it regulated for all the shots?
Mine looses it's capacity over an amount of shots I've taken.
Thanks in foward!
Hi i have poland Hatsan invader so it is 17j limit do you know how to make it original power mod? and parts?
Can you replace the barrel on this model with larger 9mil barrell?
No.
Bueno vídeo, cómo hago para aumentar la potencia del BT 65 sb W en calibre 22.
Gracias
Gracias. Mira este video, son iguales en mecánica:
ruclips.net/video/jcXBLr2Htl8/видео.html
What do I do if the barrel comes off. In the cylinders stays on the gun because that’s what just happened to me and mine was hollow inside and I have Screwing and screwed it back on several times trying to figure out why it’s not holding air and this time it’s stuck to the gun and didn’t unscrew and I can’t get it to unscrew does this mean I need to return it? I can’t get hats and answer the phone or call me back this is the worst customer service I’ve ever experienced. I bought two guns from them in the last week and they still don’t respond.
En dotant la Hatsan bt 65 d'un régulateur, es qu'on gagne en autonomie, ? Je parle du nombre de coups qu'on pourra tirer alors
Do you need to unpressurize the air tank before removal ?
As shown on the video. first remove the air cylinder, then use the air bleeder to depressurize it completely.
Can you just shoot until empty? Thanks .
Is there any way to remove it without the screw?
Yes, it can be pushed from the other side (but the input valve has to be unscrewed also).
Thank you
Oi amigo! Tem algum risco em carregar a Bt65 com nitrogênio? Parabéns pelos videos!!
Obrigado. Acredito que não, já que o ar é quase 80% nitrogênio provavelmente não faria diferença. Acho que complicaria um pouco em relação ao fornecimento e o equipamento para carga. Em todo caso, uso somente ar comprimido e não recomendo nada além.
Je n'arrive pas à avoir la traduction en français, merci quand même, je suis algérien et c'est la seule langue étrangère que je maîtrise un peu, désolé
you can install big air chamber with regulator and shoot heavy pellets
It is only to do the test, the medium weight pellets serve well for my range (50yd maximum, indoor).
Where would I get a bigger one for my Carnivore .357?
Qualche link dove acquistare il kit?? grazie
Buenos videos tengo un BT65rb W 5.5
Le puedo montar el regulador ??
En otros vídeos veo que perforan el tubo del aire para que el hueco coincida con el del regulador ??
Y se estabilicen las atmósfera.
El tanque mío se construyó en 2012.
Y para montar el regulador debe ser del 2018 el año ??
Olá amigo, sabes como resolver problema na lateral esquerda da Hatsan. Onde trabalha o sistema de rodar o magazine?..desmontei meu e deu merd!..saltou peças e agora não arranjo ninguém para resolver. Obrigado.
acho que nunca abri esta parte. Tente ver no diagrama dela:
www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=9&cad=rja&uact=8&ved=2ahUKEwikv_WK4bHhAhVGK7kGHRnxACQQFjAIegQIABAC&url=https%3A%2F%2Fhatsanairgunsusa.com%2Fwp-content%2Fuploads%2F2018%2F12%2FBT65-SB_Exploded_View-June2013.pdf&usg=AOvVaw0cKX2Bzj9YnzqqUjY4OvjO
Ué ! não estendi bem pq você esta fazendo isso, mas estou muito curioso pra descobrir ... aguardando os próximos vídeos !
É para atirar o JSB Jumbo Beast 2,20 g com mais velocidade e ver se melhora o agrupamento. Podia ter aumentado a pressão no regulador, mas não quis tocar no ajuste dele para não correr o risco de não conseguir voltar ao ajuste atual, que está ótimo para os chumbos de peso médio.
Jaką ma teraz moc ?
Would this damage the rifle
No, originally there is no regulator in the BT65, so it just returns to the original setting.
good work man :)
Thanks!!!
Gostaria de compra uma válvula reguladora do zeca para r8 pode me passar o telefo ?
👍🇦🇿
Thanks!
Φίλε μπορείς να με βοηθήσεις με αυτό το αεροβολο; έχω ένα πρόβλημα και δεν ξερω τι φταίει
Καλησπέρα φίλε τι θέμα έχεις ίσως μπορέσω να βοηθήσω... Σκοπεύω να το πάρω και εγώ... Από Ελλάδα το πήρες;
@@asoasotriadio ναι από βραχνό !! Το βρήκα φίλε μονος μου το πρόβλημα ... δεν είχε ευστοχία καθολου χτιπουσε ακανόνιστα το είχα στείλει στον τεχνικό κ δεν βρήκε τι είχε ούτε αυτός .. τελικά εφτεγε ο σιγαστήρας μόλις τον έβγαλα χτιπουσε κανονικά .. είχε φαγωθεί ο σιγαστήρας εσωτερικά και επηρέαζε τιβ βολή ... μετα διάβασα πως οι κ κάθε σιγαστήρας χαλάει μετα από κάποιος χιλιάδες βολές κ εγώ τον έιχα περιπου 5 χρόνια
@@user-cl4ov9su1k Κατάλαβα, να σου πω από θόρυβο πως πάει κάνει φασαρία πολύ; Και ο σιγαστήρας (υποθέτω είχες της Hatsan;) πόσο πολύ μειώνει τον ήχο; Δηλαδή αν θέλω να ρίχνω που και πού δοκιμαστικές βολές μέσα στο σπίτι με σιγαστήρα θα μπορούσα η θα ακούγομαι σε όλη την πολυκατοικία... Είμαι ανάμεσα σε αυτό και το Hatsan invader
@@asoasotriadio εγώ πηρα έναν air arms οχι hatsan ! Κάνει πολύ δούλεια σκεψου πως αν κατσρις δίπλα στιν κάνη θα σπάσει το τιμπανο ενώ με σιγαστήρα σε πάει περιπου στο 1-10 δηλ είναι σχεδόν αθοριβο φίλε .. κοίτα για το δεύτερο αεροβολο δεν μπορώ να σου πω γιατί δεν έχω γνώμη ! Όμως για το συγκεκριμένο μπορώ να σου πω πως σακατεβει και είναι και απιστευτα ευθιβολο πχ ένα κουτάκι αναψυκτικού στα 100μ το έχεις για πλακα και γενικά εος κ τα 300 μέτρα με ριθμιση διοπτρας κ σλαγκ βληματακια χτιπας !! Εγώ το έχω παρει 6.35 μπορώ επίσης να σου πω πως με μια απλή φουσκοτιρα των 30€ το γεμίζεις σχετικά εύκολα κ κάνεις περιπου 40 βολές με δύναμη !!! Με μικρότερο διαμέτρημα κάνεις αρκετά παραπάνω !! Δεν έχω παράπονο κ το έχω περιπου 5 χρόνια ... ότι άλο θες να με ρωτάς
@@user-cl4ov9su1k Και εγώ αν πάρω θα πάρω το 6.35 είναι φοβερό πολύ δυνατό και το καλό είναι ότι αν θελεις αυξάνεις και την δύναμη λογικά θα το ξέρεις, γυρνάς την βίδα του hammer spring και το φτάνεις μέχρι και 100+ Joule... Απλά σκέφτομαι και το Invader λόγω του semi auto... Έγινε φίλε καλή συνέχεια
does it have a pressure regulator? if I understand correctly it serves to have about the same power despite the pressure in the bottle? so if we remove this regulator there is max power but the power drops after each shot in the same way that a pistol co2 12grs?!
It does not come originally with a regulator, but there are a number of regulators that can be installed inside its air cylinder (Lane, Huma, Altaros and hatsan came to mind now). Yes, the regulator keeps pressure constant inside its chamber, as far as the pressure in the cylinder is above the one the regulator was set to. This way, the muzzle velocity is more consistent and can reach better accuracy. Regarding the behavior of the airgun without regulator, it depends on various factors, but can be as you have described if the hammer has enough force to deliver maximum power when the air in cylinder is at the maximum pressure. If the hammer is adjusted for lower power, the muzzle velocity starts below maximum in the first shots, then increases to maximum and finally decreases. This video shows some graphs that illustrate this:
ruclips.net/video/aBi4rEmfmn4/видео.html
Hope it helps.
@@unrelatedactivities OK thanks a lot !. for you is it better to have a regulator? that does not bridle the power?
En dotant la Hatsan bt 65 d'un régulateur, es qu'on gagne en autonomie, ? Je parle du nombre de coups qu'on pourra tirer alors
What do I do if the barrel comes off. In the cylinders stays on the gun because that’s what just happened to me and mine was hollow inside and I have and screwed it back on several times trying to figure out why it’s not holding air and this time it’s stuck to the gun and didn’t unscrew and I can’t get it to unscrew does this mean I need to return it? I can’t get hats and answer the phone or call me back this is the worst customer service I’ve ever experienced. I bought two guns from them in the last week and they still don’t respond.
If a new product is falling apart one week after purchase, the vendor must replaced it.