Thank you my friend. It worked in my 2015 A6. I did swap out the Sat radio module, so I guess its from that. But it worked and I appreciate it. Now if I can only figure out how to fix my other 3 faults.
Just FYI, you may get a fault code after updating the firmware of your MMI. There's no harm keeping the fault code at all, but the method in this video simply removes it from the ECU to prevent it returning constantly.
Obd 11 same procedure as presented on the video. Just did mine and it worked 100% just go to control units, then multimedia, adaptations then same as here channel 15 then put calculated value under 'new value' then press and hold green tick job done
@@lostwaveyo2mpg564 am înțeles de pe la băieți cel puțin la mine ..ca e de la update soft l am făcut la unu care nu are licienta ...și trebuie confirmat doar online
Am și eu aceeași eroare , Navigația(MMI) îmi face figuri și uneori nu pornește muzica , trebuie sa ii dau restart de câteva ori pana sa pornească, oare sa fie din cauza asta?
Pai depinde daca ai schimbat ceva module in masina. Daca nu ai schimbat nimic e posibil sa ai probleme la cabluri, din moment ce vad o eroare legata de conexiunea optica.
Thanks for the Video , i have a problem my VCDS is deferent in ADAPTATION page , i cannot enter channel etc , i only can choose from list , nothing else its like that www.ross-tech.com/vcds/tour/screenshots/adaptation-uds.png
ok the solution for me is , @ address hex5F - then go to adaptations - then search for IDE02502-Confirmation of installation change. , the value is calculated with the above video and replaced with the result , in case someone in the future need this.
▬▬▬▬▬▬▬▬▬ஜ۩۞۩ஜ▬▬▬▬▬▬▬▬▬
T H A N K Y O U F O R W A T C H I N G !
P L E A S E L I K E A N D S U B S C R I B E !
▬▬▬▬▬▬▬▬▬ஜ۩۞۩ஜ▬▬▬▬▬▬▬▬▬
1 code down! Few more to go, but wouldn't have sorted it without you! Many Thanks
Glad I could help.
Thank you my friend. It worked in my 2015 A6. I did swap out the Sat radio module, so I guess its from that. But it worked and I appreciate it. Now if I can only figure out how to fix my other 3 faults.
Glad my video helped 👍🏼
Thanks!!!! It worked....greetings from Jamaica
Welcome!
You changed the MMI? if the answer is yes, it was a problem with him or we are talking about an update of something better?
I changed the radio unit for an upgrade.
@@UltimateDIY what you put instead?
@@alinovici1666 I've upgraded to the 10 speaker unit, from my original 8 speakers one.
@@UltimateDIY nice man,nice tutorial by the way.
Keep it going👌🏻
Just FYI, you may get a fault code after updating the firmware of your MMI. There's no harm keeping the fault code at all, but the method in this video simply removes it from the ECU to prevent it returning constantly.
Where do you get the computer from? What type of computer is it?
A friend found it next to a dumpster. Yes, for real! :)
It's an IBM X41
merci beaucoup car seul jamais je ne trouve une chose pareil au top merci
Welcome!
This worked great. Thanks!
Welcome! ✌🏼
Hey. Great video 👍
1 question? Do you how to fix this code but with obd11? Thx
Hi. Sorry, but I don't know.
@@UltimateDIY alright.. other question... when you fix this fault, all functions working again? Like rear cam etc
I don't know. Mine were already working, But I just had this error after changing and recoding the radio unit.
@@UltimateDIY ok. Thx
Obd 11 same procedure as presented on the video. Just did mine and it worked 100% just go to control units, then multimedia, adaptations then same as here channel 15 then put calculated value under 'new value' then press and hold green tick job done
thank you very much👍👍👍👍👍👍👍👍👍
Welcome!
Mai am un cod 03175 invalid data set. Ai idee cum pot rezolva? Pana aici nu pot sa spun decat un mare multumesc.👍
Din pacate (sau defapt din fericire) de codul ala nu m-am lovit niciodata, deci nu stiu sa iti spun cum poti sa il rezolvi.
Ai rezolvat cumva colegu ??
@@djmdji2921 nu am rezolvat, am lasat-o asa ca nu ma incurca cu absolut nimic. Atât doar când fac diagnoza cu testerul, îmi apare codul de eroare.
@@lostwaveyo2mpg564 am înțeles de pe la băieți cel puțin la mine ..ca e de la update soft l am făcut la unu care nu are licienta ...și trebuie confirmat doar online
Am și eu aceeași eroare , Navigația(MMI) îmi face figuri și uneori nu pornește muzica , trebuie sa ii dau restart de câteva ori pana sa pornească, oare sa fie din cauza asta?
Am următoarele coduri de eroare:
03276-verificare management soft
00384-Bus de date optic,011-intrerupt-intermitent
03175-unitate de date nevalida
Pai depinde daca ai schimbat ceva module in masina. Daca nu ai schimbat nimic e posibil sa ai probleme la cabluri, din moment ce vad o eroare legata de conexiunea optica.
Audi A5 Coupe 2016!
Thank you!
hi, Does this work for a used airbag module change?
I do not know. Never changed such a module.
Hi, that exactly dealers do for radio?
Hi. Sorry, I don't understand what you are asking.
Its not working on 2013...audi a5 b8.5...including greenmenu dtc...73..not working at all
Thank you
Welcome!
Cum pot să instalez drivere pentru Windows XP?
Pentru ce anume?
Audio, Internet, WIFI
15 doesn't work for me
I changed the power steering in my Audi and after that the parking sensor system stopped completely
It might be component protection
Thanks for the Video , i have a problem my VCDS is deferent in ADAPTATION page , i cannot enter channel etc , i only can choose from list , nothing else its like that www.ross-tech.com/vcds/tour/screenshots/adaptation-uds.png
Maybe this is how it should be for that particular module. Not all of them support the same things.
ok the solution for me is , @ address hex5F - then go to adaptations - then search for IDE02502-Confirmation of installation change. , the value is calculated with the above video and replaced with the result , in case someone in the future need this.
Glad you found a way to do it!
What if i have D7E7 numbers?? How can i calculate new ones??
Thank you very much!
It worked great, keep with the good work!
Best Regards
Welcome!