The 15T & 13T sprocket is not available in India anymore as Aliexpress is banned as well, so there is no import. Besides this the sprocket is not available at any Shop and neither does anyone custom make this in India.
Brother if you remember can you share the measurements of the sprockets mentioned in the ali express, in my guess it was 20mm or something but I forget , I actually did buy 13 t sprocket and used on my pulsar after seeing your video , now I am planning to buy a 15 t sprocket so that why , or if you know any other website pls suggest
I was only able to achieve 151kp/h in this test due to heavy wind blast, with the new 15t sprocket in perfect conditions the bike will be able to cross 160kp/h. There is an approximate 10% to 15% decline in the acceleration of the bike after installing this sprocket and low end pull is gone down as well. If installed on RS200 It will be much better as the RS200 is fuel Injected and has better top end performance compared to NS200.
What if I put 16 t sprocket on my bs3 rs200.& 39t sprocket in rear side, will it be possible to get more than 180 km/h on long stretch of road like express way.
no bro, one of my subscribers has put 15t sprocket front and stock 41t sprocket rear for his RS200 and achieved 167km/h as per speedo. If u put 15t front and 39t rear u might be able to go 170+ only in perfect conditions, but remember it is not good to overgear your bike, changing either one of the sprockets is fine in a stock bike, but changing both sprockets won't be a good idea as you will damage your transmissions and engine
Bro if i use little sprocket in harley davidson 750 belt driven it will increase mileage or not because 750cc engine power decrease but mileage increase ?
Bro can i achieve same results with reducing 2teeth on rear?My stock is 42T My bike is passion pro bs6 I want better highway cruising speeds and easy less vibration riding will this work?Which bikes rear sprocket can I use also suggest
Hi am thinking of changing my front sprocket as well but I am a bit worried about the torque and want to know your experience, do you feel the significant reduction in torque ? if I increase the front sprocket by 1 teeth will the motorcycle struggle to climb in hilly areas
Yes, additonal 1 tooth in front will make the hearing longer reducing the pickup slightly, so it's not recommended for hilly areas, it's only good or highway cruising, but best setup is stock setup
Not good for bumper to bumper traffic and city riding, it's basically for highways, but in 6th gear the bike does not pull as good as stock sprocket. But still I have touched 160km/h with this on a sloping road. check my channel for the video
Bro can u tell me how can i put 15t sprocket on my ns 200?? Which bike's 15t sprocket fits in ns 200 or what teeth back sprocket needs to be to get same effect as 15t sprocket while keeping same 14t on front??
15T sprocket is not available anywhere in market mostly even of other bikes. I had got from Aliexpress app, imported from China. I would suggest u to stick with stock setup as it is the best setup for ns200. Fitting 15t sprocket will decrease ur acceleration and you have power loss in 6th gear making it very hard to cross 145kmph. So plz stick to stock setup. I have used this only to test and make video for knowledge purpose
@@FernmeisterTV yes but i dont care about acceleration loss i wanna try it so. Also, pulsar 150 has 15T sprocket on front, maybe pulsar 150's 15t fit in ns ?? Do you have any idea?
@@FernmeisterTV i brought pulsar 150 15t sprocket but it was 428 pitch instead of 520 pitch so it was smaller and could not fit that, after that i also brought 15T 520 pitch sprocket of duke 390 from ktm showroom but it also did not fit becuase the inner teeth was different of it. And since im from Nepal i cant order anything from International websites because in Nepal international transactions are not accepted yet. Such a bummer man. If u know any bike sprocket that use 15t 520 pitch and also fits in ns 200 sprocket hole please let me know im losing my mind i spend lot of money and timr tryna do this.
Top speed tho bhad zayegi, but pickup kam hoga, aur top speed ponchne keliye bohot difficult hoga our 149 cross karna bi mushkil hoga. Only in perfect weather and road condition will will cross 149
By doing 15-42 u r overgearing ur bike which will damage ur engine and transmission components. Either increase 1 tooth in front or decrease 3 teeth behind. Your mileage can increase, cruising speed will also increase
Hey, I think My bike has pickup issue, there's some power loss while throttling in initial gears. Do you know what might be the problem.? Odo reads 1.8k kms and done with the third service from Bajaj
Hey, yeah I too face the same issue at times, on sudden initial acceleration the bike sort of gives a jerk and then pulls, it is normal for most carbureted bikes. Had asked Bajaj service about it just 2 days ago
I have pulsar 220 stock setup is 14 front and 36 rear I want to cruise on lower rpm I want to install 15 in the front pls give link to buy also can u tell if the one you bought fits pulsar 220
@@FernmeisterTV thanks bro placed order for the same ..now only hoping there will be enough space and the 15t sprocket &chain doesn't touch magnet cover after installation..
Firstly This 15t is not available in India, Aliexpress is banned. Secondly the sprocket would not fit ur bike. You'll have to search for an appropriate sprocket size as per ur bikes setup
Bajaj avenger street has 14t front and 36t rear sprocket. I ordered that sprocket in my NS to have little longer gearing.. will let you know how it goes
Update: Got it delivered today, turns out the avenger's rear 36t sprocket holes are just a "tiny" bit misaligned so it can't fit properly but the workshop people said its possible to fit it by drilling those holes little larger (not a hard process) but i was too bored to take it somewhere else to drill so decided to stay on my stock RS 200 stock sprocket of 14T 41T (On my Bs4 NS) I originally tired to install smaller rear sprocket to see if NS can go 60kph+ or maybe around 65kph on 1st gear using it. Seems like i have to ditch that idea for now but @Fernmeister TV you can try using it.. just have to drill couple of holes little larger and the 36t from avenger will fit proper. I hope you try that
Bro, I know the result, so Im not going to be making any more sprocket mods to my ns nor my 390, cause it's just gonna cause trouble for me in the future, my NS200 is run almost 45000kms now, and I don't want to mess stuff up by changing these sprockets again and again, I dint like the 15t itself, I'm not going to try out this 36t and spend extra for these sprockets when I don't get anything out of it.
@@FernmeisterTV its all right bro.. 36t is even higher gearing than 15t in front from my calculations but i think i need to stick with stock sprocket or RS sprocket since i dont have any roads for high speed in my crowded city. I just wanted to test it out of curiosity. Its all right i love your videos .
@@itsyoboigucci7578 thanks buddy, sticking to the stock setup is best, or the RS200 setup if u want a little bit more pickup. I prefer stock setup as I like the balance of higher cruising speed as well as good enough initial acceleration
Fitting the rear sprocket by removing the tyre and all that is more of a pain in the ass process. Plus this was just for an experiment, I use stock setup on my bike
U cannot do any such modification boss, only thing u can do is ride more efficiently and ride below 80 while shifting gears below 5000RPM to get a good mileage. Or else there is no other way to increase mileage
Both r siblings, but the engine is different and transmission is different which is the main thing. So u cannot use a sprocket setup of some other bike. 1st plz find out ur sprocket setup and let me know then I'll tell u
Yes, reduces engine life and voids warranty of bike. It causes damage to engine when the stock limiter has been crossed, rpm goes upto 13000rpm which is not good for engine, stock limiter is at 10500rpm.
What if I use driver sprocket with more teeth does increases high end top speed or just increases speed at lower time... My question is it's help for TOP SPEED INCREASES or just INCREASE GEAR SPEED BY +5? PLEASE REPLY ASAP
Yes, with 14t sprocket I would be cruising at 100kmph @7k rpm in 6th gear. With 15t sprocket I can cruise at 110kmph @7k rpm in 6th gear. But the pickup in 6th gear with 15t sprocket is bad. Hence u use stock setup only
Thank you for the information and well furnished. The shipping cost is at 2k and the cost of the sprocket itself is some 250 rupees hence seems unreasonable. If your currently not using the 15T sprocket can I buy it from you .
Ok bro.i have rs200.bs3.and 14t 39.t.top speed 164.m8llage 42 to 45.1st gear and 2nd gear is slightly hard.another is shifting easy.what broblem I don't know.blz give idea.
Currently using front 100/80 17 and rear 130/70 17 Tyres. Both r same PIRELLI ANGEL CT. And no, upgrading to 15t sprocket does not increase your performance, it actually decreases the acceleration a little bit. Performance in 6th gear is kinda poor after installing 15t sprocket. This video was just for an experiment
@@shanonsequeira4499 this video is old, after this tyre I fitted the pirelli angel CT. Diablo rosso 2 is a very good tyre, but for track use or for Superbikes. It wears out very soon compared to other Tyres. I have now completed 31000kms. At 29000kms I had changed the Diablo rosso 2 which lasted only 12k kms with normal highway riding
@@FernmeisterTV oh okay . Thanks mate. I am gonna get my pulsar 200ns soon and was not sure about which tyres to go with . I was thinking of size increase to 110 and 150 but didn't want to loose performance.my first preference was apollo alpha h1 130 rear but looks like we don't get it in that size so i am gonna stick with mrf zappers 130 and my b 110 in the front.
Acceleration will reduce slightly, u won't notice a huge difference unless u r drag racing, and top speed will increase by at least 10 to 14kmph. It does not affect mileage, u will get similar mileage, instead of fitting the 15t sprocket i suggest u to fit the ns200 sprocket setup on ur rs200, it is as good as fitting a 15t sprocket
Yes, top speed can go 160+ after actual performance mods, but after installing 15t there is power loss in 6th gear, so 155+ will only be possible on downhills, stock setup is the best
Apache 2004v comes with stock 13T front sprocket, I don't know if the sprocket type and Shaft dimensions r similar to pulsars, if they r same u can fit a 14t sprocket of ns200 to increase top speed. If they r not same as pulsars u ill have to search for a 14t sprocket with same Shaft dimensions as ur stock sprocket and fit
Put the NS200 sprocket setup on ur RS200, 39t rear. I have touched 160 with this 15t sprocket, check the video ruclips.net/video/sYI3G1TJ9yA/видео.html
What if I put 16 t sprocket on my bs3 rs200.& 39t sprocket in rear side, will it be possible to get more than 180 km/h on long stretch of road like express way.
I absolutely do not recommend this as it will spoil your bikes engine and transmission. The only change u can safely make is 15t front OR a 39t rear sprocket. Do not go beyond this as it will spoil your bike. 1st of all this bike does not have the power nor is it designed to go above 170kmph. @SHUBHAM SINGH
The 15T & 13T sprocket is not available in India anymore as Aliexpress is banned as well, so there is no import.
Besides this the sprocket is not available at any Shop and neither does anyone custom make this in India.
Brother if you remember can you share the measurements of the sprockets mentioned in the ali express, in my guess it was 20mm or something but I forget , I actually did buy 13 t sprocket and used on my pulsar after seeing your video , now I am planning to buy a 15 t sprocket so that why , or if you know any other website pls suggest
@dhanuanilkumar2009 Its 20mm only, u can buy a 15t sprocket of the n250, I think that bike has it
@@FernmeisterTV appreciate your quick reply , thank you
Sir , is there any way you can confirm whether rc390 sprocket will match for 200ns coz it has 15 t sprocket
@@dhanuanilkumar2009 does not match, spacing between the holes is very different
I was only able to achieve 151kp/h in this test due to heavy wind blast, with the new 15t sprocket in perfect conditions the bike will be able to cross 160kp/h. There is an approximate 10% to 15% decline in the acceleration of the bike after installing this sprocket and low end pull is gone down as well. If installed on RS200 It will be much better as the RS200 is fuel Injected and has better top end performance compared to NS200.
Were you get bro
Aliexpress app, link in description
How much. Cost
Price varies, usually between 300 to 500
Brother tell about pulsar 180 front chain sprocket change with this 15 teeth?
This is the mod review I've been waiting long for ns 200 🔥👍
Your video series on sprocket modification is very informative... Thank you bro 🙏
Your welcome, and thank u for your appreciation🙏
Bhai mere hornet me lagaya hai 15t per red line tak jaa nehi raha bike aur pick up kam hua per har gear me speed same hai
best combi for me 16T and 45T ridesafe brothers from Philippines
How much top speed u achieved??
Area vasco mure.. baap.❤️🔥❤️
Nice performance upgraded
😂🙌
My bike has front 14t rear 43 now I want to increase initial pickup what should I do and i don't want any load in engine
Leave it as it is to avoid load in engine
@@FernmeisterTV I want to go with 13t is it OK for daily commuting and will any issue in engine? Pickup has very low in my bike
@@bnodlama7004 mostly there will be no issue, u can fit if u want
@@FernmeisterTV thank u so much for your kind reply
Thankyou so much bro... was thinking of doing the same mod with my ns
I am getting handlebar vibration on my ns 200 from 6500 -7500 RPM any solution to this can u suggest?
That is normal, even I get that same vibration between that rpm range, u cannot do anything about it. There is basically no solution for that problem
@@FernmeisterTV thank you bro, I thought maybe something was wrong with my NS.
Balance gear issue will be there
What if I put 16 t sprocket on my bs3 rs200.& 39t sprocket in rear side, will it be possible to get more than 180 km/h on long stretch of road like express way.
no bro, one of my subscribers has put 15t sprocket front and stock 41t sprocket rear for his RS200 and achieved 167km/h as per speedo. If u put 15t front and 39t rear u might be able to go 170+ only in perfect conditions, but remember it is not good to overgear your bike, changing either one of the sprockets is fine in a stock bike, but changing both sprockets won't be a good idea as you will damage your transmissions and engine
@@FernmeisterTV thanks for the detailed information.
Good and long waited review give top speed too
Top speed done in next video ruclips.net/video/sYI3G1TJ9yA/видео.html
Bro Ns160 bs6 phase 2 we can fit ns200 spocket hole And fit Any problem for that?
No idea bro, u will have to check on it. Idk ns160 sprockets
Bro if i use little sprocket in harley davidson 750 belt driven it will increase mileage or not because 750cc engine power decrease but mileage increase ?
Have no idea about Harleys
Love from karnataka
Bro can i achieve same results with reducing 2teeth on rear?My stock is 42T My bike is passion pro bs6 I want better highway cruising speeds and easy less vibration riding will this work?Which bikes rear sprocket can I use also suggest
Which bike 15 teeth sprocket fitting ns200 reply me
N250
Bro can the front sprocket cover will fit the 15t sprocket as it is larger than stock 14t?
No it will not fit when installing 15t sprocket, u have to remove it
Hi am thinking of changing my front sprocket as well but I am a bit worried about the torque and want to know your experience, do you feel the significant reduction in torque ? if I increase the front sprocket by 1 teeth will the motorcycle struggle to climb in hilly areas
Yes, additonal 1 tooth in front will make the hearing longer reducing the pickup slightly, so it's not recommended for hilly areas, it's only good or highway cruising, but best setup is stock setup
How about the ridability in bumper to bumper traffic?
Not good for bumper to bumper traffic and city riding, it's basically for highways, but in 6th gear the bike does not pull as good as stock sprocket. But still I have touched 160km/h with this on a sloping road. check my channel for the video
If you want top end switch to 38t sprocket from avenger 150 street(6 hole) with 2.71 ratio compared to your 2.60 with 15t front
These sprocket videos r just for everyone's knowledge and for experimentation sake. I use stock setup always
What is wrong with my ns200 the headlight was gone and the digital panel and tail lights too.
check for a blown fuse, that's most likely the issue
Pulsar150 me bhi 15 teeth aata hai wo sprocket mera hornet2.0 me lagega kya?
Idk about other bikes sprockets, you will have to research and see on ur own
In RS 200 If we use 15T it will decrease the pickup or it will increase?..
Slight decrease in pickup, not much difference
where can we get a 12t sprocket for vstrom sx any idea?
No idea buddy
Bro can u tell me how can i put 15t sprocket on my ns 200?? Which bike's 15t sprocket fits in ns 200 or what teeth back sprocket needs to be to get same effect as 15t sprocket while keeping same 14t on front??
15T sprocket is not available anywhere in market mostly even of other bikes. I had got from Aliexpress app, imported from China.
I would suggest u to stick with stock setup as it is the best setup for ns200. Fitting 15t sprocket will decrease ur acceleration and you have power loss in 6th gear making it very hard to cross 145kmph. So plz stick to stock setup. I have used this only to test and make video for knowledge purpose
@@FernmeisterTV yes but i dont care about acceleration loss i wanna try it so.
Also, pulsar 150 has 15T sprocket on front, maybe pulsar 150's 15t fit in ns ?? Do you have any idea?
@@itsyoboigucci7578 ok, you can try pulsar 150 15t sprocket. I don't know which bikes sprocket fits, cause I had bought from Aliexpress
@@FernmeisterTV thanks i will let you know if it works.
@@FernmeisterTV i brought pulsar 150 15t sprocket but it was 428 pitch instead of 520 pitch so it was smaller and could not fit that, after that i also brought 15T 520 pitch sprocket of duke 390 from ktm showroom but it also did not fit becuase the inner teeth was different of it. And since im from Nepal i cant order anything from International websites because in Nepal international transactions are not accepted yet. Such a bummer man. If u know any bike sprocket that use 15t 520 pitch and also fits in ns 200 sprocket hole please let me know im losing my mind i spend lot of money and timr tryna do this.
Ns200 bs6 149km/h pe limiter hit ho jata h...149 cross ni kerti ns200 bs6 15teeth lagane se speed badh jaye gi..?? Plz reply
Top speed tho bhad zayegi, but pickup kam hoga, aur top speed ponchne keliye bohot difficult hoga our 149 cross karna bi mushkil hoga. Only in perfect weather and road condition will will cross 149
Would the mileage be affected. Already getting only 23kmpl in city. 2month old. ☹️
No, the mileage won't be affected by this. It kinda remains the same
Bro that web site is not working ... Any another options 😐15t
No other options buddy, 15T not available anywhere in India
I want to increase the top Speed of my rs 200 bs6 which sprocket will be suitable
39t of ns200 bs4
pulsar rs200 change to 15T-38T So good up speed (177km/h Top speed for pulsar rs200 sprocket 15T-38T)
Wow, that's amazing
yes brother
this video ns200 15T 38T ruclips.net/video/6DQK3PzHUO0/видео.html
Bro wats the cost of chain spoket 15 38
Can fix bs4 RS 200 ??
Please mention product link as previous link is not opening. And also name of the brand
Product not available in India, Aliexpress is banned
@@FernmeisterTV From where can we buy it bro please mention
@@hritikbhaskar2724 you'll have to visit China and buy, as I said it's not available anywhere in India
If i change the rear sprocket to 39t for rc200 will it increases top speed??
Yea, but you'll have to also change the rear wheel hub to be able to fit the 39t sprocket of ns
In Passion Pro bs6. Is 14 by 42 , if 15by 37 change, what happened, mileage increase or decrease , Speed up or decrease,
By doing 15-42 u r overgearing ur bike which will damage ur engine and transmission components. Either increase 1 tooth in front or decrease 3 teeth behind. Your mileage can increase, cruising speed will also increase
Hi i am also from goa just wanted to ask Is this possible in as200? And instead 15t can i use 16t
Hi, 16T does not fit in the sprocket space after fitting chain, also 15t is not available in India anymore, I don't know about 16t
@@FernmeisterTV ohk thanks
Hey, I think My bike has pickup issue, there's some power loss while throttling in initial gears. Do you know what might be the problem.? Odo reads 1.8k kms and done with the third service from Bajaj
Hey, yeah I too face the same issue at times, on sudden initial acceleration the bike sort of gives a jerk and then pulls, it is normal for most carbureted bikes. Had asked Bajaj service about it just 2 days ago
I have pulsar 220 stock setup is 14 front and 36 rear I want to cruise on lower rpm I want to install 15 in the front pls give link to buy also can u tell if the one you bought fits pulsar 220
The one I bought fits pulsar 220, u can try it out. Make sure to select 15t below in the options. Link :
a.aliexpress.com/_d7TI4wz
@@FernmeisterTV ok bro the shaft that sprocket fits to is 20 mm right
@@kiran-wh9wg yes correct
@@FernmeisterTV thanks bro placed order for the same ..now only hoping there will be enough space and the 15t sprocket &chain doesn't touch magnet cover after installation..
@@kiran-wh9wg make sure to remove the inner metal plate cover thing like I showed in the video or else it will touch most probably
Can I fit this 15T sporket in discover 100 for improving pulling
Firstly This 15t is not available in India, Aliexpress is banned.
Secondly the sprocket would not fit ur bike.
You'll have to search for an appropriate sprocket size as per ur bikes setup
15 teeth available he bro. India me.. officially bajaj genuine he.
@@uniquerider694 not available
@@FernmeisterTV 99rpm me available
15t sproket Laga neh seh plat nahi lagega kia
Plate nikalne padega
does it harm to any initial related?
Bro how to remove that metal plate that u removed before the vedio
Step 1= Remove sprocket cover
Step 2= remove front sprocket
Step 3= remove plate screws and remove plate
@@FernmeisterTV thx bro need more nice contents like this superb
Bajaj avenger street has 14t front and 36t rear sprocket. I ordered that sprocket in my NS to have little longer gearing.. will let you know how it goes
Update:
Got it delivered today, turns out the avenger's rear 36t sprocket holes are just a "tiny" bit misaligned so it can't fit properly but the workshop people said its possible to fit it by drilling those holes little larger (not a hard process) but i was too bored to take it somewhere else to drill so decided to stay on my stock RS 200 stock sprocket of 14T 41T (On my Bs4 NS)
I originally tired to install smaller rear sprocket to see if NS can go 60kph+ or maybe around 65kph on 1st gear using it. Seems like i have to ditch that idea for now but @Fernmeister TV you can try using it.. just have to drill couple of holes little larger and the 36t from avenger will fit proper. I hope you try that
Bro, I know the result, so Im not going to be making any more sprocket mods to my ns nor my 390, cause it's just gonna cause trouble for me in the future, my NS200 is run almost 45000kms now, and I don't want to mess stuff up by changing these sprockets again and again, I dint like the 15t itself, I'm not going to try out this 36t and spend extra for these sprockets when I don't get anything out of it.
@@FernmeisterTV its all right bro.. 36t is even higher gearing than 15t in front from my calculations but i think i need to stick with stock sprocket or RS sprocket since i dont have any roads for high speed in my crowded city. I just wanted to test it out of curiosity. Its all right i love your videos .
@@itsyoboigucci7578 thanks buddy, sticking to the stock setup is best, or the RS200 setup if u want a little bit more pickup. I prefer stock setup as I like the balance of higher cruising speed as well as good enough initial acceleration
Hornet have 15teeth
Instead of 15t front you can go for 38t sprocket of avenger 150
Fitting the rear sprocket by removing the tyre and all that is more of a pain in the ass process. Plus this was just for an experiment, I use stock setup on my bike
Hi dude what modifications I can do to increase mileage of ns200 pls reply
U cannot do any such modification boss, only thing u can do is ride more efficiently and ride below 80 while shifting gears below 5000RPM to get a good mileage. Or else there is no other way to increase mileage
@@FernmeisterTV tnks dude
Bro pickup badhegaa ki same hi rehegaa?
Coz mereko wheelie practice karna hai?
Pickup Kam ho jayega, wheelie karna Hai tho chota sprocket dalo, apache 200-4v main 13t ka sprocket Ata Hai, vo fit Karo
I want to increase the initial power not the topend for ns..What i want to do???
Change rear or front sprocket??
U can go for rs200 sprocket setup(41t rear) or u can fit 13t front sprocket
@@FernmeisterTV i think ns have 39teeth rear yeah??? RS sprocket it give more power yeahh?? Any mileage issues
@@RiCHiN_ yes correct, no mileage issues
Can I fix the same change sprocket in Hero Ignitor?
No, different brands and bikes have different specifications.
Witch bike sprocket you used for ns
It's a custom 15T 520 sprocket I got from Aliexpress, not available India
Which bike used 15 teeth sprocket
How about using the same sprocket on ns160..both are siblings right ?
Both r siblings, but the engine is different and transmission is different which is the main thing. So u cannot use a sprocket setup of some other bike. 1st plz find out ur sprocket setup and let me know then I'll tell u
Which bikes sprocket is this
Bro 220f ma install kar sakta hu
Or kiye kiya increase hoga??
Yes u can install, cruising speed our top speed increase hoga, acceleratuon 5 to 10% Kam hoga
@@FernmeisterTV matlab inisial power kam ho jaya ga
@@desivlogger3786 yes
Bro, you removed plate na. Any problem if we remove plate?
No problem, just sprocket cover will get little more dirty, nothing else
hiii.... How is the build quality of NS 200 when compared to RTR 200 ?
Way awesome than RTR
How about mailege its go increase or decrease
It remains same
Bro racing CDI in ns 200 Cause any damage to engine or bike may get any issues
Yes, reduces engine life and voids warranty of bike. It causes damage to engine when the stock limiter has been crossed, rpm goes upto 13000rpm which is not good for engine, stock limiter is at 10500rpm.
@@FernmeisterTV bro if we use 15 t sprocket it causes any damage
@@velmalrahul7857 no it does not cause any damage, but I'll tell u that if ur planning gon fitting it to ur bike, the 6th gear pull is quite bad
@@FernmeisterTV bro if we use mantra racing air fliter it goes much faster haa please make a video on it
Hay mano ...usted es una bestia para manejar ...que pecao como le llora esa moto .....venda la mejor ...
Nice video bro good & All the bstt for other future videos 👌👍👍👍
Bhai is gear ko install krne se kuch speed increase hui kya , kitni ?
Yes 5+ kmph in each gear has increased
What if I use driver sprocket with more teeth does increases high end top speed or just increases speed at lower time... My question is it's help for TOP SPEED INCREASES or just INCREASE GEAR SPEED BY +5? PLEASE REPLY ASAP
It will increase every gear top speed by about 4 to 5kmph, plus top speed will also be higher by about 10 to 14kmph
Bro ..kit kit sound from sprocket how can I remove that? Any idea
That kit kit sound usually comes from chain, it happens and is normal for pulsars, chain gets uneven wear
No its not common in NS.You just need to replace the chain guide along with new chain replacement.
Is there any lower teeth rear sprocket that fits for ns available
Na, 39teeth is the lowest available for ns200 which is the stock sprocket of NS200.
Did you see any improvements in highway cruising speed...?
Yes, with 14t sprocket I would be cruising at 100kmph @7k rpm in 6th gear. With 15t sprocket I can cruise at 110kmph @7k rpm in 6th gear. But the pickup in 6th gear with 15t sprocket is bad. Hence u use stock setup only
Bro 1st, 2nd , 3rd gear pe picup kesa raha matalab increase or decrease??????
All gear pickup decrease
Thank you for the information and well furnished.
The shipping cost is at 2k and the cost of the sprocket itself is some 250 rupees hence seems unreasonable.
If your currently not using the 15T sprocket can I buy it from you .
Hey sorry man, sprocket is being used by my friend currently, and won't be for sale
@@FernmeisterTV no worries..
If you have any idea of what would fit my Avenger 220 from 14 to 15 sprocket do let me know.
Cheers
Bro agr ham RS 200 mai front sprocket chnge kry toh speed increase or Decrease ....nd intial pickup increase or Decrease
If u put bigger sprocket in front top speed will increase, but acceleration will decrease little bit, not big difference
Price
Bro another doubt can we change the back spocket of ns...because the spocket of ns is very bad
Back sprocket u can change, but it is very hard to find a custom smaller sprocket than the NS200 39t sprocket.
made a custom spocket bro ..from aa shop
Bro any gear shifting broblem coming.
No such problems
Ok bro.i have rs200.bs3.and 14t 39.t.top speed 164.m8llage 42 to 45.1st gear and 2nd gear is slightly hard.another is shifting easy.what broblem I don't know.blz give idea.
Bhai which app did you use on the phone? And has it to be connected with the bike wirelessly ?
GPS app I've used play.google.com/store/apps/details?id=com.fragileheart.gpsspeedometer
You cannot possibly connect it to your bike bro
From Bangladesh, can i try it on tvs apache 150.really it will increase milage.thanks bro.
Is that 520 pitch?? or 428???
520
Aapne kaha se purchase Kiya
Bhai ns 125 me change krr skte hai n
Sabka different hota hai bhai, u will have to check ur sprockets and see what fits
What is ur ns200 rear sprocket size front is 15 rear is what
Rear is stock 39T
Hey buddy i would like to know the tyre SIZE AND TYPE for front and rear . Also does upgrading to 15t sprocket increase acceleration and perf?
Currently using front 100/80 17 and rear 130/70 17 Tyres. Both r same PIRELLI ANGEL CT. And no, upgrading to 15t sprocket does not increase your performance, it actually decreases the acceleration a little bit. Performance in 6th gear is kinda poor after installing 15t sprocket. This video was just for an experiment
@@FernmeisterTV thanka . The rear tyre looks like diblo rosso 2
@@shanonsequeira4499 this video is old, after this tyre I fitted the pirelli angel CT. Diablo rosso 2 is a very good tyre, but for track use or for Superbikes. It wears out very soon compared to other Tyres. I have now completed 31000kms. At 29000kms I had changed the Diablo rosso 2 which lasted only 12k kms with normal highway riding
@@FernmeisterTV oh okay . Thanks mate. I am gonna get my pulsar 200ns soon and was not sure about which tyres to go with . I was thinking of size increase to 110 and 150 but didn't want to loose performance.my first preference was apollo alpha h1 130 rear but looks like we don't get it in that size so i am gonna stick with mrf zappers 130 and my b 110 in the front.
Whats the size of you rear sprocket?
Stock 39t
Stock 39t
Can we use ns 200 Chain sprocket to duke 200??
Yes
Which action camera you are using?..
Right now I have GoPro hero 7 black
@@FernmeisterTV before gopro which camera you are using?..
Sjcam 4000 and Sjcam 8 pro
Hlw sir... can u tell me the 15t sprocket number plz sir...🙏🏻
Brother can you send me.. 15t spocket for ns200 i will send u double money... this spocket is very important for me
I don't have bro, and Aliexpress is banned so not possible
if I install 15t sprocket in my rs200, then acceleration will be down??
nd what about mileage? does it affect the mileage?
Acceleration will reduce slightly, u won't notice a huge difference unless u r drag racing, and top speed will increase by at least 10 to 14kmph. It does not affect mileage, u will get similar mileage, instead of fitting the 15t sprocket i suggest u to fit the ns200 sprocket setup on ur rs200, it is as good as fitting a 15t sprocket
ok ok, thnq for the concern 😊
Bhai isse bike ka pick up kam ho jata h na
Han Kam hota hai bhai, isliye Naya wala video banaya hai Maine, latest video dek le
Only front 15 T changed ...160km top speed increase???
Yes, top speed can go 160+ after actual performance mods, but after installing 15t there is power loss in 6th gear, so 155+ will only be possible on downhills, stock setup is the best
@@FernmeisterTV thanks bro😍❤
can we use in duke 200 bs6
Yes, but 15t is not available in India
The bike have lossed 20% of its acceleration
not really, focus on time taken to reach from x speed to y speed, u will notice the time taken is not less
King 🔥🔥🔥🔥🔥🔥🔥
i have a question brother. after u changed the front sprocket to 15T, are u still able to put the front sprocket cover back on?
Yes, cover will fit no matter what. Only the inner metal plate needs to be removed as shown in the video
What size is your rear sprocket???
Stock 39T
Konsi bike ka sprocket tha ye please tell me
It's a custom sprocket from China, not available in India as Aliexpress app is banned
bhai apache 200cc 4v bike ke liye koi batao plz
Apache 2004v comes with stock 13T front sprocket, I don't know if the sprocket type and Shaft dimensions r similar to pulsars, if they r same u can fit a 14t sprocket of ns200 to increase top speed. If they r not same as pulsars u ill have to search for a 14t sprocket with same Shaft dimensions as ur stock sprocket and fit
Pulsar 135ls mai konsi bike ka dalu..... Must reply
Pata nai bhai, 135ls ka sprocket alag sa hai
Vascro try kor medto tuka straight rosto btw amazing video keep it up
Yes kela already, try korun sprocket change kele 2 weekan. Thanks btw
@@FernmeisterTV amge goenkar always the best
Can I fix on my BS6 Variant
Not possible
If we change will milage get drop????
No drop, will remain same
Does it affects engine or what about acceleration
Does not affect engine, maybe 2 to 3% decrease in acceleration, not noticeable, bike will run normal
@@FernmeisterTV how much it's cost
Between 350 to 500 rupees
@@FernmeisterTV from where u have buyed Online or Offline stores ??
@@kashinathpednekar2825 online, Aliexpress app
Can we install 15T in Ns160 Bs6 ?
I think NS160 already comes with 15T front sprocket, plz check it cause I also don't know
@@FernmeisterTV sure i will check ! 😀
Bs6 Ns200 6th gear top speed 112 give me the one solution
Just sale ur bike and buy 39t you will go 112 + on 6th gear 🙂
Bro we can use for RS 200 bs4
Yes definitely. But i would suggest you to fit the NS200 14T-39T sprocket setup for your RS200
Loved your effort.. please suggest a rear sprocket for rs 200 also... I want more top speed
Put the NS200 sprocket setup on ur RS200, 39t rear. I have touched 160 with this 15t sprocket, check the video ruclips.net/video/sYI3G1TJ9yA/видео.html
What if I put 16 t sprocket on my bs3 rs200.& 39t sprocket in rear side, will it be possible to get more than 180 km/h on long stretch of road like express way.
@@SHUBHAMSINGH-ds6ql you should try
I absolutely do not recommend this as it will spoil your bikes engine and transmission. The only change u can safely make is 15t front OR a 39t rear sprocket. Do not go beyond this as it will spoil your bike. 1st of all this bike does not have the power nor is it designed to go above 170kmph. @SHUBHAM SINGH
Can you try 12T + 47T for ns200
No not possible, not doing anymore sprocketing cause it's affecting my bikes performance
BRO WHICH BIKE SPROCKET IS THIS
PLS TELL ME
It's not of any particular bike. It's a custom sprocket, not available in India, I had bought it from Aliexpress before Aliexpress got banned