2002-2006 LEXUS ES300 ES330 TOYOTA CAMRY KNOCK SENSOR REPLACED
HTML-код
- Опубликовано: 12 окт 2014
- PLEASE LIKE THIS VIDEO! THANK YOU IN ADVANCE.
THIS VIDEO IS PURELY FOR EDUCATIONAL PURPOSES ONLY. I MADE THIS VIDEO TO SAVE YOU MONEY AND TO PROTECT YOU FROM THE STEALERSHIP AND THEIR OUTRAGEOUS REPAIR COSTS. IN THIS VIDEO I WILL SHOW YOU HOW TO CHANGE THE KNOCK SENSOR WIRE HARNESS AND THE, "DREADED KNOCK SENSORS." I WILL ALSO GO OVER HOW TO CHANGE THE VERY HARD TO GET TO AIR FUEL RATIO SENSOR BANK 2 SENSOR 2. THIS VIDEO IS VERY HELPFUL WITH MANY OTHER REPAIRS AS WELL, SUCH AS CHANGING YOUR SPARK PLUGS AND COILS, AIR FILTER, MASS AIR FLOW SENSOR (MAF), AND A FEW OTHER THINGS. I AM IN NO WAY A MASTER MECHANIC, BUT I REFUSE TO PAY BOGUS MECHANICS CRAZY AMOUNTS OF MONEY FOR JOBS THAT ANY SMART, MECHANICALLY INCLINED PERSON CAN DO. THIS PARTICULAR JOB WOULD HAVE COST ME $350 FOR EACH KNOCK SENSOR, $95 FOR THE WIRE HARNESS, AND 5 HOURS OF LABOR @ $135 PER HOUR ACCORDING TO THE STEALERSHIP. YOU DO THE MATH!
PLEASE LIKE THIS VIDEO! THANK YOU IN ADVANCE.
Thanks just changed on my 02 Es300 190,000 miles runs like a charm!l
Absolutely correct on the A/F ratio sensor being a different component than O2 sensor! Bravo
Just wanted to say this video is awesome. I had to change my coolant bypass hose. And this video is clutch af bc that’s literally the last hose you undid before your knock censors. Thank man video gives you the run down on changing half of anything I’ve replaced
Thank you so much very well made I am a graduate mechanic and you explain it very simple and to the point you should do this for a living
Dam, that looks like a nightmare, your really good mechanic bro, I’m glad I found your video , it will help me out huge
The BEST VIDEO. Thank you sir!!! I am going to change out the spark plugs for my son's 2004 ES330 this weekend (He also help me). Your video is so helpful to us. Thanks again🙏
Excellent detailed description and good camera angle. I really needed this level of explanation. Thank you!
Pulling the top of the air box is a great time to examine your MAF sensor for buildup
I would also add to consider replacing the radiator hoses while you’re way deep in there... thank you for sharing, I have a Highlander with 298000 mls thats gonna need the sensors replaced....you shown me the way 👏👏👏😎🌺🌈🤙🏽
CRIS THANKS FOR SHARING YOUR KNOWLEDGE.
Great video he gets to the point he shows you what to do and thats all anybody wants
Chris I like your take on the bank one sensor you got with the plenum off. I did it from under the car and it was the hardest/tightened thing I have every done to a car!!
A GREAT BIG THANKS. Now I know what my mechanic didn't do.
Awesome video and great explanation man! Thanks for the extra add in on the o2 and fuel sensor, I'm gonna tackle my first knock sensors myself this week. Looks fun and time consuming Haha.
Just wanted to say thanks! Saved me a ton of money 🤙
I want to thank Chris again I helped my buddy do this and probably saved him 1 thousand dollars. I would highly recommend however that you find the proper torque specs for the manifold bolts.Drain some of the coolant so you do not get any into the cylinders . Use a vacuum cleaner to clean up all the dirt to keep it out of the cylinders. and finally yes change both sensors( they are identical and have the same life expectancy) and the wiring harness and the air/fuel sensor because you don't want to do this again . The older the car is the more fragile /brittle the wiring harnesses /hoses/ plastic pcs. become and you should pay close attention to these as you put everything back together because just disturbing them can be enough to cause them to fail and you do want the car to start after all this.
i was gonna buy a 02 camry with bad knock sensors but after this very helpful video i dont think so , its too much work.but thank you for the video
Great video!
This helped me so much. Thank you!!
OMG! No wonder my mechanic hasn't called me back yet. Told him code is reading knock sensor. smh. Thanks for the video.