Building High Performance Smoke Devices | Volume 2: Time Delay Pull Rings
HTML-код
- Опубликовано: 20 июн 2024
- A comprehensive guide to building extremely accurate time-delay pull ring fuses for your own tactical smoke grenades. These devices are legal-to-possess federally, however, know your state and local laws and follow them please.
Click here to view more similar content and subscribe: / @inventionincarnate
There are two main objectives of this particular series. The first is to build from scratch the ultimate handheld smoke device because it's cool af. The second, and more important, is training. In the event of a lawless zombie apocalypse, or the more likely, long-term/permanant SHTF scenario, through this legal process, you will inevitably pick up the knowledge, skill, and experience to MacGuyver shit that could save your life when the hoards of lib...-imean, marauders come after Week 1. Also, hopefully, looters haven't targeted garden/aquarium supply stores by day 9. Do not do anything stupid and follow all federal, state, and local laws.
________________________________________________________________________________________
This video is Volume 2 of a three-volume series and focuses primarily on the building of a time-dead lignition system and how to make, integrate, and use it.
Volume I:
Part 1: Raw Chemistry (From Scratch)
Part 2: Building the Igniters (this part also serves as the instructions for the igniter kit I have for sale at InventionIncarnate.com)
Part 3: How to integrate the igniters into legal smoke devices
Volume 2 (this video): How to make extremely accurate time delay fuses
Volume 3: Putting it all together and creating the ultimate screen obscuration device using TPA (Terepthalic Acid) for lowest toxicity and lingering.
If you've perused my channel you can clearly see that I love smoke devices and subsequently have seen a lot of them. I'm telling you that I've never seen anything compare to the TPA device that is the final product of this video series. It puts my first smoke video: DIY High Performance Smoke Grenade to absolute shame. Like put my hands over my face, look down and briskly walk away shame.
**If you DON'T feel like doing chemistry:
I sell a 50 count pull-ignition kit for $40 TOTAL (free shipping, with fuels and oxidizers separated to avoid HAZ-MAT Shipping ) on my website www.InventionIncarnate.com all profit goes towards my channel. And yes it's via Venmo because I'm not paying 6% credit card fees when my total profit per kit is $7. I live in a van down by the river, just trust me.
A similar Igniter kit with 100 count can be purchased for APPROX $79.27 ($49.99 PLUS insane HAZ-MAT Shipping) at Skylighter.com, however, they are constantly sold out.
____________________________________________________________________________________
**If you DO feel like doing chemistry (or want to steal my invention that I stole fair and square from someone else) here's the formula:
To make approx 100 of these igniters you will want a total dry mass of 14g for the powdered ignition mixture, and a total dry mass of approx. 3g for the powdered striker mixture. All ingredients should be fine powders before mixing.
TEST 2-3 OF THESE IGNITERS AT A TIME BEFORE MAKING THE WHOLE BATCH. I'D RECOMMEND NOT ADDING ALL OF THE POTASSIUM CHLORATE AT ONCE BECAUSE YOU WANT TO KEEP THE IGNITION REACTION MILD-MODERATE NOT CRAZY. FILL CUPS TO 40% DO NOT OVER-FILL. I LIKE TO USE A CHEAP PAINTBRUSH TO JUST BRUSH THE CUPS. IF the igniters aren't working, it is because they aren't dry.
The Ignition Mixture Ratio:
Potassium Chlorate: 56.2%
Antimony Trisulfide: 24.6%
Sulfer: 9%
Ground Glass: 10.2%
Magnesium Carbonate: Add 1% of whatever total mass you mix
The Striker Mixture Ratio:
Red Phosphorus: 33%
Ground Glass: 33%
Sulfer: 33%
Add clear PVA glue (Elmers school glue) to the respective consistencies:
Ignition Mixture: Just thicker than pancake batter.
Striker Mixture: Just thinner than pancake batter.
Please leave comment on your experience, for the algorithm and my feedback
Skylighter.com sent me the Antimony Trisulfide and 1/4" Chinese time fuse for these videos.
Here's the link for the 1/4" Chinese Time Fuse: www.skylighter.com/products/c...
Here's link for Antimony Trisulfide: www.skylighter.com/products/a...
Here's link for Potassium Chlorate: www.skylighter.com/products/p...
If you're still reading this then Like, Subscribe, and Share this video because that's the only way this stupid algorithm grows my channel, and it makes me feel cool and popular.
00:00 Intro
01:02 Always Test Your Time Fuse
05:40 The Build
13:50 Testing the Time Delay Assembly
14:03 Assembly and Integration Into a Device
34:50 Testing
#diy#airsoft #paintball #smokebombs #smokegrenade #fireworks #homemade #survival #chemistry #pyro - Хобби
Brother your kit is amazing! 40 bucks was a steal. Thanks for everything!!
Great video. I've been doing pyro/fireworks and rockets for years and I still learned a lot from you!
One thing you can use rather than glue in places is NC lacquer or nc lacquer mixed with fine black powder. Paint it on where you want glue and easy ignition.
Maybe a roll or two of water activated tape to attach and seal things from time to time.
These tutorials are excellent. You did a wonderful job on them. Thanks!
Another,DIY masterpiece.
This work on smokes ,Is very important to the community.
keep up the hard work, 💪
If your in the south east come on out to our monthly events
Your videos are awesome, please keep them going 🤙
Dude this channel is epic. That red smoke is very nice
Dude I just got my kit and I'm stoked to try it, thanks!
Hell yeah!
Seller is good to go! Ordered pull string kit late last week and received yesterday afternoon!
This is awesome!!
Nice, I’ve got to get some time fuse. Much more precise than visco.
You can also get a spring that has a large diameter wire and cut them for your ring pulls. Used to work in a spring shop and that's how you get your key rings
yep, just get whatever length is most cost-effective from McMaster Carr and cut as needed
You the man😊
There is a formula for a gasless combustion it uses tungsten powder and potassium dichromate I believe. I can look it up for you if you want. It's the same stuff they use in military grenades. It prevents the gases from going down into the Detonator and setting it off prematurely which would really suck for the person holding the grenade period LOL
Yess. A goldshmidt reaction delay would be the most professional/reliable version, and can even work under water. But ordering the specific chemicals involved seems a bit sketch
Woah, just saw this! Go on…
Any time I see anything with "chromate" in it I think (a) yay pretty colors! (b) oof cancer and (c) g'luck sourcing it
Have you checked out any of the US Army Technical Manuals which relate to this such as: "TM 31-210" circa 1969
No, but I am now!
If you look around online you can find training grenade fuses that are used as surplus. I’ve always thought that reloading those with a primer and some time fuse, or even 3d printing a similar assembly would be pretty awesome for smoke devices.
I would recommend buying a couple as templates to make your own. A lot of the ones you get on the market these days are pretty sketchy quality.
rumble.com/v4wquq8-a-reusable-m228-fuze-for-airsoft-and-paintball.html
@@timturner7609 The fuses I’m referring to are fired military surplus that can be reloaded. I wouldn’t recommend that route to many people but Invention Incarnate clearly has the skills to do it. The cool thing about doing it yourself is you can either use your own length of time fuse or visco with packing around it. This way you can be absolutely sure about the delay, none of the 3-5 seconds crap.
I am certain there is a joke about being "knotty" as a child there somewhere
"Our desired length is 3 inches..."
Yes I still have occasional teenage boy moments 😆
Brand or type of glue for your primer mixture? I'm not having luck with 50/50 Potass Nitrate and sugar. Just kind of gums up and doesn't dry.
I believe The 50/50 potassium nitrate/ sugar has to be used dry without a binder. But for the record I use Elmer’s Clear School glue (slow dry) or 12% nitrocellulose lacquer (fast dry)
What’s you’re recipe for the smoke mix, last time I used kclo3 base mix with red dye it was really washed out and was a light red color
Potassium chlorATE
Hay bud where did you get your. 25 dia fuse ? Thanks
Skylighter, but I just ordered some yesterday from pyrocreations. Skylighter’s shipping is twice as much.
What mesh of Antimony trisulfide are you using?
Shoot, I would’ve replied sooner if I’d seen this, it’s 200 Mesh Chinese needle
All good, you’re busy putting out videos.
Don't hold me to this but I believe you can find us under Wikipedia gasless combustion. It should give you the quantities.
On it.
If you are going to Skylighter for materials, ( fuses) they are running out fast and all of a sudden charging stupid amounts for shipping.
Dude, they’re charging like 30 bucks to ship 20ft of fuse. You’re right
Volume 3? Where? 😶🌫️
On its way soon! I’m still experimenting with ideal design
Ok
dude wanna hang and have some beers ? subbed