As far as the drooling from kitty, that is love drool. Many cats that are in love with their owners drool with great affection. 🐈 Love the idea of the walking stick flute! ❤
My walking stick flute that i made, i made it so you also got a drone flute going into the other side. Everything i made was possible because of your video. You really inspired me. I am 26 made 3 flute already. My wife hates when i practice using them haha.
I just moved to Central America. I see a lot of bamboo growing here, and would like to make a walking stick flute. Is there any difference to using dried bamboo or green bamboo? I have made a flute using sumac.
While watching this video i noticed a bit of struggle you had using the sandpaper and dowel rod. I make river cane blowguns sometimes. I use a bit called a step bit or unibit and get them at harbor freight. Find a piece of pipe the bit shaft will fit a little tight and hammer it in. Cut the pipe the length you want and thread the inside of the other end about an inch. Locktight in a 2 or 3 inch bolt in the threaded end and cut off the bolt head... Then just chuck it in a drill and sand afterwards. That might help you.
@ivancrews4361 Hey my friend, that's a great suggestion! I have one of those bits in the shop and use it on an occasion however in this particular case I usually drill the inside out or knock it out with a shaft as I mentioned. Forever, that has been the easiest way for me. I would definitely try your suggestion.
I may have missed it but what is the purpose of the big hole at the bottom? I’m assuming it is the bottom of the flute or flute bottom… I need one of these!
@MelodyMccord-p6d Thanks for posting this melody! I wish I would have mentioned it during the video! 😊 I have mentioned it in other videos and have a specific video on it. I do try to remember to answer these kind of questions for others who may not have seen those videos yet. Thanks for reminding me and for watching! It is a tuning hole, please check out the video: ruclips.net/video/2ShkQnaUU4g/видео.html
I love your flutes.
I love hearing them without all the effects
@scottvarley3823 There certainly are some good natural settings for good acoustics!
As far as the drooling from kitty, that is love drool. Many cats that are in love with their owners drool with great affection. 🐈
Love the idea of the walking stick flute! ❤
@@jeannemyers489 🤔😁❤️
one day I need to have on like this :)
@ArminHirmer No, the one I'm going to bring you is "Heavier-Duty"!
My walking stick flute that i made, i made it so you also got a drone flute going into the other side. Everything i made was possible because of your video. You really inspired me. I am 26 made 3 flute already.
My wife hates when i practice using them haha.
Kool video, Charlie.
@nathanwallacefineart There are a few new interesting in ones coming out very soon!
Thank you
I just moved to Central America. I see a lot of bamboo growing here, and would like to make a walking stick flute. Is there any difference to using dried bamboo or green bamboo? I have made a flute using sumac.
@@TiminNicaragua I do have a video on drying green bamboo.
It's awesome, but how do you determine the size of fundamental note tuning hole
@@johnnykelsey4349 Via the book I wrote on the subject and 38+ years of experimentation!
While watching this video i noticed a bit of struggle you had using the sandpaper and dowel rod. I make river cane blowguns sometimes. I use a bit called a step bit or unibit and get them at harbor freight. Find a piece of pipe the bit shaft will fit a little tight and hammer it in. Cut the pipe the length you want and thread the inside of the other end about an inch. Locktight in a 2 or 3 inch bolt in the threaded end and cut off the bolt head... Then just chuck it in a drill and sand afterwards. That might help you.
@ivancrews4361 Hey my friend, that's a great suggestion! I have one of those bits in the shop and use it on an occasion however in this particular case I usually drill the inside out or knock it out with a shaft as I mentioned. Forever, that has been the easiest way for me. I would definitely try your suggestion.
I may have missed it but what is the purpose of the big hole at the bottom? I’m assuming it is the bottom of the flute or flute bottom… I need one of these!
@MelodyMccord-p6d Thanks for posting this melody! I wish I would have mentioned it during the video! 😊 I have mentioned it in other videos and have a specific video on it. I do try to remember to answer these kind of questions for others who may not have seen those videos yet. Thanks for reminding me and for watching! It is a tuning hole, please check out the video: ruclips.net/video/2ShkQnaUU4g/видео.html
you should get a apprentice to pass on your skills
Amazing
You may have mentioned it, but I missed it. In what key did the flute end up?
@@WeberBaker "E". I think I may have said that's what I had hoped it would be, but I don't remember if I ever confirmed or not. 😂
Subtitles in italian please 🙏🙏🙏
@@DarioAspesaniOfficial Presto arriverà un servizio di RUclips che tradurrà ciò che parlo in diverse lingue!
@BlueBearFlutes i see the subtitles in different languages on this video. But I don't find italian. 😀
@DarioAspesaniOfficial I have not tried subtitles yet. However, they will be using AI to translate into other spoken languages soon.