Mazda Rx8 Lightweight Pulley Kit Install | Rx8 Belt Replacement
HTML-код
- Опубликовано: 12 сен 2024
- A step by step video on how to install pulleys on a Mazda rx8. Only for 2003-2008 RX-8.
🇺🇸 USA & ASIA:
🟠RED PULLEYS: ebay.us/O7rdBy
🟠BLUE PULLEYS: ebay.us/KGwDSY
🟠SILVER PULLEYS: ebay.us/uzsZ4N
🟠ELECTRIC IMPACT GUN: amzn.to/3W3outg
🟠24mm IMPACT SOCKET: amzn.to/3srrhiu
🇪🇺 EUROPE:
🟠RED PULLEYS: ebay.us/O7rdBy
🟠BLUE PULLEYS: ebay.us/KGwDSY
🟠SILVER PULLEYS: ebay.us/uzsZ4N
🟠ELECTRIC IMPACT GUN: amzn.to/3TTaeBM
🟠24mm IMPACT SOCKET: amzn.to/3WcL6b8
🇬🇧 UK
🟠RED PULLEYS: ebay.us/O7rdBy
🟠BLUE PULLEYS: ebay.us/KGwDSY
🟠SILVER PULLEYS: ebay.us/uzsZ4N
🟠ELECTRIC IMPACT GUN: amzn.to/3f8nFPy
🟠24mm IMPACT SOCKET: amzn.to/3gFXvEe
AIR BOX REMOVAL VIDEO: • Essex Rotary Quick Vid...
🟢My Website: www.drivenbyma...
⚫️Tiktok: / dbmadness1
----------------------------------------------------------------------------------------------------------------------------------------------------------------
Links in the video description or comments might sometimes be affiliate links, which means I could earn a small commission if you decide to make a purchase through those links. This commission comes at no additional cost to you, and it helps support the channel and allows me to continue creating awesome content for you.
Please know that I only recommend products or services that I personally use and genuinely believe will bring value to you. Your support through clicking on these links is greatly appreciated and helps me keep the lights on around here!
---------------------------------------------------------------------------------------------------------------------------------------------------------------
Due to factors beyond the control of DrivenByMadness, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. DrivenByMadness assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. DrivenByMadness recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of DrivenByMadness, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not DrivenByMadness. By clicking on the provided links in the description or comments, you are opening an affiliate link to Ebay or Amazon. By purchasing an item trough my link i receive a small commission at no additional cost to you.
If you want to check out the items mentioned in the video, they are linked below:
🇺🇸 USA & ASIA:
🟠RED PULLEYS: ebay.us/O7rdBy
🟠BLUE PULLEYS: ebay.us/KGwDSY
🟠SILVER PULLEYS: ebay.us/uzsZ4N
🟠ELECTRIC IMPACT GUN: amzn.to/3W3outg
🟠24mm IMPACT SOCKET: amzn.to/3srrhiu
🇪🇺 EUROPE:
🟠RED PULLEYS: ebay.us/O7rdBy
🟠BLUE PULLEYS: ebay.us/KGwDSY
🟠SILVER PULLEYS: ebay.us/uzsZ4N
🟠ELECTRIC IMPACT GUN: amzn.to/3TTaeBM
🟠24mm IMPACT SOCKET: amzn.to/3WcL6b8
🇬🇧 UK
🟠RED PULLEYS: ebay.us/O7rdBy
🟠BLUE PULLEYS: ebay.us/KGwDSY
🟠SILVER PULLEYS: ebay.us/uzsZ4N
🟠ELECTRIC IMPACT GUN: amzn.to/3f8nFPy
🟠24mm IMPACT SOCKET: amzn.to/3gFXvEe
Recently purchased an rx8 I have wanted one since I could remember. Found your videos and I really enjoy them. Had to subscribe!
Thank goodness you made a video for the belts, mine has been squeaking and I can replace it properly
Then the timing could've not been more perfect :D
Nice Video dude, so glad you love these new pulleys. awesome tutorial man. its saving us a job.
Thanks !
To the point and simple explanation!
You the man
Your 8 is looking better and better every day mate!
These pulleys are awesome!
Man, you're killing it!💪💪💪 good job
Thank you so much bro!!! 💪😃
Awesome video! This was one of those mods I always wanted to do but I was just too afraid to mess with the alternator and belts lol
Really good tutorials. Glad i found your channel.
Thanks man :)
Finallyyy :D
Was waiting for this video :)
Btw a za take komponente v motorju bi blo kul ce mas torquewrench al zadosca da po obcutku zategujes? + a mas kjerkol zapisano s kaksnim navorom more bit zategnjeno?
Si sploh pogledal video? Tam sem vse razložl in pokazal ;) Drugače je priporočeno z torque wrench 14-18nm navora. Lahko tudi po občutku z drugo zadevo, samo da ne pretiravaš.
Driven by madness Sori, ocitno sem prevec povrsno pogledu 🙄. Kje pa najdes te podatke kok morajo/so lahko doloceni vijaki/matice pricvrscene?
hahah ni panike :D Servisna knjiga. Ali pogooglaš in najdeš v kakšnem forumu. V skrajnem primeru, če ti je nujno in ne najdeš nikjer vprašaš mehanika ki je specializiran za wankel motorje 😊
Good mod for NA builds that are increasing the Rev limiter. Prevents over spinning/working the alternator. I'm working on a 10k tune to put on after I make a few more upgrades. Currently at 9400 Rev limit.
Just leave the belt on the loosen the bolts but don't take the pulleys off, much easier
That looks awesome!
Thanks man!
what belts fit these pulleys ?
Yeah I just ordered that kit and it doesn't come with belts so I'm looking for them
Good job man but you really need a pop filter for the microphone.
Thanks man! I have the pop filter, but i need to find it, since i have't used it in years. I've noticed the pops in this video when editing the audio, and it reminded me of it. Thanks for the feedback :)
Why wont the stock belts work???
Hey man love your vids but I notice that you put a washer on the wrong side ( yeah I know that maybe it's not so obvious), so the washer has a small bent so it will push the bolt and make some tension between the surface (maybe it just looks on vid that this washer is bent if not my whole comment can be ignored :)).
Hey! Thanks man :)
As far as I remember the washers were flat on both sides (if I remember correctly). Thanks for the feedback tho, will keep that in mind for future vids 😊
Nice vid like always!
You've got a little bit of cracking on your vacuum hoses. It might be a good idea to replace those man! Summit racing has some cheap red silicone ones that would look sick in your car. I found a link just in case
www.summitracing.com/parts/trd-5778
Thing is installing a smaller alternator pulley will slightly decrease the life of the alternator, only reason I haven't done a pulley kit yet
Your engine seems to still be going fine even with the low compression?
Nice work ;)
Thanks :)
These pulley kits do not come with belts. I just received mine and now I need to order the belts. Where can I get them
I have to ask would a Gilmer Pully kit work the same or was this just the brand that you preferred I still have my old kit from my RX7.
I'm trying to get that kit but it keeps saying it's sold out
Hey I have a question 😖
Do the electric impact gun feel cheap ? i might consider buying the same one
Tart0p0mme not at all. Its pretty solid and heavy. I had 2 CMI tools, and one is 8 year old and working, and the other 4 years old and working. I think that for the money this impact gun is perfect 👌
Is there any issues moving crank Alignment issues later cheer 22/01/2022🇭🇲🇬🇷💯
So far, no issues at all. Everything runs smoothly
Does it making belt noise after you installed this pulley kit?
No, none.
Did you feel any difference in how it revs after?
Can't remember, but i think the difference was minimal.
@@Drivenbymadness thank you for replying to my questions unlike the other channels 👍.. you still have your 8?
Can you please tell the sizes on both of those belts I bought the pulleys and they came with no belts and now don’t know where and what size to buy.?
Did you buy the same pulleys as i had in the video and video description? If you did, then you should've got the belt with the kit. If you bought something different from another site, then i can't help you here much, but you can contact Essex Rotary and ask them to send you the correct belt for what you bought: sales@essexrotary.co.uk :)
Thank you
@@DrivenbymadnessI bought the exact one on the link. They don't come with belts. I'm trying to find a belt myself
Has your car ever went into limp mode? My 06 rx8 went into limp mode with a CEL a few days ago and I checked the engine light for codes and nothing came up ☹️ lol
Dboy_47 nope :/ but I think there is a topic on rx8 club.com on how to diagnose and solve it. Just google rx8 limp bode
Driven by madness yeah first thing it told me was to make sure my omp sensor was clean and CEL and limp mode is still on afterwards 🙃 there are times where the light and limp mode turn off and then the car will run perfectly fine, but then it’ll go back to limp mode most of the time it’s so annoying lol
Driven by madness turns out my problem was the omp pump, ended up buying a salvaged one online for about 100$ now my car works fine 😁 any tips on how to maintain that or do they just need to be replaced after a while ?
how many horsepower do I get with this kit ???
I'm guessing about 5. And I base this on absolutely nothing.
The Unorthodox Racing pulley set claims 4 to 5 on thier website.
Within the margin for error of any good dyno (+/- 1%)...so it's basically worthless, aside from looks. Also, with underdrive pulleys you risk the alternator not charging the battery enough and the water pump not pushing enough water though the system (the cavitation claims from the website are called "marketing tactics").
If I were to buy these at all, it'd be in stock weight and drive ratios, because it's just not worth it. This car CAN (I didn't say DOES) have enough problems that we shouldn't be adding to it for a tiny bump on the butt dyno.
We do not claim a horsepower gain with the installation of our pulley kits, as any power increase they "may or may not" offer is within the variance of back to back dyno runs anyway. as mentioned above.
However it is worth noting these are substantially lighter than stock pulleys.
the link doesn't work no more
Where can I purchase one of these kits
You can check on my website: www.drivenbymadness.eu/parts-usa-europe-selection
“Take it out”
1st!❤️
How do I purchase this!?
Ronald Watkins there are links in the description of the video :)
wait a minute rx8s dont have a crankshaft they have an eccentric shaft
Am I having deja vu's lately?
Little tip: Put the old belt on the pulleys to stop them from spinning.
Also, I still want green :(
Last