AMAZON Sand Blaster Review
HTML-код
- Опубликовано: 4 сен 2022
- Amazon sandblaster review and testing. Amazon tools better than Harbor Freight tools? Lematic sand blasting tool. This is a gravity and siphon feed abrasive media blaster. Air tool testing. Rust removal tools. How to remove rust. Handheld pneumatic media blaster. TOOLS BELOW:
Tools Used:
Sand Blaster: amzn.to/3cJiSCN
High-Flow Fittings: amzn.to/2J0PofR
Tools & Supplies:
60 Gallon Air Compressor: amzn.to/3KNhR9h
80 Gallon Air Compressor: amzn.to/3ectJFG
Siphon Blaster: amzn.to/3wUcf7E
Fine Blast Media: amzn.to/3qj2FqY
As an Amazon Associate I earn from qualifying purchases.
#amazon #tools #restoration 
Авто/Мото
Tools Reviewed:
Sand Blaster: amzn.to/3cJiSCN
High-Flow Fittings: amzn.to/2J0PofR
Tools & Supplies:
60 Gallon Air Compressor: amzn.to/3KNhR9h
80 Gallon Air Compressor: amzn.to/3ectJFG
Siphon Blaster: amzn.to/3wUcf7E
Fine Blast Media: amzn.to/3qj2FqY
As an amazon associate I earn from qualifying purchases.
You shouldnt be allowed to use tools.
Yáll think that thing will work on my old ladies old rusty pipes too?
Well this video is 11 months old now you should be about 1/2 way through that trailer by now.
😂
😂😂😂
LOOOOOL omd
😂😂😂
Probably a good idea to hold the gun horizontally so the media can actually flow properly
that's what i was going to suggest ..
Need to be up right gravity fed
You should always an approved respirator when sandblasting.
Yea!
I have a home made sand blaster made with a pop bottle and harbor freight blow gun, I use mason sand and mine works fine.
Totally agree big air compressor and small beads.
That's a gravity fed system you need to have that gun upright at all times
That one can work as either a gravity feed or a siphon feed. You can see the black siphon hose coming out of the bottom of the gun that is going into the bucket willed with the abrasive media. The red hose coming out of the bottom of the handle is the air supply.
@@toshley6192yes
Very quick and informative
I liked this full length video better. Pro tip: the closer you are to your compressor, the more consistent your pressure will be. On a high demand, constant pressure bleed tool like this, you want the shortest hose possible.
I'd also look into getting a water blaster if you are going to do large jobs like that entire trailer. They work a lot better, stay cool and don't require media that you have to buy, use once and then have a huge mess to clean up.
Thanks, I have seen the water blasters. They look really cool.
What water blaster would you suggest? Like do you mean the ductless blasting franchise or a hobbyist model?
Saw where another youtuber drilled out the hole a little bigger where the media flows thru. Worked a lot better.
It's gravity fed. Stand the wheel up & try it. You'll likely get a more even flow
Fun fact. This guy's older brother has the Forgotten Weapons channel on RUclips.
Hahaha out of 100,000's of comments someone finally sees it🤣
For real?
Awesome!
thats good video. Thank you for it
You're welcome!
Try agitating the pipe up and down that’s down in the media while sandblasting
Just found your channel and Subscribed. Very interesting. Nice video
Awesome, thank you!
Safety last🤣🤣❤ good video bro
Thanks 😅
Huge tip is add a oil/water separator from compressor to air hose. Fitting size makes zero difference at 120psi. Also if you have a big enough air compressor you can get a gun with a bigger tip to run larger abrasive materials through.
Fitting size does matter, but I doubt that is the major weak point in this scenario
Quality video
Very nice and concise
What is the blue deposit on top. The hose is not the retorn line
Oh wow
Woah!!
Maybe, just maybe, put that blast media inside the plastic hopper
Which media do you recommend from harbor freight?
Baking soda: fine blasting finish
Walnut: fine blasting
Coal slag: cheapest, not very reusable
Aluminum oxide: reusable and very abrasive
Glass beads: puts a texture on blasted part, reusable
It just depends on what you're doing.
@@MattsShop thanks so much!
Next time maybe read the instructions since you don't understand how gravity works, or how to use basic sandblasting tool.
😂😂
Calm down u toxic fucker
😂😂😂
So rude
@@CH-px1fw you mean factual?
I guess yhe top hopper is just for decoration 😂😂😂
😂😂😂😂 just here for the comments
Me too!
Having the gun horizontal should help
I can sandblast my oem car paint?
Possible, yes. Ideal, no. Depends on what you want to do... Lakeside Auto Body is a good channel for vehicle paint and body work.
How much
SP:6 commercial blast
Now this man understands how RUclips works! Excellent job
Haha thanks!
Long hose short undersranding of gravity.
This guys kinda funny
trailer update?
Is that rim too expensive? Why not you just buy new one?
Can you use play sand I think i'm gonna try it
NO! Play sand is dangerous. You're not supposed to breathe silica.
You should hold it horizontal; on the level.
Siphon tube
This is going to be a terrible night...
Dude really use the hopper attached to gun. You defeated the purpose by attaching a bucket to it.
I liked the siphon.
I’m new looking for info admit don’t know 💩 from Shinola 🤪
Master blasta?🤣
Jman
Well done dude you'll be done with that rim was in a week congratulations
Thanks!
Soda it's the best thing to sanding, but younhave wrong gun, everything depends form nozzle.
use the hopper instead ffs
good demo man!
Thanks!!
Was literally the shitest demo dumbest doesn't understand basic gravity
keep that gun horizontally
Silicosis any one?
Seriously, that stuff will destroy your lungs. Not breathing is a horrible way to die.
It's silica free. That's play sand that does that
Ooops and I see now that you did wear a mask. 👍🏼
toss that P.O.S. in the trash and get a pressure pot. You'll be thankful you did.
Lol pressure pots are for a totally different use. This is for small DIY jobs.
@@MattsShop they have 20lb pots for smaller jobs. I would rather have something that works vs wasting my time trying to make a Mickie mouse setup kinda work. It's your time so waste it as you like . I just would rather get the job done and move on.
It's gonna take you a year to clean one wheel.
Why not just use sand it is a sand blaster lol
Silica gets in your lungs. It's bad for you.
would not waste my money on it.
Spay rust remover and wipe off,lol
...or just use sand...duhhh!
too slow
You’ll be there for the next 10 years trying to finish that trailer with that junk. That blaster is trash.
useless tools. I prefer tranditional sander
I'm interested to see how you'll sand in that crease by any other means than media blasting.
It's rubbish
Another useless tool from Amazon
you are a very cheap worker....spending that amount of time to finalize almost nothing...
Dude, respect yourself and spend your time doing more valuable things...Life is to short.
231 years later, buried under 78 000 metric ton of sand , he finally finish sandblasting his trailer, and îm not talking about the condition of his lungs….
SSTTUUPPIDD PEOPLE
Spending Money In Expensive
Sand, I Use Free Beach Sand And
Free LimeStone Sand.
Amén.
Don't breathe it
PLAY SAND
NEVER
@@MattsShop I BEG TO DIFFER MAT. WORKS GREAT !! AND INEXPENSIVE
Don't breathe it.
@@MattsShop actually just picked up some doing a rusty 911 hood and engine cover and yes definitely wherein are respirator and doing it outside
No stim tlakem a pistoli budeš ten disk dělat celý den!!😂😂