Nintendo DS Lite DOUBLE Screen Replacement
HTML-код
- Опубликовано: 27 сен 2024
- This poor thing just needed two new screens. Annoingly I ordered all top screens so I will order another bottom screen and swap it out. Luckily the bottom screen is the easier of the two to get to.
#Nintendo #DS #TheRetroFuture
I remember replacing screens back when there were close to none tutorials on how to do it properly. It as an insane experiance back then in 2008.
Yeah I did my fat ds back in the day probably around the same time and there were only pictures to go off of 😅
I used to buy broken DS bulks and try to repair them or make one or two fully functional again, is quite a challenging yet pleasant hobby I'd love to try again
Did you make money doing that?
Man, I had zero experience doing this, but it was so pleasant to make a fully working DS Lite with an AliExpress case and two DS halves :D
@@Nnif_Boots47 I did! very little to be honest, I didn't had all the tools nor a budget to keep going, but as a hobby it was fun
@@xavalintm watching it turning on after everything is so exciting, isn't it?
I know the pain of replacing that top screen. I originally just wanted to switch my old DS Lite into a new clear case but I ended up mangling the top screen's ribbon cable. I decided to just order a new top screen and replace the whole thing, being a lot more careful from then on.
Same thing with me, but the touch screen STILL won't work
Sometimes it's easy, sometimes it's fiddly. I've done couple of these replacements. I even mixed white and rose cases into two tone console. I recommend this.
You gave me the confidence a long time ago to start buying consoles and fixing them up. Started off with ds/3ds consoles now I'm doing board level repairs and modding everything under the sun! Thanks for your awesome vids
It never gets old.
Easy way to center the digitizer is to just insert the digitizer into the shell first and then place the screen over it. The shell will help perfectly align the screen to the digitizer.
Getting the antenna wire for the wifi board under the cartridge slot is one of those 5 seconds or 5 hours jobs. To help, I highly recommend getting some dental floss, make a loop at one end, and use it as a lead for the wifi antenna wire. Highly, highly recommend it, especially if you have many DS lites to fix
A good tip is to just wiggle it unforcefully through, if you know where it's flat point is, you can wiggle the wire slightly side to side, twisting just a lil bit each way and it goes right through. A bit of finesse more than anything
I love your simple repair and upgrade videos the best. Thanks for the great watch!
Your impression of a pigeon giving birth is impressive 😂
Going to use your video soon… IM EXCITED
To Daunting for my unusable brain 🙏🏽this was a much awaited video for some
I came for the ds lite breakdown, I thumbed the video up for the mother pigeon impression.
Always cool to see a restoration/repair video
One thing you can do to save a little money in the future is to leave the console on the Home Screen max brightness which will get rid of the yellowing. Also you don’t need to put the ribbon cables through the metal right first, once you get the back off you can do it at the same time you put the ribbon cable through the shell
nice timing dude, i was just about to fix my girlfriends ds lite but don't know how to, both of the screens are toast and this is very helpful. great job man.👌🏼
You made swapping the digitiser look so easy that I decided to replace the broken digitiser on my NDSlite with a new one that I bought a long time ago but was not brave enough to try......now have a working digitiser but a very blotchy looking screen😢
There was a YT channel called Super mod chips that first showed how to replace parts for the DS lites. I don't think they're in business anymore, but the vids might still be up. They're low resolution tho. I've been wanting someone to make new videos in higher quality on how to fix these beautiful machines
I had so much fun with my DS Lite
Elliot... I JUST used my ifixit set to install some PC parts and didn't even realize the grid under the lid is to separate the screws...
Couldn't you use like the plastic floss picks for the rubber nubbins as well? its hard not to damage the rubber regardless I know
Loving the content lately Elliot
I tried to fix two nds lites and had such a hard time with the ribbon cables.
Just to let you know, that guid works with things. What was it you said about screws there all different and will brake things! I rounded a screw off😀, also the padding clip fixing in the top screen case fell off...oh well, don't know whether it will affect things.
I’m addicted to these, I’m curious where do you buy your new screens from?
i've never seen a ds lite that has the logo on the inside like that before. did earlier versions have that or
If one of the speakers goes dead, that means the entire top screen is toast, right? since the speakers use the screen's ribbon cable?
Whoever had a panic attack like me at the 16min mark where he tests the screen, plug that chip back on the board that had adhesive on it.
This is the worst repair work that can happen to a human being...
You did great!
Are today's replacement screen good quality? Which ones do you buy? The tn panels I bought in the past were true horror.
For Ds lites all the replacement screens I’ve bought have been fine, about the same as oem quality
I had no issues with aftermarket ds screens so far.
Though... "worst repair work"? I have tried getting into a 3DS and gave up after minutes. There is _so_much_stuff_ in there.
Hallo, Elliot, I need little help on repairing my SNES - it is turning on, but just black screen. I tried to unmount and cleen the card reader but it keeps on showing just black screen.
I better see that pigeon in the credits.
does any one happen to know what exactly causes the top screens to yellow like that? i have seen a few ds/lite that have similar issues. just curious for hypothesis'.
If the ds is a Japanese model, the humidity causes the screen to yellow. Even if the ds left Japan years ago, the screens would still be yellow from when they were in Japan
@@J007ack i am in northeast ohio us. its very humid here in the summer. climate control is important. noted!
I have a copy of pokemon silver that I have changed the battery on but it still won’t save. Would you be interested in using it for a video?
I misread this and thought you are making a DS light with two top screens XD
I think I messed up the bottom screen on my DSL by removing the digitizer, plus I snapped the tab off the connector that the cable plugs into the board anyway, I think I would be better off trying to fix my original NDS again that needs the replacement boards that go in the top half. I don't have any real money in them anyway they were just cheap yard sale finds decades ago.
Well done
My only issue with ds lites is getting the shoulder buttons to stay in place when putting the back shell back on. The springs always bounce back out on me. Probably a skill issue 😅
Watching this and learning that i probably need to pay someone to do this
I dying for another watch build 😫
Does anyone know if the replacement screens are as prone to yellowing as the original ones? My DS Lite shows the yellowing now and I want to know if it even makes sense to replace the screens.
I don’t know if the replacement shells yellow, but if you want to get rid of the yellowing on your Ds screens, you can leave the console on the Home Screen at max brightness for a few day (or weeks depending on how yellow they are) and it should either get rid of the yellowing or greatly reduce it
Does anyone know where I could buy a replacement screens
Love the video so fun, my favorite handheld is the ds
I just got my black ds a few days ago after not having one for maybe 14 years. I wanna take it apart to clean it, and i wanna put good screens in it cuz mine are slightly yellow and i just dont like how bad they are compared to a gba despite being newer. And far as ive seen theres no ips upgraded screens for the ds like there is for literally every gb. Am i just stuck to getting "new" oem ds screens or is there actual better screens?
If you want to get rid of the yellowing, you can just leave it on max brightness for a few days (or weeks depending on the yellowing) and that should lower the yellowing if not get rid of it
A mí me gusta el washón del video por eso me suscribí hace años y aca estamos, tengo ganas de fabricar un reloj por partes compradas en aliexpress ahora
Luckly it happend once but I put back together the whole DS (battery and all) and when I flipped it open I discoverd I forgot the buttons...then I said out loud "Well I'm going to bed now, this is a problem for tomorrrrowww"
All wires are a ribbon cable to Elliot!
Hau dude loves your videos wondering if you can help me i wanna build my own watch from aliexpress but last time i ordered i got rippped off just want skme advice
I still have one but I got no "rechrage cable" to work with it... LOL
What exact IFIXIT toolset do you use? I would be very grateful for an answer.
His is the Pro Tech Toolkit. I find it strange that he never uses the metal spudger to lift the screw covers. It works way better than what he does.
Amazing !
i have a really broken ds lite that i need a lot of parts for
yooo new video!
i just did all of this only to finish and realize that my replacement screen has a dead pixel in it 😭 fml
i just noticed that the pick dsl says Nintendo DSlite on the front on the left of the bottom screen.....is that a special ds lite?? ive never seen that before, or is that just part of the protective films?
I like toast
I wish someone could repair my DMG Gameboy 😢
Can you fix my blue ds lite and ship it back to me? If you tell me my address I'll ship it to you and then I'll put my address and you ship it back it got destroyed by accidentally dropping it into the toilet right after I went to school it was flashing and turned off never turned on again can you fix it and ship it back
7th
sorry but this video is absolutely NOT helpful! when you place something wrong or forget something, please cut the video in the right order!!!
elliot i dmed you 😓
🐦 BROO! BROO! BROO!
Hey man. Nice bumping into you in the record store the other week. Thanks again for the kindness you showed me you are a true gentleman. I wish you much success health and happiness. Much love.
Was a pleasure to meet you! Congratulations again & I hope you had a lovely visit.
You swapped the polarity of the right speaker. Everything the left speaker plays will be canceled out by the right speaker. Make sure to connect the speakers properly if you wanna keep the good sound quality of the Nintendo DS lite.
You beat me to it :) You're right, it will sound weird until the right speaker is properly wired.
You might want to mention that if your new bottom screen does not have rubber backing and is just bare metal, you will NEED to transfer it from the old one or it will blow the fuse and kill your system. It happened to me and seems like a big oversight to not even mention such a crucial step.
Why not use a toothpick to pry things out and not a screwdriver.
You were the inspiration for me building my first watch and I can’t wait to see you build more
It's so rare to find a ds lite with a bad battery, my suggestion is don't replace them.
hey ive been watching your vids for a while and actually got an ifixit toolkit for myself after seeing you use ifixit tools for your repairs....... have you ever had any issue with the bits not gripping the screws right? i think a few of mine are on the longer/pointier side (e.g. y000 and the philips 0) so they arent rlly gripping the screws im trying to take out :[ all theyre doing is stripping them. if you or anyone has tips to help with this thatd be great thank you........ anyways great video i love seeing ds lites getting fixed :]
So many steps but man Elliot you're a pro. You've really given me confidence to not be afraid to take apart my devices when they need a fix!
Good job man. A few things you can do to make it much easier next time, but practice makes perfect
I'm working a vid in a pre-run return to my old watch RUclips channel, should be done this weekend highlighting my two recent Seiko heavyweight customs that being the square Bell & Ross Radio Compass homage and my 4R35 heavily modded Tuna. Need to regulate the Tuna as it was a rebuild by myself but its dropping half a minute a week which is not good by my standards, I did have it apart so I could airbrush the tips of the custom trident seconds hand with a bright yellow acrylic as I just could not see the red, frosted the trident prongs and it looks darned good :D My main project at mo is one of my grails, a Slava automatic asymetric e.g. its wonky shaped and super rare, mine has the sought after purple dial and am putting in a brand new movement I buy from Germany usually couple a month as I refurbish my Soviet heavyweight watches.
Brilliant video mate ♥️
I have my red ds that I got for a birthday back in uni it has a lot of memories but it’s screens are yellowing a bit, I’m apprehensive about replacing them in case I mess up, think it’s worth buying a couple of cheap ones second had to practice on.
Grettings from Brazil! Love your work. Did you plan making a video about replacing the elna capacitor on PSP 3000 someday?
So usefull video. Nice thanks for sharing knowledge
Where do you order your screens from?
Heya dude. I am really struggling to find anyone who can repair my device. Any advice on who to call or where to ask? It's an old 2ds, a few things wrong with it.
Love the vids hope you have a great everything!
How is the quality of the screen replacements you bought?
weird that the metal sleeve the ribbon goes through was missing
Have you ever tried using something really sticky to remove the screw covers? Like silicone or a hot glue gun.
I was wondering who repairs Nintendo 3ds XL that are water damaged
Can you recommend a hinge for the New 3DS XL?
992nd likes, im using this video as a guide
Pigeon on your roof? Yummy 😊
yes first try😆
10th
The ds lite is my favorite console to repair. The gameboy is still a better handheld in my opinion but I love the ds lite because it’s what I grew up with and also was my first repair.
Can confirm. Replacing the top screen is a giant pain
Welcome back man, it’s been awhile love the new videos!
r/foundsqwerks
you're voice is so peaceful it helps me sleep, i love you.
4:31
I ordered a bottom screen and installed it. My DS lite would not boot anymore and if it did it was 5 seconds and off.... Im assuming aftermarket screens are junk... But I also wonder if the small ribbon cable with solder points is slightly different if it was shorting out the board somehow.... I love your retro videos and am a subscriber on twitch to Joey. Thats where I first searched you after you where on the live stream.... Great videos man.
I can think of two things it could be
1. The F2 fuse is blown
2. If you didn’t put insulation on the bottom screen before you put it in it could be shorting something out on the board, though this normally causes the f2 fuse to go out.
So I would check the f2 fuse, before anything else
@@PotatoHunts The first thing I check is fuses. But I'm really thinking it was shorting out because of those small solder pads on that unused ribbon cable that just hangs out in there.
Bit cranking the brightness and pointing 2 microscope leds directly at the screen and leaving it on plugged in for a couple days almost eliminated the screen yellowing so I am just going to sell it as is after the new antenna arrives. It will be on ebay for sale with a charger, stylus, and a game....
I got 3 ds that I need to fix the hinges. 😅 But they work. 😊
has emulator for iOS also for android you can play it Nintendo DS cross the devices you can wanna play a Nintendo DS emulator on your device specially on iOS you need to download bios to do it and download games make sure it own a game 😊
This DS Lite is rare because of the logo on the bottom left