HUGE SALE! Kenwood STZ-RF200WD Dual Camera Recording System for Harley Davidson® + Review & Install
HTML-код
- Опубликовано: 1 авг 2024
- We're having a blowout sale on this awesome camera system from Kenwood! This Kenwood STZ-RF200WD Dual Camera Recording System is for Harley Davidson® Motorcycles and other Motorsport applications! We've also included video on how to install the system, plus recorded video from Daytona Bike week at end from the Kenwood camera system we installed. Thanks for watching!!
To Purchase Click here
volunteeraudio.com/product/ke...
Contact us @
1-844-30AUDIO
www.VOLUNTEERAUDIO.com 
Авто/Мото
![Top 5 Best Motorcycle Dash Cams 2024 [Don't Buy Until You WATCH This]](/img/1.gif)
Hi Jay, I purchased this camera from you and got stuck doing the installation. I gave you a call and you promptly answered my questions for me to complete the installation. Wanted to say I really appreciate your help and thank you very much.
Thank you so much! I’m glad you got it installed!
You should see the footage I have hitting a deer with my Kenwood system!
Please share, jay@volaudio.com
Thanks Jay, now there something else I have to buy from you! Hahaha! Great video, God Bless!✌😇👍
Thank you Ken!
My tour pack has a metal bottom plate, I put gps sensor under fairing with Sirius antenna
On some installs we do as well
Another question for you Jay, if you were to connect the accessory wire to an always on circuit and only used the button to turn it off, how much would it draw switched ‘off’?
And if you had it connected to a battery tender, would it be sufficient to maintain the battery charge?
Thanks again
Tender would be sufficient but I would add a switch to turn off if you want ability to record with ignition off
Hey guys, thanks for all you do for us out here? Question - will you guys be at Daytona Biketoberfest this month?
We will be attending but not displaying, we will be walking and taking it in, planning our trip there in the spring to work
@@volunteeraudio OK, I have a problem with water getting into one of my bags and I can’t figure out why. Was wondering if I could have you check out there. I’ll keep trying then. Thanks again.
@volunteeraudio do you know where you will be set up for daytona bike week in march?
Jay, have you ever installed this into a tour pack? I would consider drilling a hole like the wiring hole and grommet on the left side on the right side. The GPS would stay in the tour pack, accessory power accessible from the tour pack outlet and the power, gnd, and speaker wires would go through the hole. Does this seem reasonable to you?
Thanks!
Yes you could install in a tourpack
Hi Jay, will the GPS antenna work properly if you installed it inside the top lid of the tour pack?
Also, will the shock detection work properly if the unit is mounted in any orientation? Vertical inside the tour pack.
Thanks!
Yes it should work through plastic but not metal, yes you can place the main unit in any orientation
Any news yet about an infotainment unit that will accept a WHIM or one that will pair with the Harley Boom headsets?
The Rockford radio does but is very lacking in every other part, when we know more about future radio models we will go over them in video
I have 2017 CVO SG what wire would I connected the yellow too. Like what color on the stock wiring harness
You need to pick a wire that powers on with ignition, there is a purple wire with blue strip in the fairing that runs the accessory port
Does the app do live video viewing, and can it detect if the bike is rolling backward for backing up?
You can view live footage from the bike on the app, there is no reverse feature
I just got the Camera kit, and I'm installing on my 2023 Ryker Rally. If I understand correctly, I don't have to connect the yellow wire to the ignition wire; I can connect the yellow wire to a headlight wire? I am having difficulty finding the ignition wire, but the headlight wire is easy to locate. Maybe connecting with a T-tap wire connector would be best?
As long as the headlight turns off and on with ignition that is fine
@@volunteeraudio Thank you.
That would be really awesome if it could be displayed on the stereo touchscreen
This is a dvr system, not a backup camera, it works really well and can be easily played back on you smart phone, and if you use the angle adjustment part of the app you can live view front or rear cameras
Hi Jay, would the GPS antennae be ok mounting under my faring next to the XM satellite radio antennae on my Street Glide CVO? Also my Boom Audio GTS factory navigation GPS antennae is under my faring also….What do you think?
Yes should be fine
Will this system work with the Soundstream HDHU.14si's ability to hook up a camera and will you be able to switch between front and rear cameras on the go with the HDHU.14si. Thanks for any info. Keep up the good work. God bless...
This will not integrate to the hdhu14+ or si, this would be a standalone unit
@@volunteeraudio do you sell anything that will....
@@albertoramos1927 we sell backup cameras but not a dvr system
Hello Jay I purchased one of these cameras and was wondering if it will hook up to the sound stream HU HD SI 14plus
It will not, it only displays through the phone app
@@volunteeraudio thanks for the quick reply
Can this work if the constant power and ignition power are only working off of ignition power alone? Reason I ask is I'd like to have a system that just plugs into a cigarette lighter type power source inside my truck.
It would not save memory functions like time correctly
@@volunteeraudio thank you for the fast reply! I subscribed, great channel. I am still buying 2 units from your store for my street bikes! I live in Maryville, TN, I ride my dirt bike at Windrock etc so I was oh hell yeah when you said Oliver Springs, TN. #supportlocalbusinesses
GPS antenna under the tourpak? Mine has a metal plate under it Will it still work fine?
@@miamited69 put it at the rear of the seat, in front of the plate
Hello, how long is the warranty on the unit? Also, do you guys have any similar products like this available ?
1 year warranty, this is the only camera system like this we carry
How do you remove the front fairing in the future if the camera is connected to it ? The wire and plug is routed under the fuel tank to the module. I do not want to remove the fuel tank every time i go into the front fairing
Simply remove the screw securing the camera to the mount
Just watch the little spacer in the middle of the mount. I already considered this and disassembled the camera from mount…going suck doing that while standing on head…
Can you use just one of the cameras? Just the front?
You can, in the app you can cut the rear camera off
i wish that you would have actually spent time on how to identify were the yellow wire for ACC connection goes and how to identify the best place to hook up. I am attempting to install this on my 2023 SV650, but i do not know how or where to hood up the yellow ACC wire. Getting frustrated to the point of ready to return it.
Yellow goes to any ignition wire that has 12volt with key on
so is that a cut and splice procedure? with the starter terminal block work?@@volunteeraudio
@@ApriliaTom most every motorcycle has an ignition feed to the lights, all parking lights are on anytime the key is on, in our install video we show finding this wire under the seat of the Harley we were working on at the rear lighting plug.
Agreed, saying “find and connect it” really isn’t helping. What’s that mean? Everything is done but this acc wire and I’m stuck.
I need help! Jay, I am stumped.
First, the Kenwood power line is too short for my Ryker Rally, so I have to extend the black, red, and yellow wires. I extended them with 20 gauge wires, connected with 22-18 gauge butt terminals, and the yellow wire with splice terminal tap to the headlights yellow wire. The headlight and Kenwood turned on when the engine started. I linked to my phone, adjusted the cameras, formatted the SD card, and set a new password. I turned the engine on and off 3 -4 times to ensure the Kenwood worked. Then, I zip tied the wires and closed the panels. I started the engine again, but this time I got nothing. The blue and yellow lights on the switch wouldn't come on anymore. I took everything out and checked for a break with a multimeter. I inserted a fine sewing needle into the female power cable connector and checked for a break with the multimeter from the batter ring connector to the female cable connector. I did that for the black wire, too, all connections good. The fuse is good, too. The headlight yellow wire splice terminal to the female cable connector is also good. Started the engine again, and the switch would not come on; I don't know what else to troubleshoot. I can't open the switch and the main unit to check if some wires inside have a break. I need help, I need your expertise, Jay. Or, should I call your shop technician where I bought the Kenwood from? Thank you.
We spoke earlier on the phone, we will get it sorted out
@@volunteeraudio I just sent the main unit and the switch to you via priority mail this morning for testing. Thank you very much.
@@AllenTam thank you
@@volunteeraudio Followup: Thank you for testing the Main Unit for me, Jay. I reconnected the power line to a different headlight harness line, and the unit is working now. I very much appreciate your help.
Dose it record voice sound ?
Yes it records audio, make sure sound is on in the settings menu
Would this work in a race car?
Yes, and we sell extension cables for longer camera runs
@@volunteeraudio should work fine with my dads race car since he cant see behind him
@@sh4ll0wtruth88 this is not a rear view camera but a dvr system to record the race
Has Kenwood discontinued this item
They have, these are new, still supported for tech support and apps and still warrantied
Please “NOTE”, that this unit will not work when it overheats !!!!! It will start working again once it cools down. Not a good choice for a Harley Davidson. You will know when it overheats because the blue led on the on the record button will turn red when overheated and then back to blue when it cools off.
We have installed several with no overheat issues. We also have installed many with the main module in the fairing which has worked great.
The only issue with that is I don't believe the cable for the rear camera will be long enough to mount at the rear of the cycle, but I will look at the length again. FYI, LOVE YOUR VIDEO’S !!!!!
@@DF-mb9kc we offer extensions for the cameras, thank you!
@@DF-mb9kci just unboxed mine and it's definitely long enough to mount in the faring of my 2024 ... i believe im going to install it there , im actually more worried about the power/ground harness being long enough but thats easier to lengthen
Sorry but this set up has much to be desired, I will stick with my GoPro H8.
Go pro makes a great product but this is permanently mounted and always recording, no need to charge
lol , gopro is great if you want garbage footage, a huge bulky camera that's begging to be stolen , the need to have it hard wired in or have 700 batteries unless you only ride 30 minutes a day