Hey Steven! :) The trick is that the brighter colors overpower the darker ones. But the red is still there in the shadows, and it will result in a much more visually interesting model in the end.
😀 To be fair, you only need the most basic knowledge of airbrushing to do this. Also, there is no blending, no glazing, only basic base coating. The most difficult thing in this is the edge highlighting, I would say.
This is insane 💀, I bought airbrush paints last week to try something like this for my leviathan box. Very happy to see it works & how to effectively do it
@@ph3lansminiaturesultramarines, I've spent the past few days printing custom shoulder pads & tyranid basing bits, along with dreadnought conversion pieces
I guess it might be possible, but it would be difficult. My advice would be to buy a super cheap airbrush + compressor combo from Amazon and experiment with that. (Make sure the compressor has an air tank!) That combo can do this and a lot more, and when you know you like it and know what you are doing, you can get a more expensive airbrush if you need it. You can get the full set for around 100 EUR these days. I bought it for 75 a few years ago ( and I still use the same compressor)
I was afraid, during the painting, I noticed a lot of mistakes, some colors sticking out on the others and smudging, but at the final show, when the finished work was revealed, I saw that you had corrected all these mistakes, and yes, I say bravo, a job well done, the figurines look very well.
Making mistakes is part of the process to a certain extent. The trick is to know where you can make them and how well you plan the process. For example, if I know that, I will have to repaint an area with black later in the process anyway, then it doesn't matter if I make mistakes there. That is why you gradually see the mistakes disappearing :)
04:51 The montage music always reminds me of this: ruclips.net/video/2K2wyd8K484/видео.html The plasma glow is something I'll definitely will be using in the future 🤔
Looking good! It's interesting to see how the red shadows are so apparent at first but on final reveal it's much harder to notice the red in it.
Hey Steven! :) The trick is that the brighter colors overpower the darker ones. But the red is still there in the shadows, and it will result in a much more visually interesting model in the end.
Paint in 5 easy steps
Step1 - learn to airbrush
Step2-4 get good
Step 5- call it done xp
😀 To be fair, you only need the most basic knowledge of airbrushing to do this. Also, there is no blending, no glazing, only basic base coating. The most difficult thing in this is the edge highlighting, I would say.
Can we get a video of crimson fists.
This is insane 💀, I bought airbrush paints last week to try something like this for my leviathan box. Very happy to see it works & how to effectively do it
I am planning to use this for my Leviathan troops as well :) What chapter will you be going for?
@@ph3lansminiaturesultramarines, I've spent the past few days printing custom shoulder pads & tyranid basing bits, along with dreadnought conversion pieces
Nice, so you chose the best chapter :D For Ultramar and Guilliman! :D
Thanks! Can we get a video of crimson fists.
Hey! Sure, I'll keep that in mind for a future video :)
They look fantastic mate
Thanks 😊
Easy steps... Pulls out an airbrush.. come on dude :P
Is actually amazing, I am tempted to to get airbrush. Do you think this could achieve through rattle can?
I guess it might be possible, but it would be difficult. My advice would be to buy a super cheap airbrush + compressor combo from Amazon and experiment with that. (Make sure the compressor has an air tank!) That combo can do this and a lot more, and when you know you like it and know what you are doing, you can get a more expensive airbrush if you need it. You can get the full set for around 100 EUR these days. I bought it for 75 a few years ago ( and I still use the same compressor)
You had my sub the second you said ultramarines are the best, great vid 👌
A man of fine taste 😀 Welcome to the channel!
I was afraid, during the painting, I noticed a lot of mistakes, some colors sticking out on the others and smudging, but at the final show, when the finished work was revealed, I saw that you had corrected all these mistakes, and yes, I say bravo, a job well done, the figurines look very well.
Making mistakes is part of the process to a certain extent. The trick is to know where you can make them and how well you plan the process. For example, if I know that, I will have to repaint an area with black later in the process anyway, then it doesn't matter if I make mistakes there. That is why you gradually see the mistakes disappearing :)
04:51 The montage music always reminds me of this: ruclips.net/video/2K2wyd8K484/видео.html The plasma glow is something I'll definitely will be using in the future 🤔
Do you need to prime white before prime the Khorne Red?
No. That might even make the red too bright. In my case, I had them primed black and then sprayed the red on top.