$1,300 Car gets Too Much Power!
HTML-код
- Опубликовано: 14 мар 2024
- Check out Custom Offsets and tell them Grind Hard Plumbing Co sent you: www.customwheeloffset.com Today we take a $1,300 car and give it 28,000 watts using a EV conversion kit from Elecrtro&Co. The next 100 Mile challenge is going to be different!
Shop Grind Hard here! www.grindhardplumbingco.com/
contact@grindhardplumbingco.com
Powerful electric motors, batteries and controllers used electroandcompany.com/collect...
We imported this Chang Li Through Electric Import Motors for $1400 off all vehicles (excluding the Gopher Pro). Use Code GRINDHARD24 electricimportmotors.com/coll...
PO BOX 2370
Sandpoint ID
83864 
Авто/Мото
Still so humbled and motivated by your comments on our last community post. You guys absolutely rock! - Edwin
Big ol weiner
Love seeing shop upgrades you guys deserve it
The link in your discription is not working for osme reason. It say: {"message":"Forbidden"}. Any reason of why that is? I do live in the Netherlands dont know if that shut be an issue.
No, You guys Rock! 🤘. From Seattle 98198
🎉😮😊😊❤😮😢😢😂😅😂😢😊😢
It's been wonderful watching Will's journey over the past few years from an excitable kid, to an accomplished engineer who is clearly confident in what he's building.
Grandpa?
I was just thinking the same thing
Just don't let him work on my car too many lose bolts! lol
Will always knows how to combine entertainment stupidity with brilliant mechanical engineering.
Brilliant is a hell of a stretch.
that pack pocket
@@billmoore7133
@@billmoore7133maybe minimal mechanical engineering
I love Will, but the continuous forgetting to tighten bolts drives me nuts
You make a perfect pair. Nuts and bolts. 😊
You could say you’re being driven nuts by him not driving nuts.
That's what is nice about Will.
He is the opposite of Ethan.
@@procatprocat9647 heard
Or not drive you nuts?
"As you can see, it went pretty well" - Premium
Pretty well!
Please use eye-protection you soon someone wont see much, and bet you rather be able seeing than hearing. Even if that sucks to. Yeah, I'm boring at partys to.
Guys. I want you to think about something. As a welder of 30+ yrs I keep seeing all you youtuber influencers doing the same thing. So whats the process of plasma cutting? Basically a superheated stream of air that is atomizing the media you are cutting and spraying it away from your kerf, thus seperating the pieces. Correct in laymans terms, if i had to explain it to a newbie? So have you looked under your table below the slag path? There is an electronic machine thats got a fan cooling it sucking in all that atomized iron and other ferrous materials directly into the case. Maybe its just me, but i have always kept my machines above my cutting/welding tables so I'm not blasting shavings or slag into them. They don't tend to work well when they short out.
Not likely they will see this comment, but you are 100% correct. This happened to my plasma like 15 years ago, got too much metal dust up in it and shorted the circuit board. Expensive lesson.
that and the vaporized steel being in the air, with no water bed or dust collection will screw up your lungs quick
🤓🤓
Ooooh that's a great point. I keep some 3D printers in the same space as my metal cutting equipment. I don't have much choice given my living conditions, but I will isolate and filter my printing spaces for now!
The plasma table is supposed to have water in it. It’s not blowing slag any farther than the table, that’s probably the safest spot in this case.
Of the mechanical masterpieces that have been dreamt up on this channel over the years could the Chang Li be the most entertaining? The Will and Edwin dynamic is awesome and a bit dangerous!
You should look for at least 7°angle for a U-joint, with both ends at the same angle and phase/yoke alignment. If they run straight, the needle bearings gets busted and if the angles or alignment is not correct, the rotational speed will change 4-8 times/revolution. Both ways it makes things vibrate.
Why would the needle bearings care about running straight?
Agreed on the two U-joints needing to have the same angle (plus correctly clocked joints), but could you explain what issue needle bearings have with no angle load?
Needles do not roll enough and with time they dig in which makes the joint sticky.
Yep agree
You make a wild claim. Please back it up.
I've never heard your claim about needle rollers.
Makes no sense to me.
Evidence time.
Link an article please
Needed this today guys! Been a rough week and yall just can’t help but spread positivity😁 thank you for the killer content!
Same! I’m a newly single, and it hurts but shout out Grindhard!
Heres to a better week next week! 🤟
@@GrindHardPlumbingCo what's up with him and the pushups?
@@Mrpup_gtwill has broken a SHITTON of phones by sitting on them and is being punished for his own good
The sneak peek at the light blue Chang-Li !! 23:30
They better name it Blue Lee!
(Bruce Lee, gettit?)
Make it dumb fast and name it Bruce sLEEper.
This is one of the few channels that I can sit down and watch long videos from and be entertained start to finish. Love the projects! Keep up the good work.
This must be the only channel i watch without drama just some guys doing there thing
No drama and no clickbaiting. Like Rob Dahm really disappointed me today with his "I totally DESTROYED my RX-7!" on what looked like a burned out shell...he disassembled it for chassis upgrades...
"Clearly hats are the best thing you could use to secure a battery down" literally as Ethan is cutting a box with a whole ass samurai sword 😂😂😂
It's cool to see how far Will has come with his fabrication skills. Keep Grindin'...
What, still making stupid mistakes? That seat mount was obviously way too high, even before he test fit.
@@1one3_Racing I'm 53 & still make stupid mistakes. Considering 2 years ago he didn't know shit, he's come a long way. That's a lot more than I can say about most kids his age. We could sit here and nit pick his flaws all day, like how will they get stuff out the back with the seats permanantly fixed? Maybe put them on hinges?.... point is... He's trying.
I forgot to put "Will's Drift Phonk" in this video 🙈
Need a chang-le rock track Edwin. Something to rock out to on the 100 mile challenge. Loved the "Will's drift Phonk" track.
10 push ups !
Chang-Le and I just got on my lunch break?! PREMIUM 😂
Perfect timing!
duude same!
DUDE SAME😂🤘🏼
Breakfast here in NZ
**ChangLi
Those two personalities and almost any adventure is a forsure hit. You guys do crazy stuff but stay humble and wholesome. May God Bless you and keep you safe.
“Papa Ethan”😂 love it
Papa Ethan, Professional Adult... and then he jumps on his giant mega wheel motorcycle.
Ive only been watching for a few months now, but I have to say that your video quality is fantastic. The editing and cinematography combined with the content are premium in every definition 👌
The new lift and monster compressor are SICK!
Makin' mechanical magic just got an extra PREMIUM upgrade!
It's soo cool to see how fast Will is progressing his skillsets. He's a beast of a fabricator!!
Chang Lee NEEDS a sway bar maybe use trailer hitch pins to disconnect it if needed.
Also needs. A ROLL BAR ASAP
I really genuinely love watching Will's skills and engineering mindset progress in real time
Since there's already someone following Will around to check for back pocket phones, maybe give that guy a torque wrench to check all Will's nuts and bolts too..
Loose nuts Willy is gonna hurt himself one of these days
Ethan and Edwin have such big hearts giving Will a job/opportunity to work with them on the channel and do his best at building cool shit. ❤ Y’all are great. Can’t wait for the monster chopper tests/send!
Love that a Wisconsin company is sponsoring you. Custom offsets is great to work with as a customer at least. My tires were delayed because of the manufacturer of the rubber. They took care of me very well and were very responsive with questions.
The whole reason im learning all my skills building a retrofitted old EZGO golfcart, with an upgraded electric motor system, is because of this, and you guys. I love it and can't wait to see how you get this to become 4 wheel drive.
I just love to see this channel grow and grow. You guys are a pleasure to watch and listen to. Keep it going!
Right on time for my lunch break 👍
brother!! same!!
Premium! I was thinking the same thing.
30 min lunch 40 min grind hard video 😢
@@that_red_dentside3968grindhard trumps work 😊
@that_red_dentside3968 After lunch, 10min restroom break. 😅
"Places you can't even run!" absolutely destroyed me.
Man that lift is going to make projects so much easier for you guys. Also I need some wheels for my jeep so I'll be checking out custom offsets! Thanks 👍
Its so nice working on new stuff. When I got my 17 tacoma off the show room floor, coming from a rotted out pathfinder and before that a 93 nissan pickup (litterally called pickup) it was so Premium! First oil change was I was like, wow I'm not getting rust in my eyes when i crawl under and touch anything.
I would like to see or hear steven more often. Or maybe see him learn to drive some stuff. But no pressure!
i have a real lack of confidence in my driving skills on the small loader we hace at work. and dont even have my car driving licences yet. So i can really relate to him when he talks about his driving skills.
Will and Edwin are such bad influences on each other. It’s amazing. Grind hard rocks
You guys are awesome! The amazing things you have managed to achieve through this channel is nothing short of incredible. It’s so cool to see how much you have all progressed over the years too, and I wonder what will be accomplished in the next 10 years. I have to say though, you owe your loyal subscribers a lot for the continued support and it’d be nice to see you give back in some way, like free to enter giveaways or something. Even just little things like parts, machinery, tools or vouchers it doesn’t have to be thousands worth. You could also build an email list this way too, which you can promote through so in a way you won’t lose out. I think it’s something that’s often overlooked which is understandable especially with how hard you all work but it’s, in my opinion, a necessity at the level you guys are at. Thank you for all the great videos and I look forward to see what happens next on the channel!
Someone should double check every bolt 😂great job guys thanks for sharing
Cross threading is poor man's loctite
@@user-neo71665yeeesss
This is youtube.
Effectiveness does not generate clicks or views.
Hahaha I only just realized you changed the T in the front Chang Li emblem into a J so instead of saying “TANK” it says “JANK”. that’s amazing.
man I can't wait to see this 100 mile run. That's all I'm waiting for. This is the best thing I've seen on the channel since the beginning (just my opinion, and I'm a weirdo maybe lol).
Saw the long box and just went "score, 2 post hoist!". The Ballancer is a score as well but the hoist is a game changer. Big ups on the air compressor as well.
Congrats on the Custom Offsets Sponsor!!!
Ordered my wheels from them, and can't complain.
Plus this was the video I been waiting on 🔥
"Places you can't even walk"
Keep em coming boys, y'all killin it!
who's liking this project a bit more than the off-road bike?
That thing was stupid dude. I watched it but it's like.. c'mon man..at least make something that works for it's purpose.
It's kind of like an occ bike. Looks cool, could even call it a work of art but completely useless. In all fairness, though, he did say that's what it would be when he started.
Only you .SMH
“Places you can’t even walk” bumper / windshield sticker for the Chang-le 😂🤘🏻
Love the video, love the content:
Will's growth as a fabricator has been amazing to witness.
I will add that maybe he should do some research on how u-joints work, by making the front half of that shaft nearly straight, and the rear at an angle, it's causing inconsistent speeds as suspensions flex.
U joints actually need matching angles front and rear to function properly.
I love u guys because yall are GANGSTER$!!
I have those same seats in my 95 dodge neon coupe race car lol. I love them.
So nice!
One of the best videos to date😂 yall got to interview the FedEx guy at some point, that would be hilarious
I like how the Extr-A Sketch hoodie got covered with mud almost immediately thus proving why it exists
I can confirm those seats are super comfy.
cost more than the car 😂
I know what’s wrong with it it ain’t got no gas in it
It's got too much 'gas'.
Well, you’re not wrong 😂
Ha..... suuuuuuper original.....
@@SKITEMAN oh reply (;
I love seeing wills fab progression. He seems like he's already learned so much probably guided by Ethan of course. Good job will!
I love watching you guys build stuff. You guys inspire me to build stuff.
You guys are so ready for 1000 mile challenge I can't wait to see it make it this time
props to bendpak for blessing you guys with their products. you guys really deserve it!!
Yall are one of the best channels out there. Cant wait to see what the Chang Lee does when its dry for a timed lap.
I frikin love this channel guys, the silliness is great you always make me laugh.
By far the best show on RUclips I look forward to every episode!
Nothing like getting home on a Friday and seeing that new Grind Hard vid waiting for me. Thanks, guys!
I recently started listening to the Sent and Bent back catalog. At the beginning of this video I was amazed how well Will was being responsible and really knows what he is doing. Then they drove it without lugnuts and shhhheeeww classic Will.
Congrats on the shop. Your hard work is really show you deserve it.
Ethan is hacking a box apart with a rusty 3ft sword and says the phrase "clearly that's the best thing to do that with" to Will's hat solution. Oh the irony and how I love it!
I bought Anthem wheels from Custom Offsets for my F-150. I bought 5 of them with Cooper ATS's that were delivered to my house with a new set of lug nuts and security lugs. It was a great experience.
Absolutely loving these. And that accident was so inevitable 😂 Can't wait for the next!
You guys crack me up and I'm here for all the things!
the good ole slap and that’s not going anywhere is what secured the build 😂👍🏾
🤣 the two of you are complete and total Nerds. Not only did you guys have me laughing. You also had me shaking my head.
Holy S!#$ the production quality jump you guys just made in one video is crazy.
I can't wait to see the front end come together on that thing and y'all do the 100 me challenge🎉💪🏼
I love this channel. Will does some dumb shit and makes silly videos. Then every week or so Ethan comes out with an absolute banger. Keep it up fellas!
easy battery mount is drilling a hole for a hook to go through on each side and then getting one of those rubber stretchy tie downs that have the metal hooks on the end. easy, cheep, and works pretty well.
Great job on the video folks! Thanks for making it.
Will getting tossed around in the ChangLi when it tipped over again had me cracking. lmao Great video!
I was just thinking how i love you guys don't scream for subs but didn't even mind after that stack, love the learning, fun and inspiration you guys share with us all cheers from the Don Valley in Aus
Had to put down my cat today.. This william upload really cheered me up. Thanks guys
I'm sorry about your loss... 😢
Can't wait to see the Chang Lee four wheel drive. Will is definitely a great addition to the channel
It's looking amazing you should be a overland trailer for the 100 miles challenge love the work keep it going
You guys continue to inspire me on my own hopeful projects!
Loose Bolts Willy back at it again! Waiting for the inevitable day he or Edwin decide the shop roof is a premium jump ramp with no possible or foreseeable risk involved. I also appreciate how Edwin can turn “throttle” into a 3 syllable word. Don’t ever change, lads!
Oh no Edwin you bought a Ford? I feel so sorry for you that is going to be a huge nightmare. hopefully you will be able to get rid of it by the time the warranty runs out on it.
once you get the four wheel drive under the Chang Li I think you see a noticeable improvement. it was tending to bury the nose in the deep snow.
these guys have the life, I would gladly trade lives with them in a New York minute. that's the most fun you can have with your clothes on. this is why GHPC has always been and always will be my favorite premium YT channel for sure. keep up the great work guys.
All the success thats coming your way is well deserved lads thank you for the content 🇬🇧🤘
I just want to say I love these longer interesting videos keep the good work up guys
Watching it bounce around in the snow, I feel like you should paint the top yellow and make it look like one of those Little Tyke cars 😂😂😂😂. The front grill with JANK on it made me laugh.
BENDPAK you guys are premium for looking after the Grind Hard crue.... 💯🙏🙏💯
Put the front axle under the springs for better clearance. Good job guys!
I love this mini series!!! ❤❤❤
Love the new hoodie! Me and my buddies have been saying Etch-a-sketch for years! But I'm glad we aren't the only ones!
Always brings a smile to my day. Thanks!!
Will's attempted egress during the rollover was hilarious XD he tried to get out the window, but gravity won.
I think you guys are vastly underestimating what the average bear can endure. 25 miles and a gentle rollover? Yeah, when the chang-li gets "places bears cant even walk", that'll be impressive.
You guys are killing it. Can't wait to see if the monster chopper is rideable!
Time for ski and ATV track conversion awesome build guys🤟
I really enjoy when yall use the old school channel music. It just has an og grind hard vibe to
Yes! I was waiting for an episode like this!!
2:14 brother confidence is STRONG...
Little top heavy lol awesome build, always enjoy watching your accomplishments!! 👍🏼
why is this so entertaining ? you guys are living the dream!
You guys need higher and wider tyres on the back to get more grip on off road, but any way this build is sick!!! Love it 😍
The music in your videos is really on point, sometimes I just keep it rolling in the background just for the vibes..!
GHP has started a new apprentice program. I doubted it at first but now i'm seeing that it's working very well. Keep learning.
Dude Ive been waiting on this. It's awesome.
I do believe your cods have dropped since the first attempt to go 100 miles, how exciting.. both you guys and the car has grown some balls, well done !