I have that same Black & Decker driver... Put it away in storage a while back because it lacked power for household chores but resurrection of it a couple of years ago made it perfect for RCs. It was so happy to have a job again. Charged right up and works like it's still new. Best part is the gyro! Proof of, ”They sure don't make them like they used to!”
The Element Senduro HD is one badass rig out of the box. I swapped my comp wheels and tires over, along with HH electronics to a box stock. Trimmed the front bumper and took it to OKC for an event... and behold the Titan. Our resident scientist built one and the results were..."The most capable rig I've ever driven" ~John Schultz
I bought the HH Sherpa chassis and used my Enduro HD !! Dig the hat!!! But man it came out Awsome... I did a servo on axle mod to... Your rants are Awsome brother!! ✌️✌️🍻👍👍
I've been showing my Element a lot of love since I decided it's my new class 1. So, I'm going to be doing that same swap. Not to mess with your organization style, and with reservations I offer a tip. I bought one of those sheet magnets at the craftstore. When I'm pulling my rails, I put the new rails on the mat, and as I pull the screws they go in their basic area next to the new rails. Once the rail is free, pick up the new rail and put the old one where it was. This helps me if I have to walk away from a project. And I believe it speeds me up on the build over all. Love your work, man. Just bought a complete power system from you, omg. Your motor, and your servo, working off your esc, is crazy smoothly slow strong. Wow. Nice job. 2200 Revolver with a 9 tooth, mini V2, SHV 650 direct powered. In a 5.3 pound class 2 Creep. Be well, hope you and yours the best, have fun.
Just got one of my v2 boards wired up and loving it. I am currently putting this one in my G Shot chassis’s with vanquish axles it is a beast just in the testing faze right now 👍🏻👍🏻
It's Rhubarb Stew time. Chop it up like celery, put in a pot with a cup of water, cover and stem for 10 minutes until it breaks down, add sugar to taste and eat it hot.😋
My wife is from Korea and she loves dandelions. She likes to eat them the leaves and the heads. She makes kimchi out of leaves and it actually tastes good. And the only way to know when day when dandelions are safe to eat as if they are growing in your own yard . Plus I don't have a dog So that keeps them clean in my yard
Those shelves behind u look Alot better in the past few videos with full rigs lined up ready to go 👍 instead of like a graveyard for RC's where they go to die. Lol .
It's hard to find people in Michigan to go trail driving. And then I have to drive 35 mins away to go to my local rc shop which the name of it is family RC in Macomb
Spent all last summer in Michigan, Ann Arbor area. End up building a custom 24 scale out of Nankin Hobbies out there. You can see a little park by the river I ran my truck Boris and the Little Guy at, and The Truck I Call Michigan on my channel. Be well, and have a great day. 👍
You need to get yourself a Cow RC mat to work on and keep hardware separated. Their stuff is the best. As a hobby shop owner, I'm all about people spending money so I can feed my daughter, myself, and my dog. lol I'm not looking forward to the coming recession. It's likely going to be pretty substantial for a while. I've seen and had to fix many a ruined plastic part from people using power drivers. They spin way too fast and melt the plastic and everyone over torques stuff with them. 🤣 The carbon fiber dust won't get into your fingers, just into your lungs and give you mesothelioma. 😂 The Charlie Brown style piano music is excellent!
i just recently built my element titan, with a green mountain rc forward motor mount, using the firma 2-1 crawler combo 1400kv, its getting a 3brc atlas winch, traxxas 2250 servo, hilux c2 hardbody for a c2 build
I live in the ghetto in Kansas City Missouri off of 71 Highway and 55th if you know what I'm talkin about and I have to tell you I have a neighbor who spends thousands of dollars on his yard and bitches and moans at my yard I at least keep it mowed every week unlike the vacant house next door to mine who's got 2 ft of grass that is definitely not a big concern of mine people are funny as hell keep the videos coming I love them
I have that same Black & Decker driver... Put it away in storage a while back because it lacked power for household chores but resurrection of it a couple of years ago made it perfect for RCs. It was so happy to have a job again. Charged right up and works like it's still new. Best part is the gyro! Proof of, ”They sure don't make them like they used to!”
besides the rc stuff a lot of true words!
Cool video!!!
LUUUUUV THE THUMBNAIL
The Element Senduro HD is one badass rig out of the box. I swapped my comp wheels and tires over, along with HH electronics to a box stock. Trimmed the front bumper and took it to OKC for an event... and behold the Titan.
Our resident scientist built one and the results were..."The most capable rig I've ever driven" ~John Schultz
I bought the HH Sherpa chassis and used my Enduro HD !! Dig the hat!!!
But man it came out Awsome...
I did a servo on axle mod to...
Your rants are Awsome brother!!
✌️✌️🍻👍👍
I've been showing my Element a lot of love since I decided it's my new class 1. So, I'm going to be doing that same swap.
Not to mess with your organization style, and with reservations I offer a tip. I bought one of those sheet magnets at the craftstore. When I'm pulling my rails, I put the new rails on the mat, and as I pull the screws they go in their basic area next to the new rails. Once the rail is free, pick up the new rail and put the old one where it was. This helps me if I have to walk away from a project. And I believe it speeds me up on the build over all.
Love your work, man.
Just bought a complete power system from you, omg. Your motor, and your servo, working off your esc, is crazy smoothly slow strong. Wow. Nice job.
2200 Revolver with a 9 tooth, mini V2,
SHV 650 direct powered.
In a 5.3 pound class 2 Creep.
Be well, hope you and yours the best, have fun.
Just got one of my v2 boards wired up and loving it. I am currently putting this one in my G Shot chassis’s with vanquish axles it is a beast just in the testing faze right now 👍🏻👍🏻
Hello from southeast alaska
It's Rhubarb Stew time. Chop it up like celery, put in a pot with a cup of water, cover and stem for 10 minutes until it breaks down, add sugar to taste and eat it hot.😋
Hahaha! My favorite rig and now my favorite party hat!
Notification squad wya
My wife is from Korea and she loves dandelions. She likes to eat them the leaves and the heads. She makes kimchi out of leaves and it actually tastes good. And the only way to know when day when dandelions are safe to eat as if they are growing in your own yard . Plus I don't have a dog So that keeps them clean in my yard
Dandelion wine good
haha really appreciate the dandelion talk. My dad wont stand for those dandelions or that crabgrass!
Looks like a real nice frame
Those shelves behind u look Alot better in the past few videos with full rigs lined up ready to go 👍 instead of like a graveyard for RC's where they go to die. Lol .
After wasting too many hours on my lawn this year already, I agree with you! What’s wrong with having dandelion’s?
It's hard to find people in Michigan to go trail driving. And then I have to drive 35 mins away to go to my local rc shop which the name of it is family RC in Macomb
Spent all last summer in Michigan, Ann Arbor area.
End up building a custom 24 scale out of Nankin Hobbies out there. You can see a little park by the river I ran my truck Boris and the Little Guy at, and The Truck I Call Michigan on my channel.
Be well, and have a great day. 👍
“You there! Fill it up with petroleum distillate… and revulcanize my tires, post haste!”
-C.M.P.S. Burns
also the era cartons of cigarettes were a game show prize.
You need to get yourself a Cow RC mat to work on and keep hardware separated. Their stuff is the best. As a hobby shop owner, I'm all about people spending money so I can feed my daughter, myself, and my dog. lol I'm not looking forward to the coming recession. It's likely going to be pretty substantial for a while. I've seen and had to fix many a ruined plastic part from people using power drivers. They spin way too fast and melt the plastic and everyone over torques stuff with them. 🤣 The carbon fiber dust won't get into your fingers, just into your lungs and give you mesothelioma. 😂 The Charlie Brown style piano music is excellent!
I thought I was the only one who wore my rc bodies as hats...
I like bees...
i just recently built my element titan, with a green mountain rc forward motor mount, using the firma 2-1 crawler combo 1400kv, its getting a 3brc atlas winch, traxxas 2250 servo, hilux c2 hardbody for a c2 build
I live in the ghetto in Kansas City Missouri off of 71 Highway and 55th if you know what I'm talkin about and I have to tell you I have a neighbor who spends thousands of dollars on his yard and bitches and moans at my yard I at least keep it mowed every week unlike the vacant house next door to mine who's got 2 ft of grass that is definitely not a big concern of mine people are funny as hell keep the videos coming I love them
Instead of forgetting the radio, put it "on a Mexican Radio"... ;-) Nice frame swap - that thing is going to be quite the beast of an Enduro Senduro.
Love the vids man! Just wondering, wouldnt it be easier to just do one rail at a time? Asking for a friend.
I thought this was rc channel
Are you a George Carlin fan John?
"The planets gonna be fine....."
RIP George...