They come in different sizes depending on the kit. Phrozen has a video of them putting together one with a person standing next to it if you want to see the size difference
I only just found your site, and I'm eyeing that mecha godzilla model. I love the idea of 3d printed toys, because if the kids break them I can just print off a spare part.
This channel has single-handedly sold me on getting an FDM printer for making figures. Was worried I’d only have the brittle resin prints to rely on. These are so good.
Maybe trying out the Gigabitus 3D printer sounds like a great idea! Just make sure to do some research on how to properly use it to avoid any potential issues. As for creating Dx GigaRhinos and GigaPhoenix, that sounds like a fun and creative project to take on. Have fun experimenting with your 3D printer and bringing your designs to life.
I love your stuff. Have you ever looked into partnering with a filament supplier to offer the amount of color filament needed for builds? Like 100g of black, 50g of red etc.. ?
it's difficult to split filament that way. Print failures happen, different extruder sizes and infills, might use a raft or brim for adhesion etc. However, I see your point, maybe a partnered brand for a specific colour etc, that way you know your print COULD look like his print.
OK so that's definitely a king ghidora head Where's the rest of it😁....great models as usual..... Would definitely love to see video on how you go about making your models
bruh! that is actually how the scale of super mini pla version of Daijinryuu/Serpentera should be if Bandai have made one. cuz the super mini pla Daimugen/Shuttle Zord is smaller than its feet as it was seen in the series.
Dude your talent is just...no words. I'm printing the atom at 300%. Sliced is to make it a wall art piece for kids. Just trying to figure out how to add LEDs to it. Wish you would do a tmnt piece. Maybe krang.
I gotta ask, this looks nearly to scale with the SMP megazords & the Super robot chogokin megazords. however is it possible to scale it to the SH monster arts godzilla figures? using say FInal wars godzilla as the basis? i'm asking because I want to have this made for some, hopefully soon, stop motion animation. also how well do the joints hold up in terms of tightness? are the just right, or kinda loose to very stiff?
Base on TV series, I think the scale will work well with minipla size figures. I am not sure with Godzilla line because they are from different line. The joint can be tightened so it can hold its weight.
@@Toymakr3D the SH monster arts average godzilla height is ~6" tall. So I want to use that as the scale which is something like 1/564 scale lol. I plan to scale up the megazords since the SRC megazords are basically the same height as the SH monster arts
Please can you share the Blueprints of this Fantastic Serpentera Monster I reall want to get a Model like this so please can you email the design to me
@@Toymakr3D I know it’s a HUGE stretch, but I’d love a Voltron black lion in your style (or even a lion Zoid like Liger Zero)- it’s all mecha 😉. But one big bad a$$ Voltron black lion, would be a childhood dream come true. Of course, it needs the ability to sit (like in the cartoon ending credit). Not a combiner, just a robot lion.
I never realized just how big these prints are! I thought they'd be like the size of a Gundam model kit, but this exceeds my expectations!
Well it is lord Zedds Zord after all gotta go big :D
They come in different sizes depending on the kit. Phrozen has a video of them putting together one with a person standing next to it if you want to see the size difference
I had this as a child! They released a smaller version and I adored it! This is so cool to see printed!!!
I only just found your site, and I'm eyeing that mecha godzilla model. I love the idea of 3d printed toys, because if the kids break them I can just print off a spare part.
This channel has single-handedly sold me on getting an FDM printer for making figures. Was worried I’d only have the brittle resin prints to rely on. These are so good.
thank you
@@Toymakr3D whats the layer height of its?
Everyone say it with me . “We need a course or tutorial!” Lol
We need a course or tutorial!
I think this is the tutorial
@@iamallboy2957 on how to 3d model lol
Ok
We need a course or tutorial
Now all I want is to see this creator build Titanus these are so good
i love how you dont need to paint anything
thank you
Maybe trying out the Gigabitus 3D printer sounds like a great idea! Just make sure to do some research on how to properly use it to avoid any potential issues. As for creating Dx GigaRhinos and GigaPhoenix, that sounds like a fun and creative project to take on. Have fun experimenting with your 3D printer and bringing your designs to life.
Fun fact the original name for Serpentera in the Sendai was Daijinryu.
Which means in English Super God Dragon
I love your stuff. Have you ever looked into partnering with a filament supplier to offer the amount of color filament needed for builds? Like 100g of black, 50g of red etc.. ?
it's difficult to split filament that way.
Print failures happen, different extruder sizes and infills, might use a raft or brim for adhesion etc.
However, I see your point, maybe a partnered brand for a specific colour etc, that way you know your print COULD look like his print.
Leaving a comment here and liking it so I can find this later and print a full scale version someday
That, is, Astonishing!
Awesome job!
thank you
Love the stuff u make, can u make a 90s cartoon X-men sentinel? That would be awesome
MasyaAllah Luar biasa,SMG sukses sll..semakin mendunia
amin terimakasih atas doanya l, semoga sukses selalu
I thought it was made out of lego😂😂
ok this thing looks liek you could buy it from your local shop or a toy store, it's amazing!
thank you
Dude!!!! So sick! Awesome. It's the one piece I've never had. Great job!
Thank you
Now that's one big dragon
Awesome model , gravezord should deff be next
I really need to get myself a 3D printer.
I spent 3weeks printing...
very big..
impressed
That's what I call The Right way to use a 3D printer
(chants to himself) you're an adult you don't need to buy and print a toy.. You're an adult you don't need to buy and print *add to cart*
wow! this right here, GORGEOUS!😤🙌 Need one!
thank you
I will buy them both💯💪🏿....DOPE WORK!!!
OK so that's definitely a king ghidora head Where's the rest of it😁....great models as usual..... Would definitely love to see video on how you go about making your models
Wow!!! Does that come with wings too? Lol 👍🏻👍🏻👍🏻
So smooth 😍
thank you
Meraviglioso 👏🏾
What’s the difference between this and the Serpentera Zord
Also what is the backround music?
When i get that 3d print can i actually make it smaller so i can scale with other of my figures
Grud damn it your printer settings are on point. Models pretty damn good too 😁
thank you
@@Toymakr3D You gotta give tutorial videos on how we can do this ourselves! This looks amazing!
Looks like Bandai got some Competition
it's cool that you can 3D design and print it. bandai won't like this. 😂
Nice now how do you make it fly? Or is it out of power.
so cool i think you should do the shogun megazord next
I am not sure
@@Toymakr3D ok what about the dino thunder megazord
bruh! that is actually how the scale of super mini pla version of Daijinryuu/Serpentera should be if Bandai have made one. cuz the super mini pla Daimugen/Shuttle Zord is smaller than its feet as it was seen in the series.
Would this work on my adventure 3 printer I’m not sure if my software would allow me to make this thing
Unfortunately it is too big for my shelf 😞
One question though - did Zedd finally purchase those damn batteries?
haha maybe
Well it’s Great Dragon God technically speaking.
Dude your talent is just...no words. I'm printing the atom at 300%. Sliced is to make it a wall art piece for kids. Just trying to figure out how to add LEDs to it. Wish you would do a tmnt piece. Maybe krang.
thank you for your support
I gotta ask, this looks nearly to scale with the SMP megazords & the Super robot chogokin megazords. however is it possible to scale it to the SH monster arts godzilla figures? using say FInal wars godzilla as the basis? i'm asking because I want to have this made for some, hopefully soon, stop motion animation. also how well do the joints hold up in terms of tightness? are the just right, or kinda loose to very stiff?
Base on TV series, I think the scale will work well with minipla size figures. I am not sure with Godzilla line because they are from different line. The joint can be tightened so it can hold its weight.
@@Toymakr3D the SH monster arts average godzilla height is ~6" tall. So I want to use that as the scale which is something like 1/564 scale lol. I plan to scale up the megazords since the SRC megazords are basically the same height as the SH monster arts
Man I need more filament lol
You say it's not serpentera but it looks exactly like serpentera
Do you know the exact filament you used I might buy it after I'm done selling my prints
esun pine green and gold and black
Ok thanks I'll make sure to buy your file after I sell my prints
Should I use tree supports or regular supports
@@iamallboy2957 you don't need supports
A thanks is there anything else I need to know before printing this thing. Also are you going to make a tutorial or something.
Any glue required?
Do you sell these if so where can I buy them?
Do Trypticon next.
Nice MechaGodzilla and Serpenta Zord
What about a windmill Gundam?
Are you gonna make some day a combiner Zord?
I don't know, 3d printed material is not too good for combiner
I’m 100000% a power rangers fan, so this is awesome. However, will you consider doing this for the liger zero from zoids and it’s multiple forms?
A Zoids Liger Zero (or a robotic big lion) would be EPIC made like this.
Cada día te superas más impresionante
do you sell the daijinryu dx...?
woow!! well done bro!
thank you
Hi im very interested at this serpentera , how much around expensive is it ? 400 dollars to impress with this same quality?
Look sooo nice👌👌
Is it for sale....how much ??
“Made to fight Mechagodzilla” kind of stuff💀
Dudes the size of the moon
Yup.
What 3dprinter are you using?
What type of ipad you using pro or gen?
Omg so beautiful
thank you
Why don't you make motion videos?
Amazing! :D 🐉
Please can you share the Blueprints of this Fantastic Serpentera Monster I reall want to get a Model like this so please can you email the design to me
Where can i find the stl file for this?
That is massive
save dulu, kali aja bisa punya 3d printer sendiri haha
you should conduct classes on how to make your own action figure. i'd be your first student for sure
I share some mater files for learning purpose here www.toymakr3d.com/design-master
What kaiju or monster is that
Daijinryu
Can you do the modification this guy to King Ghidorah too?😅
Looks like Serpentera
Buy? Price?
Hasbro take notes!
This looks like a job for #3DPRINTINGNERD. This dragon is huge... over a meter long.
He is so big o.o I kinda want it to hold my Laptop ...
can you please do batman, iron man, and famous characters please
I only do Mecha robots
@@Toymakr3D sad to hear
can you please try though
@@Toymakr3D I know it’s a HUGE stretch, but I’d love a Voltron black lion in your style (or even a lion Zoid like Liger Zero)- it’s all mecha 😉. But one big bad a$$ Voltron black lion, would be a childhood dream come true. Of course, it needs the ability to sit (like in the cartoon ending credit). Not a combiner, just a robot lion.
Where can I buy this or the file for this
www.toymakr3d.com
Are you from Indonesi
can you make something from warhammer 40k?
Ini Daijinryuu bakalan bagus klo di-display sama Minipla Dairen-Oh yg baru di-announce, bang 😁👍
Iya bener, emg agak sy pasin sm minipla skalanya
@@Toymakr3D Assemblynya aja udah kyk model kit. Bandai mah mana mau mbuat model kit segede gaban kalo demandnya kurang 😂🤣
What scale is it?
Same as the toy version
Please Make Unicron from Transformers!
Porfavooorrr necesito el BLASTER de G1 transformers !!!! 🙏😭
I really want this :(
can i print this on a "ender3"printer？
yes you can, minimum requirement size is 20x20x20cm
how tall he is? inches height
about 53 cm / 23 inches
Increíble
Georgous❤❤
thank you 👍
Mecha ghidorah next please..
Cool and huge! How much is printing time?
1 week with 4 printers
@@Toymakr3D which type did you use if i may know?
I'm sorry but if it's a giant green Chinese
Dragon from a 90's kid show that can transform then that's definitely Serpentera.
haha
DAIJINRYU?!
Look like shenron
Holy Shit This kicksass 🤘👍
thank you
Shenron vibes
I hope you do dragontron from power rangers time force.
I don't know, there are already so much characters to make
@@Toymakr3D wow must be a lot of hard work to do.
Bandai not gonna like this
I want it