Launch Wheels On My Jon Boat
HTML-код
- Опубликовано: 13 ноя 2019
- Brocraft Boat Launch Wheels used:
amzn.to/2CHQKud
3M Marine 5200 Adhesive Sealant used:
amzn.to/2WnoPeo
__________________________________________
CHAPTER 4-
=Boat Launch Wheels On My Jon Boat=
INSTALL AND DEMO
This is the fourth video for the new jon boat to bass boat build I am doing. In this video I will do a step by step installation of Brocraft Boat Launch wheels on the transom of my 12 ft aluminum jon boat. I give an in depth look at the transom mount launch wheels I use, my thoughts on the product, an in depth step by step installation and show all the tools and materials needed to complete a quality installation. Lastly, I'll show you the launch wheels in action on the boat as a finished product! I will include details step by step through the process and all tools and materials needed to perform the task at hand on this jon boat project.
This is a continuing series documenting the build process of my new 12 ft jon boat project which will be a portable, trailerless, fishing boat. Whether you follow along to learn something or help with your jon boat project or just enjoy watching me on my boat project, hopefully you enjoy and can take something away from this process!
New videos coming every week documenting this ful build so stay tuned! Subscribe here and follow the build on:
INSTAGRAM: Adubjones
MAY YOUR TINY BOAT BUILDS BE GREAT!!!
thanks for this info I need these for my 14 ft boat it will be nice to move past the crowded boat dock
They are awesome man!
I'm planning to buy a 14 foot fishing boat but I have no idea if I can put it on my truck with a 6.5 feet bed.
Awesome stuff cuz! Thanks for showing the mechanics and setup so clearly. Makes the purchasing experience for a newbie like me much more confident and effective.
Genius!!! Was wondering how I could put my boat in the water, by myself, with most boat ramps made out of concrete and not scratching the heck out of the bottom after I’m all done with the restoration. Definitely going to add these to my Jon Boat build. Keep up the awesome work! 😎😎👍👍
So true bro
Doooope! Nice job Jones. This is exactly what I need for my Jon boat. Thanks again!
Those wheels are awesome. A tip for you, Some mineral spirits on your rag will make quick work of cleanup with 4200 or 5200. It makes it much easier than with just a rag alone.
Man......Now that’s dope!! I’m loving this boat!!
I’m going to get a set of these for my 12’. I have a trailer but some lakes I can’t back into. This is very helpful. Thanks!
I’ve been waiting for another video! Keep up the awesome work!!!
Same!
These wheels are awesome! Im taking them off my 10 ft and putting them on my new 12ft. Next step is side float pods or stabilizer of some kind.
Dude!!! thank you for this video!!! This helps me with my boat as i have been thinking about how to accomplish this kinda task. Keep up the excellent work.
Not a problem..Thanks fir watching and leaving feedback 👊
I've been watching alot of boat mod videos, thank you for craftsmanship and attention to detail. Beautifully done
Thanks so much man, appreciate positive feedback
Man I can’t wait for you to get back on this project
Me either👊
Nicely done. Thank you for the video
Thanks for watching!
I'm going too fab up my own, thx for a new project idea 😁
Thanks for checking it out
Beautiful job, it looks great! I just got a very old 14' jon boat to use for fishing in a reservoir (only rowing allowed) and plan to put a new transom and wheel on it. Will also paint it, but as it will live at the reservoir I won't be going all out with anything further. Do you plan to add handles back on? You are running out of space back there. I guess if it needs to be lifted the wheels make a nice handhold.
Yes, I plan to put handles back on. Will do after the float pods are welded on and I get to a final fabrication point on the transom. I have a few ideas, may actually do something custom and weld on. Yet to be determined.
Great looking product ! What are the length and width dimensions of the mounting bracket ?
sir, i like your video, u make think alot easier for us to learn.
Thank you for watching and your support!
Nice, new subscriber, great presentation brother!
U just gave me a super idea🙏🏾
Trailer on my rangers z21 is getting old I fish tournaments 2 to 4 hours away Anthony can u do a build recommendation for how many wheels I'm gonna need
I've been dragging my boat to the water. I need some of those wheels. My boat is trailered but not all my fishing holes have a launch.
Same here bro this will be great for my tiny boat
Cool Dr Jones!!
definitely need this thanks bro
No problem 👍
I love this. Does the wheels come in aluminum or jon boat green color rims?
Nice job
Hey awesome video very helpful. Wondering what drill bit size did you use when drilling the transom?
I have no clue. It's been a very long time...sorry.
Wonder if i could add these to a 15'6 gheenoe classic 🤔, cool video man, thanks for sharing
Good job. Plus with the wheels wider it's more stable on rough or sloped ground.
My thoughts exactly. Thank you
Looks good - I added some to my 12ft boat. The problem I have is it close to impossible to get them up once in the water - very awkward trying to push the pins. What are your recommendations?
Do you have the BroCraft ones specifically?
That boat is amazing for getting to ponds with no places to bank fish
For sure man. There are plenty of places I'm eyeing on raiding when this boat is done. No golf course, launchless river, neighborhood pond, or commercial complex pond will be safe. Looking forward to the trespassing warnings.
Ya bro get it that awesome that little boat will go where the big fish are and the big boats cant go
EXACTLY WHAT I NEED. Got a 1036 that I toss in teh bed of my truck. Love your channel bro
Thanks so much man, glad you enjoy!
@@AnthonyJonesBrigadeBoats I was gonna build a dolly.... this is way better. Got me a pair of Seamax deluxe 600lb rating now
Hey man those look awesome. Im looking to solve a problem with my jonboat w 6hp outboard maybe u can offer some advice. I use my jb mostly for bowhunting a stretch of creek. Where i hunt is about a mile from the nearest landing and a stretch of creek more often than not is blocked by huge fallen oaks. The solution to this would be to just pull the boat on the bank if the creek is to skurt the tree and put the boat back in the water. My question is do y think these wheels would work fir a 14' jb with an outboard? I saw urs doesnt have a motor so im sure they work fine. I have a trailer just trying to figure out how to get around these random trees. Lmk what u think.
I wonder if you could mount 2 more on the front , it would be like a little pontoon
How sturdy are those wheel bars though? I would think they would bow. I wanna do this on mine
Work great. No bow. Very strong. 500 pd weight capacity.
G job!!! What is the sealant called? I've got a hard time finding sth here in Poland. Is it a silicone or a special kind of marine stuff?
Link is in video description, its 3m 5200 marine sealant. I'm sure there are plenty of alternatives that could work.
Using 3M - 5200 !!! Mannn that shits so strong u didn’t even need to add bolts lol I was guessing you would of used 4200 it does a great job sealing but you can actually remove it if you ever had too . But summer awesome i looking to do this to my John boat ! Thanks for sharing!
Is it possible to tow a boat if you out wheels on this and eliminate the need for a separate trailer? That would be maximally efficient.
No. The wheels are not rated for speeds over 10mph maybe. Not saying it isn't possible with custom fabricated set up, but these aren't that.
Seamax makes a similar 2-position transom wheel setup.
I have a 12 foot aluminum boat with no trailer as well. Sure glad u made this video. Definitely don't want to be dragging my boat everywhere. Plus alot of the places I go, u cant drive down to. So takes a few minutes to walk to it. Me and my brother had to carry my boat for almost 3 quarters of a mile. It was a bitch lol
That sucks bro. The wheels are awesome, I highly recommend!!!
@@AnthonyJonesBrigadeBoats I definitely will be
Nice job. Would this work on a plastic boat?
I wouldn't see why not man.
I wish each wheel had two of the push button things and no pin. Plus, my boat {AlumaCraft 1232) has two handles on the transom right where the bracket will need to mount, and I don't want to remove them. I really do need a set of these launch wheels though.
How is it putting them up and down in the water
Genius
Thanks!
Thanks!
So, I'm a bit confused. Are the wheels for moving the boat around (like for storage), or are they for launching the boat? or both?
It's in the title. "Launch Wheels On My Jon Boat"
If you actually watch the video, I state at the 2:30 second mark why I use the wheels. But to save you from actually watching - the boat is trailerlessand goes in the bed of my truck. So the wheels are what the title of the video says they are.
This might be a dumb questions, have you ever tried to boat with the tires in the water?
I haven't. Not a dumb question. I can try it though, see what it does...
Can you face the wheels going the other direction? Instead of being under the boat, face them the other way & face them out? Great video thanks! 😊
I guess you can but two things. One, the transom load wouldn't be centered over the wheels anymore as your kicking the wheels out past the transom. Two, when you lift the wheels up they will then angle inside the boat. Just food for thought.
@@AnthonyJonesBrigadeBoats That makes total sense! Keep the video's coming i have learned so much! 🙂
Nice 👍
I’m assuming that boats 12 foot ?
Fkn SIK dude. First video to my question. Well fkn done! RAAAAAAAAGH
Do you think you be able to pull it with the wheels with a 15hp ?
I don't see why not. It was pretty easy to move with an 8hp.
@@AnthonyJonesBrigadeBoats thank you
Hey are you going to be doing anything else to this boat?
Yes, full build like the last one. Took a break over holiday season and also to work on house projects/shop. Be back shortly.
Where can I buy this?
It should have a pivoting screw to be able to lift it up while in the water.
Idk what you call it but once it's in the water I can push the spring loaded tab and flip the wheels up from under the water. No issues. I've done it plenty since this video.
Wish I could do that but I to nervous
those are awesome and look like damn good quality but I can't spend just under $200 for my cheap ass 1970s jon boat lol. when I eventually get a nicer one i would get them but I think I'll make my own for now.
Nothing wrong w that man! Lots of people have made their own but for the wheels I wanted to use and to make them right, it was about 75$. The brocraft ones are 150$. At that point I decided my time is more valuable to me than saving 75 bucks. So I just ordered them and bolted them on. I also have a pretty big budget on my build, so there's that as well.
@@AnthonyJonesBrigadeBoats on the amazon link you have they're $169.99. I think I could make them for around 20 to $30 with using stuff from harbor freight and maybe some scrap stuff I have laying around. The boat I have is a Tempco jon boat and it is beat to hell so I'm trying to get by with spending as little as possible on this project. I even made my own "motor" with a replacement minn kota propeller, stick of all thread, scrap conduit I had and a couple lock nuts and use my dewalt 20v drill haha made it for $20 but works like a charm! I'd love to get that electric outboard you have someday though! keep those videos coming tho buddy, they're awesome!!
Oh wow, they were 149.99 when I bought them! That stinks, everything is going up I feel due to covid. Anyhow, totally understand nan, good luck on your budget build! Sounds fun, maybe I should do something similar one day on the channel? Thanks for watching!
Anthony Jones that would definitely be a good video to make especially for people like me who like to make things themselves if it’s going on something cheap lol
Nice job, if those tires were non-inflatable / puncture proof that dolly would be perfect
I concur but these aren't that bad.
You could slime them if you wanted to.
Would you be able to drag this up a hill?
Oh yeah
How much were those wheels?
I think 150. Link is in video description. They may no longer be available as this video is a few years old
Must've ran into some snags while building the next part of this video series? I know life can be hectic and demanding, but I think I speak for all your fans when I say I'm anxious for the next video!
No snags regarding the boat build. I have simply not worked much on it. Holidays are a hectic time and we have some house projects going right now as well as me trying to build my shop (which I said I'd do before I ever started another boat build but did not). Sorry for the wait, be back soon enough.
@@AnthonyJonesBrigadeBoats thanks for the response 👍 I completely understand. Ive been so busy with my new house lately, I haven't hit the water in what seems like forever. Do what you need to do bud! We'll be here when you get back!
$150 for some wheels... I only paid $140 for my jon boat... I’ll just keep dragging it lol
You could DIY build your own for half that if you'd like. It's not worth my time to build my own to save 75 bucks, even if I did they wouldn't be as nice as these. Good quality parts aren't cheap. I thought the price was pretty good for what you get but I'm used to buying quality aftermarket parts for trucks, cars and motorcycles.
@@AnthonyJonesBrigadeBoats honestly that’s a great justification, I like that perspective 👍🏼
Dude you put them on backwards so now when folded up the weight hangs off the back, plus they’d be way more stable if they weren’t under the boat when pulling, they are curved so when folded up they fold inside the boat slightly but hey if you like your boat pilling wheelies the entire time go ahead and keep more weight hanging off the back.
Dude I can't tell you how wrong you are...
When folded up the weight hangs off the back? What weight? The plastic wheels???
Do me a favor in all seriousness. Here is the link to the exact wheels from the manufacturer. Click it and swipe the images and see that I installed them the way they designed them and recommend. You'll even see their install pictures match mine.
Brocraft Boat Launching Wheels/Boat Launching Dolly 12" Wheels for Inflatable Boats & Aluminum Boats a.co/d/aJwqmm9
spring balls are garbage, they will corrode & become useless, other than that I like the design of these
would have been fun seeing hanging over the back of the boat wrestling the wheels vin to the up position, they look like they will be miserable doing it in the water and not standing in back of the boat on the driveway