So what are you supposed to do if you can't get the lower press-fit mount off for the life of you? I've been trying for a day now to get the stock spindles separated from the Zbroz 34" a-arms so I can put the lift spindles on and no luck at all :(
It is, kind of but not really at the same time. The nut is held, but if you aren't carful the nut can fall if you push too much before engaging the bolt.
I've got a 23 free ride with the 36" front suspension. does this kit work with the factory reservoir shocks? I've heard that going with stock 34" A-Arms, the upper arms hit the reservoir when the suspension is compressed.
Quick question: do you guys ship to Norway? I am a private person looking at some new front shocks for my summit. would I be able to buy them directly from the website, or do I need to go through a distributor?
We can ship to Norway though it may be expensive, but you must call us at our customer service line to order, don't use the website. Call +1 435-753-7774 and we'll get you taken care of.
Ordered a set yesterday
question for you can you put a metal bushing in the upper A arm instead of the plastic on ?the plastique seam to were down very fast.
For most of our platforms, we have you reuse your factory bushings. But no, we only make delron bushings, no metal.
I’m assuming your intake clamp was already loose? Since you just slide the hood off
Yes, that was done in prep for this installation video.
So what are you supposed to do if you can't get the lower press-fit mount off for the life of you? I've been trying for a day now to get the stock spindles separated from the Zbroz 34" a-arms so I can put the lift spindles on and no luck at all :(
This is something we'll probable need to see pictures of. Can you give our customer service line a call and they will get your straightened out.
Is the rear nut held captive on the clutch side upper a arm?
It is, kind of but not really at the same time. The nut is held, but if you aren't carful the nut can fall if you push too much before engaging the bolt.
I've got a 23 free ride with the 36" front suspension. does this kit work with the factory reservoir shocks? I've heard that going with stock 34" A-Arms, the upper arms hit the reservoir when the suspension is compressed.
You will need to run the billet upper a-arm. That one clears, but the chromoly upper will hit your reservoir.
does freeride shock fit with the zbroz upper a-arm that you remove from the sled?
Yes, you can keep the stock shock and use this upper a-arm.
Quick question: do you guys ship to Norway?
I am a private person looking at some new front shocks for my summit.
would I be able to buy them directly from the website, or do I need to go through a distributor?
We can ship to Norway though it may be expensive, but you must call us at our customer service line to order, don't use the website.
Call +1 435-753-7774 and we'll get you taken care of.