Thank you for giving such clear instructions to a complete novice. Without knowing the basics, all your other videos would be no use to me. So, so pleased I came across your video.
Thank you. You are gifted in teaching. I know this is four years ago but I just bought my SDX125 and am lost. You helped me be “unlost”. Can’t wait to watch more as I subscribed to your channel.
Thank you so much for this video. I bought a Design and Cut a couple of weeks ago and began using it yesterday. Yesterday was an utter nightmare and I spent hours trying to set up my machine. Tonight has been the same, however I have just discovered your video half an hour ago. I love how you go through the features step-by-step, speak clearly and give great info about how to us the Canvas Workspace. Thank you and I am looking forward to watching more videos.
You are an absolutely amazing instructor!!!!! I learned so much from this tutorial. I truly appreciate you taking out time to teach all of us how to utilize the basic features. I so thankful I found you!!!
Hi you are welcome thank you that video is nearly 2 years old but I have lots of other videos on my RUclips channel and there is also a beginners playlist which may help
Thank you Ashley, although I have had my SNC for about 3 years and really not used it, I really appreciated you doing this in depth video. Awesome thank you. Val🇨🇦
Thank you for all your shows on how to use the scanncut machine. I truely follow you as you explain things really simple for myself to follow with my Head Injury re Brain again Thank you.
Had my SDX1000 for over a year and haven't even switched it on. I know, I know lol. Just downloaded CW today. So glad I found your channel. I have lots to learn. You make it look so easy. Subscribed.
Hi, Canvas online is probably easier to use if just starting off, they are more or less the same but the layout is different and you can do a few things with the download you cannot do with the online. I have lots of videos on my channel, they are all in playlist. you may want to look at the beginner playlist if you haven't used your machine before. Thank you have fun
Thank you for your helpful video. I am dyslexic so I finding it so difficult to use by myself. I am having to follow RUclips tutorials every time I use it
Hi Ashley, I have just downloaded this program, and you explained it very will for a beginner, easy to follow, Thanks so mush, I have been watching your channel for a while, I have just purchased my Scan N Cut CM 350, preloved one, I hope to get it early next week, Cheers Anna.
Thank you so much. I am a snc beginner and have heard of canvas but knew nothing about it!! I have been subscribing to your You Tube and love your tutorials xx
I’m an absolute beginner to snc. I’ve ordered one but waiting for stock to come in (says April) so I’m watching videos and learning. I have a cricut maker so have some experience with cutting machines ☺️
Can I just say how thankful I am to find you! Saving the file icon when you hover over it says OVERWRITE THIS PROJECT. So of course I didn't select it. Been hunting on my own a couple days for the save button.
I am working on the new Scan and Cut workspace but i want to open 2 files to join them together like I do on Canvas. Am I missing something because it won't let me it just closes the 1st program down. I find your Videos really clear and helpful. thank you so much for spending your time to help us all.
save the second cut file on your computer, and with the first file open and on screen use the >file>import file from computer and choose the second file it will appear on your mat with your other file
Hi, I am brand new to SnC! I am loving all your tutorials and finding them a massive help. Thank you so much :) I did request to join your facebook group last week :) looking forward to doing more projects on my machine. I did the chistmas tag one this morning and they turned out great x
You are a LIFESAVER! THANK YOU SO much from a beginner! I am blessed to have the ScanNCut DX overwhelmed but excited to learn how to make beautiful cards and beyond! Question what is an A4? I am in the US is that a UK size?
Hi just ordered my snc and have been playing with the software and watching your awesome video. I want to use the workspace download so that I can use my downloaded fonts but how do I save my project to the cloud. Thanks
Hi had a scan n cut cm300 for a couple of years now but only really cut tattered lace USB’s and Carnation Crafts. So not really using to its ability. Can you give me the names of a couple of your videos to watch to get me started. I’ve also got canvas workspace. I’ve purchased some svgs from dreaming tree, I also need a video to explain how to make my project. Hoping you’re able to help. Thanks Pat 🙏
Hi all my videos are in playlist, so if its something specific to the machine or a machine only tutorial it will be in the machine playlist, if its canvas workspace it will be in that playlist etc, so should be easier for you to browse for things
Thank you so much for the time and effort that you are giving us! I got my DX a few weeks ago, and you are by far the most informative of all that are doing RUclips videos! I do have one question....when choosing the size to format the area size, I only have 2 choices...the 12 X 12 or the 12 X 24. How do I get the choices for the others that you show on your screen? Thank you again!!!
Hi 5is Video is over a year old but from memory I have the other sizes because I’ve got the sticker kit, which uses A4 and postcard size. Thank you glad you like the videos.
@@applelover53 Thank you for getting back t o to me. You did mention that you had gotten the sticker pack, but wasn't sure if your A4 size was part of that. I do enjoy your videos and do your lessons along with you....step by step!
Thank you so much for this tutorial. Very informative. I haven’t had my scanN cut very long and it did not come with the card for the canvas workspace. Is this something I have to purchase separate?
Hi thank you, canvas workspace is a free program that can be used online or there is now a Windows and Mac downloadable version the link to online canvas is on my website www.applelover53.co.uk once you create a free account and login you will also find the link on there for the downloadable program too thank you
Hi Ashley, are you from anywhere near Little Lever, Bolton, youre accent seems very familiar. Also I had an aunt who lived in Breitmet that had a clock just like the one I hear in the background! Love your videos by the way, I am waiting for my first ScanNcut machine to arrive.
This video is from 2018, Canvas workspace will have been updated since then, but the latest version is always what you use online and if using the download version you can check for updates from the menu options at the top of your canvas page
Hi, thank you very much for the video. I would like to explain how I do to put other measures for the work table I only have 12 x 12 and 12 x 24. a4, etc not listed ...
Thanks for your great videos. When I use the straight path tool i get 2 lines coming out of each end of the blue dot. Any idea why and how to fix it? Thanks!
Hi that usually happens iy you are left clicking on the mouse and dragging at the same time. the best way to draw a straight line is to left click, let go hold the shift key down and just drag your mouse down, once you have got the line you want double click on the mouse to anchor the node.
Can you please tell me how to get the option of having the mat set at 8.5 x 11? I see you use A4 but don't know how you did that. Thanks for a very informative video.
You only get that option if you have bought and activated the sticker kit, as that uses A4 to go through a printer. thanks. the regular sized mat to work on is 12x12 or 12x24. thanks
i have a project in canvas workspace that I want to send to my scan & cut dx wireless can you please tell me how to do this and how to cut it - I am a total newbie tia
I am sure i have a video on my channel showing how to do this if you look in the canvas playlist you should find it. but basically you choose download from canvas, choose the wifi option, turn to SNC machine on and the wifi icon should light up, select it and your pattern will appear, save it and cut it. thanks
I’ve got videos on my channel showing how to use, save and download. When you save it will save as cwprj file, to your computer however if you go file you can then either export as an FCM file and Download and save it where you want or you can do file transfer via Wi-Fi if you have that option
I use a Mac and can online use canvas workspace online, go to my website and there are links on how to sign up for it, once you log in there is a link to the windows download version. It works the same but the layout is different.
Hi sorry i do not know what you mean, SNC Canvas, just renamed itself to Canvas workspace, so nothing is lost. I still have all my designs from over 3 yrs ago in the same online Canvas/Workspace.
You will only see your own projects once you have saved something, but you should see the Brother saved projects, if not try another browsers like I mentioned in the video
Never mind, what you see when login on website is what you are showing. What you can download looks nothing like what you are showing. So needed to log in to website.
Yes i only use the online version, as i am a Mac user and there isn't a downloadable version for Mac yet. and yes the online and download versions do look different.
Thank you for giving such clear instructions to a complete novice. Without knowing the basics, all your other videos would be no use to me. So, so pleased I came across your video.
Thank you. You are gifted in teaching. I know this is four years ago but I just bought my SDX125 and am lost. You helped me be “unlost”. Can’t wait to watch more as I subscribed to your channel.
Glad I could help!
Thank you for this. Two days into Scan n Cut and want to use canvas and you have helped enormously.
Great to hear!
Thank you so much for this video. I bought a Design and Cut a couple of weeks ago and began using it yesterday. Yesterday was an utter nightmare and I spent hours trying to set up my machine. Tonight has been the same, however I have just discovered your video half an hour ago. I love how you go through the features step-by-step, speak clearly and give great info about how to us the Canvas Workspace. Thank you and I am looking forward to watching more videos.
Thank you glad you like them, have fun and hope they help
You are an absolutely amazing instructor!!!!! I learned so much from this tutorial. I truly appreciate you taking out time to teach all of us how to utilize the basic features. I so thankful I found you!!!
Hi you are welcome thank you that video is nearly 2 years old but I have lots of other videos on my RUclips channel and there is also a beginners playlist which may help
Thank you Ashley, although I have had my SNC for about 3 years and really not used it, I really appreciated you doing this in depth video. Awesome thank you. Val🇨🇦
Thank you for all your shows on how to use the scanncut machine. I truely follow you as you explain things really simple for myself to follow with my Head Injury re Brain again Thank you.
Thank you. I nice way to start using my new toy. Helpful.
Thank you so much for this video. I paid $30 for a class to learn this and I got more out of your video than the class!
Thank you so much, thats nice of you to say. enjoy your machine.
Had my SDX1000 for over a year and haven't even switched it on. I know, I know lol. Just downloaded CW today. So glad I found your channel. I have lots to learn. You make it look so easy. Subscribed.
Hi, Canvas online is probably easier to use if just starting off, they are more or less the same but the layout is different and you can do a few things with the download you cannot do with the online. I have lots of videos on my channel, they are all in playlist. you may want to look at the beginner playlist if you haven't used your machine before. Thank you have fun
@@applelover53 Thanks hun.
Thank you! This video is very helpful. I hope the other videos are in a specific order for beginners. Thank you again!
All my videos are in playlist and cover various subjects. thank you
The best and easiest video I have watched. Than you so much
Thank you, you are welcome.
Same. I have watched other videos and they aren't that great. This is fantastic.
Thank you for your helpful video. I am dyslexic so I finding it so difficult to use by myself. I am having to follow RUclips tutorials every time I use it
Hi Ashley, I have just downloaded this program, and you explained it very will for a beginner, easy to follow, Thanks so mush, I have been watching your channel for a while, I have just purchased my Scan N Cut CM 350, preloved one, I hope to get it early next week, Cheers Anna.
Thank you have fun with it when it arrives.
Thank you so much. I am a snc beginner and have heard of canvas but knew nothing about it!! I have been subscribing to your You Tube and love your tutorials xx
You are welcome Canvas is available online or as a download version
Thank you so much, you are truly a life saver. I'm a beginner with the scanncut cm350
Glad I could help! Lots of videos on my channel for you
I’m an absolute beginner to snc. I’ve ordered one but waiting for stock to come in (says April) so I’m watching videos and learning. I have a cricut maker so have some experience with cutting machines ☺️
You can do it!
This is VERY helpful indeed! Thank you!
Glad it was helpful!
Thank you. I have only used my machine twice and I am trying to get to grips with welding. Thought it looked easier on Canvas!! X
It is, but you can also do it directly on the machine, I’ve shown how in several of my last videos.
applelover53 yes saw your video and have been trying to weld but still not successful even though the letters all look like they’re interlocking😢
This is such a true gift. I can't thank you enough for doing this series.😍
Thank you glad to help
Thanks Ashley. Even useful for folk who have been using SnC for a while.
Can I just say how thankful I am to find you! Saving the file icon when you hover over it says OVERWRITE THIS PROJECT. So of course I didn't select it. Been hunting on my own a couple days for the save button.
I know its a pain i think it needs changing, no idea why Brother called it overwrite.
Thank you so much, I do a lot with mine but now ,I can do lots more! I'm excited to try it ....🥰
Great thank you
Learned a lot from this tutorial, thanks, much appreciated.
Thank you Glad they help
thank u i have just got a scan n cut cm300 yesterday so will be watching your videos thank u 😊
Thank You I have lots of videos in all different playlists on my channel and there is a beginners playlist as well
@@applelover53 thank u i am going to have a look 😊
Thank you for taking the time out to give such a thorough instructional video! I’m gonna log in and click away now. 😝
Thank you so much, you are amazing
This is such a good tutorial you really explain it so I can understand.
Thank you
Great get started video! Thanks!
May be a beginners video, but I learned a couple things. Thank you!
I am working on the new Scan and Cut workspace but i want to open 2 files to join them together like I do on Canvas.
Am I missing something because it won't let me it just closes the 1st program down.
I find your Videos really clear and helpful.
thank you so much for spending your time to help us all.
save the second cut file on your computer, and with the first file open and on screen use the >file>import file from computer and choose the second file it will appear on your mat with your other file
Hi, I am brand new to SnC! I am loving all your tutorials and finding them a massive help. Thank you so much :) I did request to join your facebook group last week :) looking forward to doing more projects on my machine. I did the chistmas tag one this morning and they turned out great x
Thank you glad thy help I don’t really use the FB Page haven’t taken any new members for a long time, I mostly post on RUclips and my own website/blog
You are a LIFESAVER! THANK YOU SO much from a beginner! I am blessed to have the ScanNCut DX overwhelmed but excited to learn how to make beautiful cards and beyond!
Question what is an A4? I am in the US is that a UK size?
Thank you glad my videos on my channel help. I am in the UK A4 here is 8.25 x 11.75 so just slightly different to your 8.5 x 11
Hi just ordered my snc and have been playing with the software and watching your awesome video. I want to use the workspace download so that I can use my downloaded fonts but how do I save my project to the cloud. Thanks
once you have made your cut file in the download version, you can then upload/export it to CW online and resave it in there.
Hi had a scan n cut cm300 for a couple of years now but only really cut tattered lace USB’s and Carnation Crafts. So not really using to its ability. Can you give me the names of a couple of your videos to watch to get me started. I’ve also got canvas workspace. I’ve purchased some svgs from dreaming tree, I also need a video to explain how to make my project. Hoping you’re able to help. Thanks Pat 🙏
Hi all my videos are in playlist, so if its something specific to the machine or a machine only tutorial it will be in the machine playlist, if its canvas workspace it will be in that playlist etc, so should be easier for you to browse for things
Thank you!
Thank you so much for the time and effort that you are giving us! I got my DX a few weeks ago, and you are by far the most informative of all that are doing RUclips videos! I do have one question....when choosing the size to format the area size, I only have 2 choices...the 12 X 12 or the 12 X 24. How do I get the choices for the others that you show on your screen? Thank you again!!!
Hi 5is Video is over a year old but from memory I have the other sizes because I’ve got the sticker kit, which uses A4 and postcard size. Thank you glad you like the videos.
@@applelover53 Thank you for getting back t o to me. You did mention that you had gotten the sticker pack, but wasn't sure if your A4 size was part of that. I do enjoy your videos and do your lessons along with you....step by step!
Thank you so much for this tutorial. Very informative. I haven’t had my scanN cut very long and it did not come with the card for the canvas workspace. Is this something I have to purchase separate?
Hi thank you, canvas workspace is a free program that can be used online or there is now a Windows and Mac downloadable version the link to online canvas is on my website www.applelover53.co.uk once you create a free account and login you will also find the link on there for the downloadable program too thank you
Nice job! Informative!
Thank you
thanks for info it is appreciated
Hi Ashley, are you from anywhere near Little Lever, Bolton, youre accent seems very familiar. Also I had an aunt who lived in Breitmet that had a clock just like the one I hear in the background! Love your videos by the way, I am waiting for my first ScanNcut machine to arrive.
Hi no sorry I’m not, which SNC have you bought
What a great video thank you
Thank you
Brilliant thank you
You're very welcome
Is this the updated version for canvas workspace as if 2021? I have 650cw I think I need to learn the new canvas can u help
This video is from 2018, Canvas workspace will have been updated since then, but the latest version is always what you use online and if using the download version you can check for updates from the menu options at the top of your canvas page
Hi, thank you very much for the video. I would like to explain how I do to put other measures for the work table I only have 12 x 12 and 12 x 24.
a4, etc not listed ...
They are the only sizes that are available unless you have the Brother Scan n Cut sticker kit and then A4 will show up when that kit is activated
Thank you, this taught me a lot about this program.
Thanks for your great videos. When I use the straight path tool i get 2 lines coming out of each end of the blue dot. Any idea why and how to fix it?
Thanks!
Hi that usually happens iy you are left clicking on the mouse and dragging at the same time. the best way to draw a straight line is to left click, let go hold the shift key down and just drag your mouse down, once you have got the line you want double click on the mouse to anchor the node.
Can you please tell me how to get the option of having the mat set at 8.5 x 11? I see you use A4 but don't know how you did that. Thanks for a very informative video.
You only get that option if you have bought and activated the sticker kit, as that uses A4 to go through a printer. thanks. the regular sized mat to work on is 12x12 or 12x24. thanks
Is there an updated list for USB Compatible devices? Thanks
Not that I know of, sorry.
I can't get my artboard to show A4 size, just 12x12 or 12x24. Do you have to purchase a kit to get the A4 options ?
From memory I think I’ve got that because I have the sticker kit which uses A4 and 4x6 papers. Thank you
Thanks
i have a project in canvas workspace that I want to send to my scan & cut dx wireless can you please tell me how to do this and how to cut it - I am a total newbie tia
I am sure i have a video on my channel showing how to do this if you look in the canvas playlist you should find it. but basically you choose download from canvas, choose the wifi option, turn to SNC machine on and the wifi icon should light up, select it and your pattern will appear, save it and cut it. thanks
The new version doesn't have the download option, file type is cwprj and i can't change it. Any suggestions.
I’ve got videos on my channel showing how to use, save and download. When you save it will save as cwprj file, to your computer however if you go file you can then either export as an FCM file and Download and save it where you want or you can do file transfer via Wi-Fi if you have that option
Hi, would I be able to use this via a chromebook?
Canvas workspace for web is used online so if you can access the internet then yes
@@applelover53 thank you, would I be able to use fonts from a chromebook and from dafont.com too? Thank you for your help x
Sorry i dont know anything about a chrome book you would have to try it out yourself and see if you can.
Can you tell me how I can add a : in a file, i.e. as for the time 10:00 am?
Sorry I don’t know what you mean
How do l get to canvas work space . I am a real beginner Please go back on that introductory, help me to save and download it
I use a Mac and can online use canvas workspace online, go to my website and there are links on how to sign up for it, once you log in there is a link to the windows download version. It works the same but the layout is different.
I changed from ScanNcut Canvas to Workspace...and lost ALL of y deigns I made, how do I get them back?
Hi sorry i do not know what you mean, SNC Canvas, just renamed itself to Canvas workspace, so nothing is lost. I still have all my designs from over 3 yrs ago in the same online Canvas/Workspace.
Can you use an iPhone!?
If you can access the internet you should be able to, as it’s an online programme
my screen just shows canvas workspace no premloaded projects.
You will only see your own projects once you have saved something, but you should see the Brother saved projects, if not try another browsers like I mentioned in the video
Did you sign up for the site? If not, give that a try. If you already did that, you would need to sign in.
I was working on the offline Canvas Workspace, not the Online Canvas Workspace, my mistake. Thank you!
yes the online workspace and download version look different. i use a Mac and there isn't a download version for that yet.
My canvas workspace looks nothing like that. Did I download the wrong file? It's a brother scan n cut 2
All I get is the project page. Blank
Never mind, what you see when login on website is what you are showing. What you can download looks nothing like what you are showing. So needed to log in to website.
Yes i only use the online version, as i am a Mac user and there isn't a downloadable version for Mac yet. and yes the online and download versions do look different.