Hey Thank you!! I was looking for a similar simulation, in my case I need to create a Pressure Vessels made of a composite material, but I dont know how to simulated a composite material in Ansys, may you can explain me a bit, thanks for the attention, regards
Hello Sir, We have two coordinate systems in ANSYS, one is Cartesian and Cylindrical, If you apply displacement as zero in Cartesian means that you are not allowing the body or face or point in translation, Similarly if you apply displacement as zero in Cylindrical means that, you are not allowing the body or face or point to move Radially expansion (x), tangential movement (y) and axial movement (z)
@@fea_dme_creo_hypermesh Okay sir. if i hadn include any displacement boundary in my model, then i will not see any effect from the loads apply. am i right sir?
@@fea_dme_creo_hypermesh okay sir, last question. so for now, if i want to see the deformation of axial, radial and circumferential. so i should let the displacement for all direction to free. am i right sir?
@@haikalsheeran6556 If you set free all directions, ANSYS will not be able to solve, Create a center node and apply remote conditions to that node, you will be able to solve
Really well done! Appreciate the thoroughness in your explanation.
Really very helpful for beginners..🙏🏿 Expecting more contents from you sir 👍👍👍👍👍 Thank you
Excellent video Sir. Can you make a similar video for the vertical water storage tank also?
Superb sir.... please upload a video for the same stress distribution for closed cylindrical with hemisphere at two end....I need it ...thank u
Super sir
Share analytical solution also sir
Hey Thank you!! I was looking for a similar simulation, in my case I need to create a Pressure Vessels made of a composite material, but I dont know how to simulated a composite material in Ansys, may you can explain me a bit, thanks for the attention, regards
Good
Can you make the path as a 3D curve in Ansys?
how to find the longitudinal stress of pipe?
Sir upload that ppt, which u r explaining.
hello sir, i am wondering, what is the funtion of displacement sir? i quite confused. fyi i still noob in ansys
Hello Sir, We have two coordinate systems in ANSYS, one is Cartesian and Cylindrical, If you apply displacement as zero in Cartesian means that you are not allowing the body or face or point in translation,
Similarly if you apply displacement as zero in Cylindrical means that, you are not allowing the body or face or point to move Radially expansion (x), tangential movement (y) and axial movement (z)
@@fea_dme_creo_hypermesh Okay sir. if i hadn include any displacement boundary in my model, then i will not see any effect from the loads apply. am i right sir?
@@haikalsheeran6556 yes sir
@@fea_dme_creo_hypermesh okay sir, last question. so for now, if i want to see the deformation of axial, radial and circumferential. so i should let the displacement for all direction to free. am i right sir?
@@haikalsheeran6556 If you set free all directions, ANSYS will not be able to solve, Create a center node and apply remote conditions to that node, you will be able to solve
can you share your slides in here
Sir we need your help
Hi, yes please
Hiii
Hi sir ! I am a student from IIT Delhi. May I have your email id regarding some doubts
Sure, proraju2005@gmail.com
Excellent sir ..can I get your no sir ?
TQ for your appreciation sir, You can contact me through mail proraju2005@gmail.com