INSTALLING A CT CARBON NISMO WING ON A NISSAN R35 GTR AND REVIEW OF CT CARBON NISMO WING
HTML-код
- Опубликовано: 23 июн 2022
- In this video I do a full installation of CT Carbon's Nismo Style wing on my R35 GT-R. I show how to remove the stock wing as well as some hints and tricks on how to install a Nismo Wing. I then show how to measure and drill the holes in your trunk to install the Nismo wing. After it is installed I do a full review of CT Carbon Nismo Wing incase you were looking to buy. I show off the wings strengths and weaknesses so you are fully informed before you commit to buying.
_________________________________________________________________________________________________
If you are interested in supporting the channel, check out the JD Archer Shop for apparel like what I wear in the videos. jdarcher.bigcartel.com _________________________________________________________________________________________________
If you want to purchase any of the equipment used in this episode, click the links below.
Video Gear
GoPro Hero 9: amzn.to/3kMUYre
GoPro Media Mod: amzn.to/2Wjr6cz
Rode Wireless Go: amzn.to/3kNV5D5
Tools
Craftsman Tools (450 Piece): amzn.to/3AK0yzw
Craftsman Tools (320 Piece): amzn.to/3DXJ6cX
Craftsman Tools (230 Piece): amzn.to/3mOBp1C
Trim Removal Tools: amzn.to/3tByJZD
Craftsman Drill: amzn.to/3QH7CpG
Dremel Tool: amzn.to/3ydXlKh
Measuring Tape: amzn.to/3QLXR9F
Wire Stripper: amzn.to/39glOod
Crimp Connectors: amzn.to/3FGo9Ft
Spade Connectors (quick disconnects): amzn.to/3yCbOjU
Wire T-Taps: amzn.to/3Mcv8bp
Parts
CT Carbon Nismo Wing: www.ctcarbon.co/products/r35-...
EPI N-Tune Wing: www.epimotoring.com/shop/n-tu...
Darwin Pro Nismo Wing (Be Careful They Have Multiple Versions and Not All Are Full Carbin Fiber): darwinproaero.com/collections...
KP Carbon Nismo Wing: kpcarbon.com/collections/niss...
Expendables
Painters Tape: amzn.to/3tWIRfy
Vinyl 1 inch Dots (Multiple Colors Available): amzn.to/3tVDkFO
Goo Gone: amzn.to/3bnUUw3
Simple Green: amzn.to/3xSFl7b
3M Auto Advance Adhesive Remover: amzn.to/3bodkg6
_________________________________________________________________________________________________
Links to Similar and Related Videos:
WHAT'S IN THE BOX? AN UNBOXING OF SOMETHING COOL FROM CT CARBON FOR MY R35 GTR
• WHAT'S IN THE BOX? AN ...
INSTALLING A BRAKE BRACE ON MY NISSAN R35 GTR
• INSTALLING A BRAKE BRA...
CARBON FIBER WRAPPING THE CENTER CONSOLE OF MY NISSAN R35 GTR (HOW TO)
• CARBON FIBER WRAPPING ...
INSTALLING NEW FENDERS ON MY NISSAN R35 GTR • INSTALLING NEW FENDERS...
NISSAN R35 GT-R MAINTINANCE: HOW TO CHANGE THE BRAKES, ROTORS AND PADS PART 1
• NISSAN R35 GT-R MAINTI...
NISSAN R35 GTR MAINTINANCE: HOW TO INSTALL BRAKE ROTORS, PADS AND STEEL BRAIDED LINES PART 2
• NISSAN R35 GTR MAINTIN...
FIRST WORK DONE ON THE R35 NISSAN GT-R: MAINTINANCE OIL CHANGE
• FIRST WORK DONE ON THE...
MAINTINANCE ON A NISSAN R35 GTR: SPARK PLUGS
• MAINTINANCE ON A NISSA... ______________________________________________________________________________________________
You can follow me on: Instagram:@ j_d_archer
Tik Tok: www.tiktok.com/@jd_archer
Twitter: @jd_archer
Or I have a facebook page: / jdarchervlog _____________________________________________________________________________________________
I have now become an affiliate of Chemical Guys. If you want to support the channel as well as get some great products for cleaning you car, please click the link below.
www.tkqlhce.com/click-1002666... ______________________________________________________________________________________________
Music provided by www.bensound.com and Epidemic Sound ______________________________________________________________________________________________
#NISSAN #NISMO #GTR 
Авто/Мото
Another great instructional video!!
Darwinpro is also a very good vendor (as mentioned in this video). I ordered 17' Nismo front bumper from them before. Almost perfect fit (only a bit of adjustment to make by the body shop. No sanding, cutting, or anything crazy like that). The carbon fiber is of great quality. The only thing that sucks is the wait time. Darwinpro makes product inhouse, so it takes a bit of waiting once you placed the order. However, that just mean that they (probably) don't just send you cheap parts from other Chinese vendors like alibaba etc.
I mounted a similar wing from CT Carbon on my car in the spring of 2021. I bolted the central part with two m5 bolts. I put nut rivets in the central part, drilled holes, safer than just 3m tape.
Awesome install brother!! Thanks for doing the research on the companies, that sell carbon fiber wings as well. That was super informative!!
Thanks. The problem is there are all these companies and almost no reviews. Hoping to make it a little easier for the next round of buyers
I have now used the 3M Auto Advanced Adhesive Remover and it worked very well. Got the foam tape off and did not damage the paint. This stuff is way better than Goo Gone or WD40.
Great content as usual,, looks good
Thank you
Use a caramel wheel to get off the old sticky stuff, it works great! Love the wing, looks so good
Thanks. I got in the 3m auto advance adhesive remover. I haven't used it yet becuase we're battling over 100 degree Temps. If it doesn't work I will definitely try the wheel
Great video. You should have gotten the NTune ones. That wing looks cheap and awkward with "more rear edge sticking out" and that third brake light sucks with only double-sided tape and not flush with the trunk. But then it's your car.
I'm currently communicating with CT to see if I can either help, or work with them to improve their product. I'll post updates here
Nice make more videos going up Piuma
Copy that and thank you
You know you should just make sure the spoiler can handle 180 mph. Just to be safe.
I like your thinking
@@JDArcher Also that spoiler really makes the GTR look like Godzilla.
@@bbman2517 definitely makes it look more aggressive...so much better
@@JDArcher wing looks great!!
@@Twobarpsi thanks
Nice video, do you have plans for a Nismo front bumper? I’d love to do one but l don’t trust the fitment quality of something like N-Tune.
EPI, who makes N-Tune, seems pretty straight up. However I found a maker who makes polyurethane nismo front bumpers. I'll never work with a fiberglass nose piece again
@@JDArcher which company are you looking at for the Nismo front bumper?
@@darrenthomas5541 Jose Leon from the GTR pages on FB
So you gotta take it all off again when you get the holes filled and painted? Why not just do it once?
Becuase I have a few more things to do before the car will be ready for paint. Taking the wing off will take only a few minutes.
@@JDArcher right on, look forward to seeing it all finished, kinda like you’re making your own Nismo little by little, and I ain’t mad at that!!
@@Superdimensional yup. You caught me
So all done and dusted fitted this but at high speed the boot lid moves upon inspection the boot lid shuts but can push it up and down not solid tight when it closes they rubber adjusters that screw in and out when shut boot lid when screw out and close it pushes them in and there is play in the boot lid please help
That's odd, and it didnt do it before the change
@@JDArcher is okay I found out the issue the adjusters x4 on boot lid you pull centre part out then turn the screw on it to lock it was to much play in boot lid now is solid
@Gary Alcorn cool. Glad it worked out
Shame about that centre section not being curved, did you contact the manufacturer about it?
I did, they claimed to do a design and sent it to me. It wasn't enough of a change. I let them know. They said they were going to go again, but haven't heard from them in a while.
As I said, for a $1200 wing it's good, but if you have the $3k go with EPI
Are those lock nuts? If not, why aren’t you using lock tight? Nice wing. Personally, I would have gotten the holes filled and lid painted before installing…
Lock washers. The reason I haven't filled the holes is because I'm looking to do a color change anyway. Plus I want to get a set of EPI fenders and nismo nose
Can see that piece flying off with the 3 m tape maybe best glue it
Nope. It's been on the car for a few months, and been over 80 mph for an extended period of time on the way to and from Vegas
@@JDArcher seems sturdy then did you get the old holes filled in?
@@garyalcorn3831 not yet. I used vinyl dots for the moment. I want to wait till I finish the Nismo conversion to do all the body work and paint, or get a CF trunk
17:26 damn, i just can't do that to my car.
It's just the trunk. It's easily replaced. I wouldn't drill into the main body though...mainly becuase I don't like wide body kits
@@JDArcher still, it hurts to watch 😂
@@TinoushGTR I get it. I think it easier for me because I've installed body kits and wings before on cars like my MKIV Supra, FD RX7, Eclipse GSX and Miata
Should have saved the money and painted the fenders already. Not a good look for GTR
Actually i want either different fenders or nismo style bumper. That's why they're not painted yet