This is cool! I just gutted my very old Airtonics transmitter, added an Arduino Pro Micro, and made it into a native USB game controller. But then I ended up here because I was wondering if there was any way to add ELRS. Looks doable, if I feel like putting in the effort.
Dear colleagues, please tell me how to turn on bluetooth? What command should I send? For example, is it possible to turn on bluetooth since it changes power? To have a joystick for PC???
@@leejack1112 that is good news thanks! Settings be changed with Arduino code if I learn how to so that right? It is just not configured for stick commands right? Can’t tell you how happy I am to have found your project thank you so much for your hard work!
elrs has pwm receiver, so it is doable. For rc tank, you need customer mix, with the transmitter might not support, but you can write your mix in the code.
hi sir, thx for making such a good video and github source. allow me to ask, i have elrs tx module happymodel es 2.4GHz. and elrs receiver epdual. if i connect the elrs tx module with radiomaster remote controll it will bind with the receiver automatically, i've already set the firmware via elrs configurator. but i need to plugout the elrs tx module from the radiomaster RC, i wanna binding the elrs tx module via arduino nano to elrs receiver ep dual, is it possible? thx sir ^^
The oled is only connected to the elrs not the transmitter. There is an repo in the elrs hardware github.com/ExpressLRS/ExpressLRS-Hardware/tree/master/PCB/2400MHz/TX_SX1280_Super_Slim
![Chk Chk Boom - Stray Kids ストレイキッズ 스트레이 키즈 [Music Bank] | KBS WORLD TV 240719](http://i.ytimg.com/vi/63QPwqCRGcw/mqdefault.jpg)
Thanks for sharing your work and explaining everything!👍
Awesomesauce! thanks for showing this! I might build 3!
Could you please provide a link to the elrs module you are using?
Awesome project ❤
Good job 👌
This is cool! I just gutted my very old Airtonics transmitter, added an Arduino Pro Micro, and made it into a native USB game controller. But then I ended up here because I was wondering if there was any way to add ELRS. Looks doable, if I feel like putting in the effort.
Gread, Do you use USB HID? I wish I can add this funtion, can you share some code?
awesome
Dear colleagues, please tell me how to turn on bluetooth? What command should I send? For example, is it possible to turn on bluetooth since it changes power? To have a joystick for PC???
how are you binding the tx module to a receiver?
It's a nice project but using elrs 3. But model matching is led continuously blinking at rx
How about the range from it, have you check it?
Hi, the sample TX how can calibration and control through Betaflight control?
Can i use external elrs like betafpv elrs or aion elrs ?
Hi, What elrs transmitter are you using?
This is awesome! I just found this and would love to build it myself. Will this work for ELRS v3?
It will work with ELRS v3, but can not adjust any config.
@@leejack1112 that is good news thanks! Settings be changed with Arduino code if I learn how to so that right? It is just not configured for stick commands right? Can’t tell you how happy I am to have found your project thank you so much for your hard work!
You have a link for ExpressLRS 2.4G external TX module ?
Отлично!Вот подробную инструкцию и схему бы посмотреть!Как подключать lcd монитор и какие стики используются потенциометры или на датчиках холла?
Lcd is from elrs tx , both potential and analogy hall works
Cool project,but can i use this tx for rc tank,boat?
elrs has pwm receiver, so it is doable. For rc tank, you need customer mix, with the transmitter might not support, but you can write your mix in the code.
hi sir, thx for making such a good video and github source.
allow me to ask, i have elrs tx module happymodel es 2.4GHz. and elrs receiver epdual. if i connect the elrs tx module with radiomaster remote controll it will bind with the receiver automatically, i've already set the firmware via elrs configurator. but i need to plugout the elrs tx module from the radiomaster RC, i wanna binding the elrs tx module via arduino nano to elrs receiver ep dual, is it possible? thx sir ^^
Hello, which ExpressLRS 2.4G TX module are you using?
I use DIY superslim module
@@leejack1112 Can you give me a url link to your template?
感謝分享。目前 github 鏈結為 VSCode 原始碼。請問哪裡還能 取得如影片所示 Arduino IDE 原始碼。 Thanks!
在V0.93的分支里
hi, how to connect oled lcd?
The oled is only connected to the elrs not the transmitter. There is an repo in the elrs hardware github.com/ExpressLRS/ExpressLRS-Hardware/tree/master/PCB/2400MHz/TX_SX1280_Super_Slim
great job! can this work with elrs v3? you tried?
Yes, it can work with v3 but only with defaul setting
@@leejack1112 I tested your mode ppmToCrsf, ppm to d2 input with happymodel elrs v2. But this not working:(( what could be the problem?
@@intelpro_uav you need to flahs TX to uninverted to be able to connect to arduino
@@leejack1112 can i use Frsky S.port inverter?
How to use it with an simulator
it's a DIY project, so can you guess how you use it with the simulator?
You can use it with simple rx I have another repo