This is a great video. Exactly how I feel right now. So many people recommending so many things. I just started making tumblers 1 month ago and don’t know what I want to use. Will be watching all your videos. Thank you.
Question. If putting crystal lac grand finale on top of a sublimated tumbler (with added elements such as vinyl), obviously you can't sand the tumbler. Sand between coats and how many coats before sanding? What grit?
You can just keep adding grande finale until smooth. After 4 or so coats you can sand over the vinyl if you want to get it completely covered and smooth faster.
Hi Alison! I just wanted to ask you a quick question. I got my Grand Finale when it first came out. I see they call it Grand Finale 2.0. My container does not say 2.0 on it and it has a white label. Have they changed something since it first came out to make it 2.0. I am confused. Thank you for your help and all your great video's. I love them all!
Yes, after the initial release of GF, they tweaked the product a bit and released it as GF 2.0. Both are great products, but going forward you will probably order GF 2.0. Hope this helps.
8:30 Hi Allison, I make tumblers with material, paper, and vinyl. Do you recommend only using the BT on completed project? What about a base coat- is this only for painting tumblers?
So thankful for your videos. I finally realized that I'm allergic to the formaldehyde that is in resin after developing a terrible weeping rash all over my face, up my nose and all the way behind my ears. Miserable! I was so sad thinking that the fun I was having making tumblers had come to an end until I found out about Crystalac! I just ordered GF and so excited to try it and am watching all your videos. Something I haven't run across yet that I had used before is the use of spray paint as a base. I think I heard that I was ok to use with GF but I'm not clear how long I should wait for it to dry. I also have a ton of alcohol inks that I used to drop onto the epoxy for my swirl tumblers. I know I can't drop it onto the GF, but is there a way that I can still use it, or should I just pitch it? Thanks so much!
Every time I use the grandfanaly n I go to clean the tumbler. It gets sticky. Can u tell me why this is happening? N I am leaving them to dry for a long time. N putting it on thin as well. Don’t understand why ? Is there something I’m missing? 🙏 Please help ?????
I can’t really help without a picture but did you happen to leave the cap open and it started to dry out? I’d reach out to customer service at the company too
If you use this link and code SpringFling you can get 10% off: thecrystalacstore.com/products/grande-finale-fast-dry-tumbler-coat?_pos=1&_psq=grand&_ss=e&_v=1.0&sca_ref=301559.RjXXsfrXmN
FREE WEBINAR: 5 THIINGS YOU'RE DOING WRONG MAKING TUMBLERS: HTTPS://ALISONSULLIVAN.CO/WEBINAR
Hello Alison! Omg I thank you for posting the free webinar link!
I missed it ugh
Starting my tumbler journey and excited to try Grand Finale!
What geit sand paper should I use? Thank you
Rule #1 starts at 2:55 2:56
Can you use as a too coat for sublimated tumblers?
This is a great video. Exactly how I feel right now. So many people recommending so many things. I just started making tumblers 1 month ago and don’t know what I want to use. Will be watching all your videos. Thank you.
Glad you’re here! Feel free to reach out if you have questions along the way!
Help!!!
I love the Avril Lavigne clip 😭🤣
If I’m only doing vinyl lettering on an already colored Tumblr do I still need to sand it all down before using the crystaLac?
Yes you need to sand always before crystalac
hi, can you use Grand Finale with a Resiners epoxy dryer
No, no heat with it. Just let it dry 2 hours before you recoat
@@AlisonCrafts i am getting air bubbles when applying, any way to avoid?
@@deannachessel8206 you’re probably overworking it. It should only take about 20 seconds to apply and then leave it be!
@@AlisonCrafts thank you
Hello,
Thank you for the video. How do u use britetone or grand finale on sublimation tumblers? Thank you. :)
ruclips.net/video/hGu1Z83Iunk/видео.htmlsi=DhyGiDEgFqgtpmyD
Question. If putting crystal lac grand finale on top of a sublimated tumbler (with added elements such as vinyl), obviously you can't sand the tumbler. Sand between coats and how many coats before sanding? What grit?
You can just keep adding grande finale until smooth. After 4 or so coats you can sand over the vinyl if you want to get it completely covered and smooth faster.
Does the humidity effect crystalac like it does epoxy?
Do/can you use the additive in your grand finale 2.0? I can't keep the humidity controlled well where I craft. Does it matter with grand finale?
Hi Alison! I just wanted to ask you a quick question. I got my Grand Finale when it first came out. I see they call it Grand Finale 2.0. My container does not say 2.0 on it and it has a white label. Have they changed something since it first came out to make it 2.0. I am confused. Thank you for your help and all your great video's. I love them all!
Yes, after the initial release of GF, they tweaked the product a bit and released it as GF 2.0. Both are great products, but going forward you will probably order GF 2.0. Hope this helps.
Yes they have but you can still use what you’ve got!
Can you put crystalac on sublimination tumblers?
Yep! ruclips.net/video/OMVC_PLAePA/видео.html
8:30 Hi Allison, I make tumblers with material, paper, and vinyl. Do you recommend only using the BT on completed project? What about a base coat- is this only for painting tumblers?
So thankful for your videos. I finally realized that I'm allergic to the formaldehyde that is in resin after developing a terrible weeping rash all over my face, up my nose and all the way behind my ears. Miserable! I was so sad thinking that the fun I was having making tumblers had come to an end until I found out about Crystalac! I just ordered GF and so excited to try it and am watching all your videos. Something I haven't run across yet that I had used before is the use of spray paint as a base. I think I heard that I was ok to use with GF but I'm not clear how long I should wait for it to dry. I also have a ton of alcohol inks that I used to drop onto the epoxy for my swirl tumblers. I know I can't drop it onto the GF, but is there a way that I can still use it, or should I just pitch it? Thanks so much!
Every time I use the grandfanaly n I go to clean the tumbler. It gets sticky. Can u tell me why this is happening? N I am leaving them to dry for a long time. N putting it on thin as well. Don’t understand why ? Is there something I’m missing? 🙏 Please help ?????
What would make this happen? I only used this once and now it looks like this?
It is really thick I’m not able to post the picture
I can’t really help without a picture but did you happen to leave the cap open and it started to dry out? I’d reach out to customer service at the company too
Do u offer a discount at crystalac
If you use this link and code SpringFling you can get 10% off: thecrystalacstore.com/products/grande-finale-fast-dry-tumbler-coat?_pos=1&_psq=grand&_ss=e&_v=1.0&sca_ref=301559.RjXXsfrXmN