If you're wanting to put different wheels on a big red you probably have 4/150 lug spacing hubs and limited options. But 300ex hubs have the same spline count on the axles and changes the lug spacing to 4/110 and then you can put 12" modern wheels on it. Thats what I did works great.
Id run 1.5 pvc pipe and have it come out the rear tool box straight up with a pod filter on it. I dont want to cut my frame and i wouldnt trust the pool hose not to tear on branches
Nop, check for cracks/leak in the boot that goes from the engine to the carb or carb to air box. Make sure the carb breather i'snt pinched or something. Good luck.
Can you please send me a link to were you got your rims and tires or at least where I can buy them and make and model, I got same three wheeler and I'm looking todo some upgrades
André Martin lmao hmm what else could I use? I wonder if a vacuum line from a vacuum would work just seal the adapter part on the inside of the box and have the little nub stick outside?
I know time has passed but I am trying to find information on how to lift these things up, I know you probably get that question a lot lol. I have a 83 big red 200. I have done read forums for hours no luck any help would be appreciated
André Martin yes sir I have probably about 5 times lol, I understand the front somewhat but the rear I am lost. As far as hub used rim used tire. I would be more than happy to pay for a detailed explanation at this point lol
![Felix "Unfair" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/Oswujxm2Ag0/mqdefault.jpg)
Thanks man, Very helpful!! I didn't know about the crank case and carb vent, glad you mentioned it!!
Happy I can help!
Sweet vid bro. But you should really make a video about how you lifted it so you put on 30” silverbacks
Whare did u get your lift
best how to ive seen in my life ;)
Bon tuto , je voulait faire un snorkel sur le
Mien et je suis plus en confiance maintenant !
Fiere d'entendre sa!! 👍
Comment tu fait pour tourner moi j'ai n'ai un sur mon 200m pis si je mais sa a cette endroit je peut pas tourner
whats the material you used on the air box lid?
For the tubing how did you extend it? Just replace the hose or add a new one?
Which hose?
@@andremartinbike both of them like the carb one and the other?
What hubs do u have
Stock.
If you're wanting to put different wheels on a big red you probably have 4/150 lug spacing hubs and limited options. But 300ex hubs have the same spline count on the axles and changes the lug spacing to 4/110 and then you can put 12" modern wheels on it. Thats what I did works great.
Does your oil get milky
In your other video it doesn't explain how you lifted the three-wheeler 6in
Id run 1.5 pvc pipe and have it come out the rear tool box straight up with a pod filter on it. I dont want to cut my frame and i wouldnt trust the pool hose not to tear on branches
What motor wrk is done to turn those tires
Any advice will help
Thanks buddy. I wanna do this to my tw200 loljust for fun
Have you ever had problems with it dying when the carb goes underwater mine does I'm not sure why any ideas?
Nop, check for cracks/leak in the boot that goes from the engine to the carb or carb to air box. Make sure the carb breather i'snt pinched or something. Good luck.
Can you please send me a link to were you got your rims and tires or at least where I can buy them and make and model, I got same three wheeler and I'm looking todo some upgrades
I found these locally second hand. Silverbacks for tires and thr wheels are from a G1 renegade. They are flipped. Hope this helps!
I have an 83 big red and put 300ex hubs on it and that changes the lug spacing to 4/110 and then you can use 12" honda wheels
Did you have to cut the hole any larger in the airbox for that adapter you used or did it fit in the stock hole the rubber boot was originally on?
Pretty sure I had to cut it a little bigger, this fitting is round and the stock is oval.
André Martin Ok cool, did you use anything to seal it?
André Martin Find me that adapter from your work I'll pay you, I'm in Ontario lol I cant find it anywhere
It was something the plumbers left at the job site lol never seen one again.
André Martin lmao hmm what else could I use? I wonder if a vacuum line from a vacuum would work just seal the adapter part on the inside of the box and have the little nub stick outside?
Will your set up fit on a 1983 185s
Are you from New Brunswick?
Yessir.
How did you make your lift I have the same exact wheeler
Have a look at my other video.
Do you feel the 200cc engine doesn't have enough power at times even though it has a high and low range option?
Kyle Fry its pretty strong for what it is.
What are the specs on the front wheel
Will it melt the the snorkel that close to the motor???
4 years old, never had an issue.
Hi I just did this to my atc and it’s running wired right when I ran it with the snorkel
what size tubing some wont like 1.5"
did you to anything to where the stator wires are?
Chris Garneau Nop why?
André Martin wasn't sure if it was water tight ? I never checked to see
Can you show how you put a six in lift on it
Have a look at my other videos.
@@andremartinbike I have. You dont have one
I know time has passed but I am trying to find information on how to lift these things up, I know you probably get that question a lot lol. I have a 83 big red 200. I have done read forums for hours no luck any help would be appreciated
Watch my walk around video and give it a good look, It is self explanatory really. Very simple.
André Martin yes sir I have probably about 5 times lol, I understand the front somewhat but the rear I am lost. As far as hub used rim used tire. I would be more than happy to pay for a detailed explanation at this point lol
Add me on facebook, my profile pic is me on a canoe. I'll gladly answer any questions!
What year is that? I'm trying to figure out what year mine is
Three letters VIN
what wheels you got on that?
What is that piece you replaced on the airbox called?
Honestly no idea, something I took off a job site. lol
André Martin lmao currently trying to figure this out.... HELP!! xD
whats the backrack called
Hey how did you lift it?
Tyler moodie Cheque out my other video
What year and model?
crunchybacon25 1983 atc200e
What video is if
Hey boss do you have problems with snapping chains while playing in the mud?
Thomas Terry Never have, I run a good o-ring chain.
do more videos talking
Agreed
It