First Look: Ducati's DesertX Rally Modded For The Mexican 1000

Поделиться
HTML-код
  • Опубликовано: 15 янв 2025

Комментарии • 30

  • @ADVPulseVideos
    @ADVPulseVideos  8 месяцев назад

    For more details go to: www.advpulse.com/adv-news/ducati-takes-on-mexican-1000-with-new-desertx-rally/

  • @Fradant123
    @Fradant123 8 месяцев назад +4

    Great modifications ! I have the Ducati X Rally but nw I need these components ! where can I buy ?

    • @ADVPulseVideos
      @ADVPulseVideos  8 месяцев назад +6

      You can find a lot of the components like the carbon fiber tank, dual filter system, tower kit etc at aurora-rallyusa.com/. Other parts not there can be purchased through each of the corresponding manufacturers.

  • @Zerotys_ADV
    @Zerotys_ADV 8 месяцев назад +4

    Seems like the suspension was bottoming out quite a bit; at least it sounded like it. Loving that gas tank/air filter comb! Too bad we can't get some sort of non-race version of that. Such a cool machine!

    • @ADVPulseVideos
      @ADVPulseVideos  8 месяцев назад +3

      The cool thing is that all the parts, including the full carbon fiber tank, navigation tower etc are available for purchase.

    • @pascalroyere8559
      @pascalroyere8559 8 месяцев назад

      Can you help with the link for the purchase of this parts ?

    • @ADVPulseVideos
      @ADVPulseVideos  8 месяцев назад

      @@pascalroyere8559 You can find a lot of the components like the carbon fiber tank, dual filter system, tower kit etc at aurora-rallyusa.com/. Other parts not there can be purchased through each of the corresponding manufacturers.

    • @brianpalmerscv
      @brianpalmerscv 7 месяцев назад

      @@ADVPulseVideos Does that filter in the tank replace the one under the tank?

  • @karthik_87z
    @karthik_87z 20 дней назад

    Does removing one caliper require any kind of electronic override? Or it works fine straight away?

  • @MrJRothAndCo
    @MrJRothAndCo 5 месяцев назад

    With no rear foot pegs, how is the rear shock reservoir/adjuster mounted? Looks clean!

  • @Oldguy-k3t
    @Oldguy-k3t 3 месяца назад

    Is that the waterpump totally exposed on left side of engine?

  • @WorldCommander
    @WorldCommander 4 месяца назад

    Is that a GPS on there below the road book? What is it?

    • @jayd3931
      @jayd3931 3 месяца назад +1

      It's the screen for the bike. Speedo, etc.

  • @veetwotls
    @veetwotls 6 месяцев назад

    is that the back the front fender bottoming on the tire ? sounds similar to my 950SE done till i trimmed off the back the guard a little

    • @MrJRothAndCo
      @MrJRothAndCo 5 месяцев назад

      That noise is the rear shock mud guard rubbing on the tire when it has a hard compression.

    • @veetwotls
      @veetwotls 5 месяцев назад

      @MrJRothAndCo mine use to just rub at very back end of the front guard near the rad I trimmed 20mm off fixed it

  • @Rust_valley_adventures
    @Rust_valley_adventures 8 месяцев назад

    A liitle tip dont jump and let the side stand hit a rock at its mounting point or drop it if the side stand lands on a rock, the side stand is bolted into the engine casing and it will snap and put a hole in the rear of the engine, second time ive heard now of a hole in the engine case from a drop or hitting a rock from a jump with the side stand making contact being ridden offroad hard

  • @ryanrodriguez70
    @ryanrodriguez70 8 месяцев назад

    What about the suspension the revalve

    • @tobanhoffmann8347
      @tobanhoffmann8347 6 месяцев назад

      he says stock suspension, they must have blew the budget on the footpegs

  • @paul.vanhout57
    @paul.vanhout57 8 месяцев назад +4

    Certainly don’t ride my DesertX at that pace☹️

  • @kantutana13
    @kantutana13 8 месяцев назад

    very handsome bike! i would like to go to my local starbucks on that and take in all the praises!

  • @paolobutti9324
    @paolobutti9324 8 месяцев назад +1

    Bel mezzo fratello

  • @cacawachi
    @cacawachi 8 месяцев назад

    let the bike in the shot!

  • @lophophorawilliamsii9740
    @lophophorawilliamsii9740 7 месяцев назад

    I hate that intake location all the way in the front of the bike. It's just going to suck in all the dirt and everything.

  • @adriantompson
    @adriantompson 8 месяцев назад

    very bad designe that ram air desighne at front of bike its going to vacume every bit of dust in to the air filter. rest of bike looks good. i will be interested to see if it makes it to the finish with that designe.

    • @mits66
      @mits66 8 месяцев назад +2

      The air intake has a water trap and it feeds air in front of the air filter, not after it. On the other hand, there is also a twinair mesh preventing the dust from flooding the filter. Add to that the fact that the Aurora setup has dual filters (the intake is actually two filters, one on top, the one that you see on the tank and another in the OEM position, and it's quite tough for anything to enter the engine. There is also a provision to close the air duct in really tough conditions. We've been testing this for over a year now.

    • @adriantompson
      @adriantompson 8 месяцев назад +2

      @@mits66 that makes sense looked like you just had one filter, i have done a mod to the air box on my T7 with a dna air filter in, i am using a twin air dust cover to help the filter out in the dust. the mod makes a big difference to the torqe and peak torque is 1200 revers lower and holds it there for 3,000 rpm.

  • @tobanhoffmann8347
    @tobanhoffmann8347 6 месяцев назад

    ok now we can see the air filter!!

  • @alexs1972
    @alexs1972 8 месяцев назад +3

    "Ducati picked this rider because last year at the dakar he never fell once" 😂Ducati cares about the bike SO much it wasn't "he won his stages" it was "🤌he eehhh 🤌he not a🤌 droPPa da bike🤌🤌🤌"