Installation Tutorial for Two Parallel LPBF48300/LPBF48250 Machines
HTML-код
- Опубликовано: 21 авг 2024
- How are two LPBF48300 batteries connected together to the inverter? How are the positive and negative terminals connected? Where is the communication line? What's the installation sequence? This video will show you!
Do you have a better way? Leave a message bellow!
How are two LPBF48300 batteries connected together to the inverter? How are the positive and negative terminals connected? Where is the communication line? What's the installation sequence? This video will show you!
Do you have a better way? Leave a message bellow!
With this setup your battery on the RHS will work much harder than the battery on the LHS. You need to take positive from one battery and negative from the other battery so they can share the load equally.
You are right
Is that better
thank you
why at the 2nd battery you put the 5th dip switch up with 2nd dip switch ?
What will be the DIP switch settings when using just 1 of the battery
Please contact to our after-sales team, they will offer you more professional help:
felicityservice@felicitysolar.com/Whatsapp : +86 18620180651
It's just 1 and 5 pins. If it's two batteries, then check the video. Pin 5 is for the 120 Ohm resistor connector closing circuit. So, if one battery, it's pins 1 and 5 that are on.
Hi, can you help me with dip sw setting for 3 units @afollowerofchrist5789
I have only one battery, in my case only the word Li appears on the screen, but not the C, it only appears when it is a parallel configuration?
Email : felicityservice@felicitysolar.com
Have you found the answer please ?
thank you for this sir. i have 12 units of the 15kw battery, can i connect the communication of the 12 together?
also, i noticed that the battery capacity lights were initially blinking uniformly but after a while, the uniform blinking stopped. please is there a reason for this change or do i have to work another settings for this?
Hey, i'm planning on having the same, is there any issue paralleling them on a busbar except communication failure? did u get any feedback?
Thanks.
SW setting for 3 units of lpbf48300
Hello! If you have any questions, please contact Candy:
Tel/Whatsapp: +8618578741060
Email: candy@felicitysolar.com
Hallo. Ich habe 12.5 kW Batterie. Stehen da nur 80% zu Verfügung? Verstehe ich das richtig?
What are the cells type inside the battery? CATL or ???
Can I connect LPBA48100-OL and LPBF48100-M Felicity lithium battery models together? If yes, how do I do it please?
Hello, which country are you from? we will contact the local after-sale to help you
Please make a video differentiating between felicity 15kwh battery and felicity 12kwh battery. They look identical... Kindly help to differentiate so we don't get scammed by these dealers who simply change stickers on these batteries. This is rry important as dealers are changing the specification labels on these batteries to rip off unsuspecting customers and thereby diminishing the confidence of customers in your products
Hi, sincerely thanks for your suggestion. We've receive that. And we will take it into schedule. I am angry about the situation you mentioned about dealers changing labels to cheat customers. Felicity Solar prohibits such behavior, would you like to leave your position? We're going to look into this
@@felicitysolar Lagos Nigeria
@@francismartins8511 Ok, thanks. We will investigate it strictly
Felicity, can you explain the differences in the battery packaging here?
What type of cells please reply
Can your Li battery communicate with a transformer based felicity inverter??
Please contact to our after-sales team, they will offer you more professional help:
felicityservice@felicitysolar.com/Whatsapp : +86 18620180651
How many volts will this setup produce
hello dear, may I know which country you are from?
How can we reach out to a technical person with felicity solar to report most of the issues we are faced with on site
where are you locate? Let me check if there's door to door service in your area.
The communication cables are too short.. it doesn't get to the inverter during installation..
We've receive your idea, we will make progress on it. Thanks for your understanding.
if i have one battery must to set all to 00000? or so? 10001?
Have you found the answer please ? I don't have the C enabled
How can i connect two felicity lithium battery 15kwh in parallèle , the network cable between inverter and second . And pin position mean sw address
Please contact to our after-sales team, they will offer you more professional help:
felicityservice@felicitysolar.com/Whatsapp : +86 18620180651
Please, I need a video of how to parallel two inverters.
We have received your suggestion and will release it after we finish shooting with the technical department. Thanks for your suggestion, that's important to us.☺
It is so confusing - you guys have different drip switch parallel connection set up for different models of batteries, can't you make it unique!?
If you have any questions, please contact our staff:
Tel/Whatsapp: +8618578741060
Email: candy@felicitysolar.com