I used two felicity batteries connected parallel. Now what will be the DI Switch addresses on batteries 1 and batteries 2 for them to communicate properly? Thank you.
Im having issues with the communication between the IVPA-7548 and the LPBF48300-N battery (15k). Im using the provided cable to the COM port on battery and RS-485 Inverter port (also on the RS-232) and the Inverter doesn’t establishes the connection nor cant identify the battery type. Let me know of there is step order to do it. Any help
Thank you sir, I have two Felicity 5kwh batteries in parallel. When the batteries run down. One of them will be flashing red light on the first bar. It will not come up until I off the battery and on it again. The other one use to come up. Please any idea what I can do.
When i saw your title, i was very happy and only to get disappointed at the end. At the end, you didnt show or tell us if the inverter is communicating with the battery. The IVPS has no indication, how do we know it's work?
Just to be clear, you said something like, if it was the high frequency type it would show “c” and “Li”..? But on this transformer based it’s also has that icon but it doesn’t show it.
I used two felicity batteries connected parallel. Now what will be the DI Switch addresses on batteries 1 and batteries 2 for them to communicate properly?
Thank you.
How do uou set the sw codes on the battery
@@josephsadre8442 connect with us on 07054234162
The two top fans of that 10kw inverter should be stops? I have the same inverter but i feel it a little hot and the top fans are always stop.
@@williamfvega-cuebas1342 Then, there is an issue with it.
Im having issues with the communication between the IVPA-7548 and the LPBF48300-N battery (15k). Im using the provided cable to the COM port on battery and RS-485 Inverter port (also on the RS-232) and the Inverter doesn’t establishes the connection nor cant identify the battery type. Let me know of there is step order to do it. Any help
@@JonathanRivera-j8m connect with us on 07054234162
Thank you sir, I have two Felicity 5kwh batteries in parallel. When the batteries run down. One of them will be flashing red light on the first bar. It will not come up until I off the battery and on it again. The other one use to come up. Please any idea what I can do.
@tsarodavid9730 The battery needs to be communicated. Contact us for guidance 07054234162
I have two inputs on my 7.5kva inverter and my 15kwh battery. One which should I plug in the cable?
@@odaddinson Send a dm to +2347054234162
R485
When i saw your title, i was very happy and only to get disappointed at the end. At the end, you didnt show or tell us if the inverter is communicating with the battery. The IVPS has no indication, how do we know it's work?
It did work, you can see in the video, one battery can switch off all, that's the indication it worked.
@@thetrillsconsulting4081 I meant communication between inverter and battery. yes, the battery to battery communication works
Just to be clear, you said something like, if it was the high frequency type it would show “c” and “Li”..?
But on this transformer based it’s also has that icon but it doesn’t show it.
@@irokamoses6792 Check this video ruclips.net/video/hBAAxFz-hDU/видео.htmlsi=zUIVapvyNDSsqnk5