@JerryAintloud- When you burped 45Hz, and got 11k on your Amm-1, i noticed your voltage meter on your amp, only dropped down to 15.1volts! Thats 33k of total power @ 45Hz, and your battery bank held 15.1volts= Awesome!
Awesome video. You just thought me something I really needed to know. Trying a budget build and I'm using all the good advice to make wise selections. Thanks 👍
Jerry you need to do the same clamp test on all 3 amps. Positioning of subwoofers may have a different load on the amp and this cause all 3 amps to have different outputs
The lower the resistance, the more volts it will consume. So when u burp at 20hz you got 6600 watts because it lower your voltage down to probably 14v to 15v at 1.6 ohm. When you above 30hz, your are at 2 ohm or more, so your burp is 8000 watts or higher because your voltage is likely above 15v to 16v.
Should have came to audiolypics! I would of loved to have gotten a demo from ya! Saturday started a little slow but picked up in the afternoon, and some amazing builds yesterday
I'm going to do some testing with Chaz upcoming weekend with amm 1 he sold me a subwoofer so giving him a chance to see how it performs can't wait to see the results on a smart 5k on music
Nice bro demo/video. I feel the same way bout da Tap Outs as u do,low FREQUENCY is way better but that's my opinion. Dude I'd enjoy da hello outta hangin wit cha and pickin ur brain bout a few things. Just by this short video u tought me a couple things that I did not know, thought I did but in reality did not(well was wrong bout it)LOL. A few states below me if not I mi8 been able 2 lol,I'm n TN(30mins from B-MOTOR SPEEDWAY). But hellz yea brotha keep da good videos going ima go back and watch ur other 1s(around 16mins I liked and subscribed 2 ya lol)stay safe loud bass all day eryday lol.
Worst I’ve sat in was like 158 at 50 something for 30 seconds. That was rough. Also got a little 164 burp at like 38 at a show. Never tapped but I can understand why people do after experiencing that.
My last build was tuned to 60hz and hit 156.8db but there was no way anyone could stay in there for longer than a few seconds it was painful when the bass hit you.
@@lowriderbug 156.8db was painful?? Even for 60hz, i'd expect that to be fairly tolerable. I wonder if i could hit 155db at like 50hz with 2 big 18s now. That would be dope.
This is great man!! I swear just hours ago I was searching RUclips for vids on your DS18 amp. I have a AAB 7900.1 and I have always ran Koreans before I bought this 7900.1. I'm seeing all these deals on amps right now and I'm wondering if I should snag a Korean and ditch the full bridge AAB 7900.1 Deaf Bonce. Basshead problems like always Jerry lol
@JerryAintloud update I just bought a Hooligan 8k today! I've been Deaf Bonce and ended up getting an aak-6000 and it was too long for my system build. So I was stuck and had to use their aab model amps for a hot minute. I'm running 2 custom sundown 12s but I've got 2 V2 Banhammers that I can run at half ohm vs the sundowns running at 1 ohm. .. idk I'll get to the Banhammers eventually lol, no rush for now I'm enjoying the custom built sundowns
Every time I watch it, I'm impressed even more. I'm so elated I snagged one of those amps. It's on the way. Ordered off Amazon thru ds18 and it got canceled. Every car audio site is sold out, except d4s.... so I had to order from jp. I wanted to wait for black Friday but man my luck I'd wait and then couldn't find one
Good content talk about and show real numbers hurts a lot of grown men’s feeling. Especially when you switch to music and seen you only did like 1900. Also don’t forget you are running at 15.5 to 16 volts and your amps are rated at 14.4. 1 to 2 volt makes a lot of difference. So running at 1.6 ohm and making whatever power is only about 2/3 the of the equation. Still a good video keep them running man guys like you and EXO are real people who ain’t afraid to show what they know.
They say the built in cl ipping indicators on most amps arent real reliable. I would believe your amm1 over the amp...crazy how impedance rise isn't linear.you would think it rise with freq and that was the case until you did 40hz...lol good content Jerry
An amplifiers built in clip detection monitor is actually very reliable for most quality amplifiers. But they are usually set just a tad more conservative though.
I have down for sound shop amps and the clip indicator is pretty spot on, in fact the bass knob clip comes on slightly before the amp I clip indicator.
Question... i drive 2015 toyota corolla s , it had a stock 120 amp alt that charged at around 14.2v - i upgraded to a 320 amp JS and cant get above a 3.6- 3.8charge? is this normal or is something wrong?? i just want my stable 14.2v charge back and id be happy ..im running 2 dc level4 12's d2 ohms on a sundown sfb8k wired at 2 ohm there is a Toro 4 channel running my doors and and back dash speakers, got a xspower under the hood and a D4s LTo 6.0 in the back all1/0 upgrades as far as big3/4 and all that so everything i feel is done right but i dont understnad why im seeing lower voltages now than i was on a more stock electrical system..and do you think that may be adding 1 diode might get my to the 14 im looking for?
@@JerryAintloud I did im waiting on a reply..does this sound weird to you?? Wouldn't you think it would at least charge at the same amount as the stock alt at least?
Get camera angle we’re you can show voltage when you get the 11k. Wonder why music ohms are so much higher than a frequency burp that’s crazy. Amp shouldn’t never blew at those ohm loads
Hi Jerry, I really need to get in touch with you. I got some issues with my system, I have tried explaining it on the comments once but that didn't seems to get through to you. Do you have a mail address so I can explain it to you. Big fan of your RUclips page. Regards Deon
Are there certain brands that run better than others at higher voltage just ordered my alternator and SCIB bank waiting for it to be shipped and im trying to find a good 8-12k amp that will run around 16 volts and not go into protect can you please give me your best recollection
@@JerryAintloud Hey Jerry, Quick question- would you say it's safe to wire this amp to 0.5ohms or is that at all risky? I'm looking to buy one to push 2 Sundown Xv3-18s.
If your at 1 ohm and it read 1.6 your rise is .6 correct not 1.6.? Cause your amps are rated for 1 ohm so if it read 2.0 ohm at 30 hz. Amps rated at 1 ohms so you got 2.0 your rise is a full 1ohm above rated. Or I’m wrong and you start rise from 0.
Lol some legit amps those hooligans ko are beasts look at there size for a Korean amp they have to be the smallest 8k Korean on the market. Nasty number on a solid electrical probably do 8k at 12 or 14 volts.
@@bailey2517 you get more power but you're inefficient. Probably a narrow bandwith and a peaky build. Rise is your friend. I have 6x rise in my build. Wide bandwith and loud AF on low power. 62's on less than 9k clamped.
I like the low tuned windy builds alot better. It puts a smile on people's face.☺ The high tuned builds gives people the pain face.😣
@JerryAintloud- When you burped 45Hz, and got 11k on your Amm-1, i noticed your voltage meter on your amp, only dropped down to 15.1volts! Thats 33k of total power @ 45Hz, and your battery bank held 15.1volts= Awesome!
Did anyone hear how fast his starter cranks got to love that high voltage
Yes sir
Great Vid bro...box rise is good to know on burps & music.
I watch all your videos man! I'm really impressed with these DS18 amps. I was set on getting some of those JP amps, now I have some thinking to do.
Hell I love the longer videos man! And I’m very impressed with those amps! That was stupid crazy lol
Love the Lows... Tap Out seems high school 🏫 antics... I build for 20-60hz myself... daily driving less than 140db
I may have made mention of the AMM 1...✋ I said it lol 😆
Awesome video. You just thought me something I really needed to know. Trying a budget build and I'm using all the good advice to make wise selections. Thanks 👍
Jerry you need to do the same clamp test on all 3 amps. Positioning of subwoofers may have a different load on the amp and this cause all 3 amps to have different outputs
Really good content! We have the hko5k! It does pretty good!
The lower the resistance, the more volts it will consume. So when u burp at 20hz you got 6600 watts because it lower your voltage down to probably 14v to 15v at 1.6 ohm. When you above 30hz, your are at 2 ohm or more, so your burp is 8000 watts or higher because your voltage is likely above 15v to 16v.
my voltage never drops below 15.5 if it would i'd panic..
@JeryAintloud- @24:41 into this video, you made 3,010 watts, @ 2.1 ohm's, playing your demo song. So 9k total.
Should have came to audiolypics! I would of loved to have gotten a demo from ya! Saturday started a little slow but picked up in the afternoon, and some amazing builds yesterday
i wish I could have
Impressive numbers 🤙
I'm going to do some testing with Chaz upcoming weekend with amm 1 he sold me a subwoofer so giving him a chance to see how it performs can't wait to see the results on a smart 5k on music
I seen 3010 on musical
Very nice great video man.
Im definitely glad im built to play lows i can play 17hz full tilt (maybe lower haven't tested) smart5k per sundown xv3 so plenty of power lol
Nice bro demo/video. I feel the same way bout da Tap Outs as u do,low FREQUENCY is way better but that's my opinion. Dude I'd enjoy da hello outta hangin wit cha and pickin ur brain bout a few things. Just by this short video u tought me a couple things that I did not know, thought I did but in reality did not(well was wrong bout it)LOL. A few states below me if not I mi8 been able 2 lol,I'm n TN(30mins from B-MOTOR SPEEDWAY). But hellz yea brotha keep da good videos going ima go back and watch ur other 1s(around 16mins I liked and subscribed 2 ya lol)stay safe loud bass all day eryday lol.
thank you.
Worst I’ve sat in was like 158 at 50 something for 30 seconds. That was rough. Also got a little 164 burp at like 38 at a show. Never tapped but I can understand why people do after experiencing that.
My last build was tuned to 60hz and hit 156.8db but there was no way anyone could stay in there for longer than a few seconds it was painful when the bass hit you.
@@lowriderbug 156.8db was painful?? Even for 60hz, i'd expect that to be fairly tolerable. I wonder if i could hit 155db at like 50hz with 2 big 18s now. That would be dope.
Someday I hope to join the big leagues with you buuuuuddy. Much love.
This is great man!! I swear just hours ago I was searching RUclips for vids on your DS18 amp. I have a AAB 7900.1 and I have always ran Koreans before I bought this 7900.1. I'm seeing all these deals on amps right now and I'm wondering if I should snag a Korean and ditch the full bridge AAB 7900.1 Deaf Bonce. Basshead problems like always Jerry lol
i love these DS18 amps.. they are strong, if you find a nice price go for it
@JerryAintloud update I just bought a Hooligan 8k today! I've been Deaf Bonce and ended up getting an aak-6000 and it was too long for my system build. So I was stuck and had to use their aab model amps for a hot minute. I'm running 2 custom sundown 12s but I've got 2 V2 Banhammers that I can run at half ohm vs the sundowns running at 1 ohm. .. idk I'll get to the Banhammers eventually lol, no rush for now I'm enjoying the custom built sundowns
Every time I watch it, I'm impressed even more. I'm so elated I snagged one of those amps. It's on the way. Ordered off Amazon thru ds18 and it got canceled. Every car audio site is sold out, except d4s.... so I had to order from jp. I wanted to wait for black Friday but man my luck I'd wait and then couldn't find one
I like 27hz-50hz with authority anything below 25hz is just ridiculous not even music at that point I said what i said ,i want to feel the music
Good content talk about and show real numbers hurts a lot of grown men’s feeling. Especially when you switch to music and seen you only did like 1900. Also don’t forget you are running at 15.5 to 16 volts and your amps are rated at 14.4. 1 to 2 volt makes a lot of difference. So running at 1.6 ohm and making whatever power is only about 2/3 the of the equation. Still a good video keep them running man guys like you and EXO are real people who ain’t afraid to show what they know.
Thank you
@@JerryAintloudhey I have a Chance to get one of these amps today for 650 should I jump on it ?
But it is used….
@@gavinmcclure8047yes dude that's less than half price brand new I hope you got that when you had the chance
They say the built in cl ipping indicators on most amps arent real reliable. I would believe your amm1 over the amp...crazy how impedance rise isn't linear.you would think it rise with freq and that was the case until you did 40hz...lol good content Jerry
An amplifiers built in clip detection monitor is actually very reliable for most quality amplifiers. But they are usually set just a tad more conservative though.
thank you, I learned a lot doing this..
I have down for sound shop amps and the clip indicator is pretty spot on, in fact the bass knob clip comes on slightly before the amp I clip indicator.
Interesting, Thank You! What makes an enclosure efficient... and how can it be tested?
it's trial and error.. and lots of testing
What’s the song at 24:23?
Alien party but I slowed pitch
Question... i drive 2015 toyota corolla s , it had a stock 120 amp alt that charged at around 14.2v - i upgraded to a 320 amp JS and cant get above a 3.6- 3.8charge? is this normal or is something wrong?? i just want my stable 14.2v charge back and id be happy ..im running 2 dc level4 12's d2 ohms on a sundown sfb8k wired at 2 ohm there is a Toro 4 channel running my doors and and back dash speakers, got a xspower under the hood and a D4s LTo 6.0 in the back all1/0 upgrades as far as big3/4 and all that so everything i feel is done right but i dont understnad why im seeing lower voltages now than i was on a more stock electrical system..and do you think that may be adding 1 diode might get my to the 14 im looking for?
I’d contact JS and see what they recommend first
@@JerryAintloud I did im waiting on a reply..does this sound weird to you?? Wouldn't you think it would at least charge at the same amount as the stock alt at least?
wired at .5 have u seen it go lower? like .1 ohm? im wired at .4 rise to 1 or more
this testing was done wired at 1 ohm.. normally I have 4 amps wired @.3
Jerry you should come to mobile and help me build a box in my 99 suburban for 6 15’s
Get camera angle we’re you can show voltage when you get the 11k. Wonder why music ohms are so much higher than a frequency burp that’s crazy. Amp shouldn’t never blew at those ohm loads
Hi Jerry, I really need to get in touch with you. I got some issues with my system, I have tried explaining it on the comments once but that didn't seems to get through to you. Do you have a mail address so I can explain it to you. Big fan of your RUclips page. Regards Deon
me email is in me profile on here
I tap out about 15k rms. I lasted about 1 minute this coming from guy with 5k rms in my daily driver
Are there certain brands that run better than others at higher voltage just ordered my alternator and SCIB bank waiting for it to be shipped and im trying to find a good 8-12k amp that will run around 16 volts and not go into protect can you please give me your best recollection
What do you have your temperature sensor set to turn your fans on?
none they are on a button
@@JerryAintloud what temperature is too hot for amps?
If you are rising 1.3 to 2, why is 0.67 ohms too low? 0.67 ohms should rise to 1 to 1.8 ohm.
was strapped @.67 which put each amp @.33
@@JerryAintloud Hey Jerry, Quick question- would you say it's safe to wire this amp to 0.5ohms or is that at all risky? I'm looking to buy one to push 2 Sundown Xv3-18s.
If your at 1 ohm and it read 1.6 your rise is .6 correct not 1.6.? Cause your amps are rated for 1 ohm so if it read 2.0 ohm at 30 hz. Amps rated at 1 ohms so you got 2.0 your rise is a full 1ohm above rated. Or I’m wrong and you start rise from 0.
you could tell that I was second guessing myself on that
Lol some legit amps those hooligans ko are beasts look at there size for a Korean amp they have to be the smallest 8k Korean on the market. Nasty number on a solid electrical probably do 8k at 12 or 14 volts.
Less rise = Less efficiency. You don't need to be wiring amps down with this low of rise. Possibly why you're sending amps.
this
Wait what do you mean? Wouldn't less rise mean it gets louder because you can get more power from the amp at a lower ohm load?
@@bailey2517 you get more power but you're inefficient. Probably a narrow bandwith and a peaky build. Rise is your friend. I have 6x rise in my build. Wide bandwith and loud AF on low power. 62's on less than 9k clamped.
@@DibeezyTheGifted that's good to know! I just learned something new 😆