I know it feels good to be back. My Lithium went out for service. It get home tomorrow, went from 80ah to 120ah. Also got an 400amp 14.8volt alternator on the way, replacing my 250amp alternator. I can't wait.
Man I bet that's a awesome awesome feeling. Man I can't wait to get my big build going. Don't know how to do a big big build but I'll figure it out. Glad to see jangalang back playing. Keep the videos coming you and Debb both are doing a great job and thank you to the both of you
The original CAB45s needed a strapping module but the CAB22's and newer CAB45s strap normally, I ran a pair of CAB22's strapped at .8 per amp for a while and were great amps until i needed a little more power.
Happy for you. Just upgraded from a single kicker 10 and alpine 500 watt amp to 2 of decent memphis 12's(if there is any) and of the alpine mrv-m500's sounds pretty good for what it is. I'm happy so I know you are.
Jerry I know you're all about budget builds, but something that would be sweet for your space saving cooking to look into is gpu cooking blocks for computer desktops. Not sure how comfortable you would be with liquid cooling but if you use the mineral oil it will have way less chance of shorting out anything if it ever leaked sense they literally fully submerge full main boards in that liquid for cooling. Just a near though for cooling idea then you could hide the radiator on the outside of the Jeep underneath and pump all the heat to the outside, pumping the heat outside is what I was getting at in to long of a description My bad.
So glad to see the Jeep up and playing again, and I know you definitely are. Just a thought, but if you have anymore issues with those amps, maybe hit up Colin, and see about those Surge Audio amps of his. They're very impressive and .5 ohm stable.
When checking amp voltage on the amps you go till clip light back it off than check the speaker terminals with ac volts on amps with a volt meter correct . Than set the pair at the lower ac volt reading you get correct to gain match. Don’t dd m series need some kind of strap box?
I can concur those ds18 hooligan korean-built amplifiers are some very well-designed amplifiers. Ds18 went out of their way to add on top of the design they chose you will never see unless you open it up, it is the first time I've ever seen mosfet clamps with heatsinks on them even the voltage regulators are bolted to heat sinks a lot of thought went into making these amplifiers reliable and as a practicing repair Tech I can appreciate the extra effort. It is important for people to understand just because an amplifier fails does not necessarily mean that there is a flaw in the design I'm sure Jerry will tell you the failure is more than likely user error. However with all of that said the tweets that have been made to this circuit Imo do not account for added cost of these boards, you can get the same Korean circuit from a another company for hundreds of dollars cheaper it is all user preference
Have you any experience with deaf bonce aak amps? I just got an aak 4000.1 and am going to run it at .5. Hear they're really well built but would like your input. Thanks
@@BeSome1 have you clamped it at .5? I'm curious what it'll do. Thank you. That's awesome! I'm really impressed with it so far. I'm at 1 ohm currently on two Sundown SA Classic 12s.
That feeling you get when you can finally beat down the road. Looks good as new.
That is some serious power there.
Jangalang has some bangbang again!!!!!!
Man I know y'all are super excited!!! Looking good 👍 👌
Yep, this is going to be a fun channel to watch!!
I know it feels good to be back. My Lithium went out for service. It get home tomorrow, went from 80ah to 120ah. Also got an 400amp 14.8volt alternator on the way, replacing my 250amp alternator. I can't wait.
Hell yeah Jerry!!! I got the biggest smile on my face seeing that iconic beard trickin' on the fresh sub break in 😃
Looking good Jerry
Hell ya got it banging again
Awesome video
YES SIR! BACK BASSIN!
Nice! Thank you for being real.
Back in business 🤘
Btw I got a drag 2 too lol it's my secondary mod
This is my back up and currently main mod
Good to see you have a co pilot that loves bass . I'm a bass head too old school ftw
Man I bet that's a awesome awesome feeling. Man I can't wait to get my big build going. Don't know how to do a big big build but I'll figure it out. Glad to see jangalang back playing. Keep the videos coming you and Debb both are doing a great job and thank you to the both of you
The original CAB45s needed a strapping module but the CAB22's and newer CAB45s strap normally, I ran a pair of CAB22's strapped at .8 per amp for a while and were great amps until i needed a little more power.
Awesome build
Happy for you. Just upgraded from a single kicker 10 and alpine 500 watt amp to 2 of decent memphis 12's(if there is any) and of the alpine mrv-m500's sounds pretty good for what it is. I'm happy so I know you are.
We got bass! 🤙
Finally got me a 152db on 2 12s 😁
That’s a great score
@@JerryAintloud went from a slot port to aeroport. AEROPORT FTW! 😁
Good to see you back slamming man!!!🔊🔊🔊🔊
I bet you feel better about life now 👍 got your bass back
yes sir
Bad ass build jerry your the man
Its looking good an keep bassing on
#TEAMAINTLOUD🤘🏾🔊🔊🔊🔊
Good 2 c u back loved this vid start to finish 😂
Jerry I know you're all about budget builds, but something that would be sweet for your space saving cooking to look into is gpu cooking blocks for computer desktops. Not sure how comfortable you would be with liquid cooling but if you use the mineral oil it will have way less chance of shorting out anything if it ever leaked sense they literally fully submerge full main boards in that liquid for cooling. Just a near though for cooling idea then you could hide the radiator on the outside of the Jeep underneath and pump all the heat to the outside, pumping the heat outside is what I was getting at in to long of a description My bad.
So glad to see the Jeep up and playing again, and I know you definitely are. Just a thought, but if you have anymore issues with those amps, maybe hit up Colin, and see about those Surge Audio amps of his. They're very impressive and .5 ohm stable.
After all the racism stuff associated with Colin I couldn’t even support Surge
When checking amp voltage on the amps you go till clip light back it off than check the speaker terminals with ac volts on amps with a volt meter correct . Than set the pair at the lower ac volt reading you get correct to gain match. Don’t dd m series need some kind of strap box?
Yes that’s how I gain match, not sure on the M series strapping
What's the break in time on them🔊🔊
Probably 30-40 hours
Thats a bad azz setup, hey Mr. Jerry which rcas you use? There's so many different ones
Hey Jerry where did you get these amp fans I really like the style and how it sits right on the amp for cooling
Why you switch the taramps
Swapped over a year ago
I can concur those ds18 hooligan korean-built amplifiers are some very well-designed amplifiers. Ds18 went out of their way to add on top of the design they chose you will never see unless you open it up, it is the first time I've ever seen mosfet clamps with heatsinks on them even the voltage regulators are bolted to heat sinks a lot of thought went into making these amplifiers reliable and as a practicing repair Tech I can appreciate the extra effort. It is important for people to understand just because an amplifier fails does not necessarily mean that there is a flaw in the design I'm sure Jerry will tell you the failure is more than likely user error. However with all of that said the tweets that have been made to this circuit Imo do not account for added cost of these boards, you can get the same Korean circuit from a another company for hundreds of dollars cheaper it is all user preference
Have you any experience with deaf bonce aak amps? I just got an aak 4000.1 and am going to run it at .5. Hear they're really well built but would like your input. Thanks
@@850CANE interesting that you ask that. I am currently running that amplifier @ .5 ohm daily 😆
@@BeSome1 have you clamped it at .5? I'm curious what it'll do. Thank you. That's awesome! I'm really impressed with it so far. I'm at 1 ohm currently on two Sundown SA Classic 12s.
i've done great with these amps.. and yes, every one that blew was my fault
Hey jerry how mutch could i pay you to build one of those batteries for my system
Are those ds18 amps pretty good. Do they do rated power??
ruclips.net/video/BC-89ue_-c4/видео.html
jerry im having trouble properly crimping my 1/0 lugs what tool do you use to do them properly
a cheap hammer crimp tool works great, i have a few options in the amazon link in description
@@JerryAintloud appreciate it brother ima buy some of these and properly redo my system
i know how much you've missed that bass!!!
I have a strong feeling these subs are gonna get cooked, and fast.
Naw they’ll handle more power than the regular Genesys , and they did great
It's louder it goes to 11 Hahahaha
It's louder because it's one more than 10 Ha ha ha ha ha