Yeah haha, ours had been in the works since February I think! Though I had the idea for the past year now -- This was just a prototype for a terrifying human carrying version...
I feel like this project is going to be like the Lightsaber project, where they will create a single Mjölnir with every Mjölnir projects they've done. Of course, only the tech that they can fit into Mjölnir's size.
@@Gab-wr2ye Start from the video where James first attempted to create a lightsaber and then the next one until you reach the video where Mr. Beast tried one in person.
This is the Hacksmith I remember. Fun and quirky and real. Not manufactured humor, or forced lines, just a couple of friends having a good time. I hope to see more content like this in the future!
This build is awesome!! I'm sure both you guys and Stuff Made Here had to go through a lot of calbration to make it work like how its supposed to. it just goes to show the same mechenic can be used in so many different ways to achieve different things. Love you guys :D
I'd love to see a collab with these 2 absolutely fantastic creators. Although i do prefer Stuffs videos more since he's more indepth on the actual mechanics and what not. Hacksmith is way more "show off". (Still like them though)
Hey! Did you know God is three in one!? The Father, The Son, and The Holy Spirit! Bless him! Jesus died for our sins, rose from the dead, and gives salvation to everyone who has faith in him! True faith in Jesus will have you bear good fruit and *drastically* change for the better! Have a blessed day, everyone! ❤
Your worries (yes, anxiety), depression, suicidal thoughts, EVERYTHING will melt away and be NO MORE when you lean on God and put your trust in him! When I have physical pain, I literally pray and the Lord quells it, that I am healed! Know that there is power in the name Jesus Christ! His name casts out demons and heals! People are bothered by his name. The world hates the truth and wants to continue living sinfully! God's children are set apart (holy) and righteous.
@@Call_Upon_YAH i know you are just a bot most likely but my dad is a devote christian and still experienced severe depression. there isnt a miracle cure for these things. i dont care if you believe in god but dont go around saying shit like that.
We tried that. It's difficult to get it dialed in just right so that the cables don't go slack on the winches and tangle, but it also doesn't pull the thing out of your hand. This requires operating it in direct torque mode, which can lead to equipment damage if there's a communications fault, so I didn't spend too much time on it (although we certainly managed to break the winches in that time!) When you have the throw feature engaged, as built, it is backdrivable like you suggest, but then it measures the velocity when you disengage that button and launches.
Hey guys, great design but I have a suggestion. Maybe you could use magnets for the attatch an detach meganism, because if you just use elektromagnets you dont need to have holes in the hammer and the reattatching is 10 times easier. Idk if its doable with a robust design to still use it as a hammer, but ig you can always consider:)
Oh great idea James. Do you think you could bring up some thing like this for my surgical instruments? But maybe not my scalpel. Anything but my scalpel!
Visit our store and get a mini-saber! www.Hacksmith.store Plus if you become a RUclips member you'll get exclusive discounts AND see our videos early: ruclips.net/video/V8UEiHr0DTc/видео.html (the giant Thor Hammer build)
damn it's been a while since I've watched a video of this channel, it's so nostalgic. Remember being obsessed with this when i was a kid lmao those were truly the best times.
For the release mechanism, you could attach the hammer to the strings through an electromagnet and write a piece of code that would turn off the electromagnet, releasing the hammer, when the strings approach the target.
"releasing the hammer when it approaches the target" That sounds like a complex slingshot that could launch a 15lb weight at 30mph. Maybe a release once caught like the table one. But not on approach.
Imagine if someone tried to break into the hacksmith warehouse. It would be terrifying for them considering the worker's unlimited access to odd weaponry.
Random thief: "Holy shit, does a supervillain live here?" James: "Not yet. Give it another few years." Also James: _summons Mjolnir with one hand, ignites a lightsaber with the other, and rises up into a gigantic Powerloader mecha_
I mean, to be fair, as awesomely cool as all the Hacksmith stuff is, the forces and speeds involved with *actual* weapons are incomparably insane. Worth keeping in mind the distinction between an engineering toy / practical effect versus real weapons.
Hey! Did you know God is three in one!? The Father, The Son, and The Holy Spirit! Bless him! Jesus died for our sins, rose from the dead, and gives salvation to everyone who has faith in him! True faith in Jesus will have you bear good fruit and *drastically* change for the better! Have a blessed day, everyone! ❤
Your worries (yes, anxiety), depression, suicidal thoughts, EVERYTHING will melt away and be NO MORE when you lean on God and put your trust in him! When I have physical pain, I literally pray and the Lord quells it, that I am healed! Know that there is power in the name Jesus Christ! His name casts out demons and heals! People are bothered by his name. The world hates the truth and wants to continue living sinfully! God's children are set apart (holy) and righteous.
Iron man suit The magnetic field can be used to generate electricity. Metals such as copper and aluminum have loosely bound electrons. Moving a magnet around a wire or moving a coil of wire around a magnet pushes electrons into the wire and creates an electric current. Make a magnetic tray and place copper coils on it from time to time. As you walk, the copper coil moves back and forth across the magnet to store energy. Then all you have to do is save energy. All you need is a storage device for this. We made a suit out of thousands of tiny gears that work like clockwork when we walk. We used our motion to rotate each small magnetic gear and placed as many copper coils as possible on the sides of the suit. This allows you to capture as much energy as possible. It's not the coil size that matters, but how many coils in each coil can produce the most power. The installation allows you to build an internal power supply line that feeds the internal generator.
I too did the hammer of thor on the occasion of the release of the film, I can not compete with your good but slowly I too am finding some space in this platform ... great you, as always
This is literally one of the coolest things I’ve ever seen! These guys are incredible at what they do. I’m literally blown away they pulled this off…. I’m speechless! 😱 So sick!!🔥
Great build! Y'all should absolutely rig a 3D printer to your cable system to make a room sized 3D printer! It'd be a great opportunity to go over how a printer works in detail while being absolutely ridiculous
@@crazybird199 idk its similar to a delta 3d printer, so the code wouldn't be that hard. The main problem I see is print time, as to make use of the full area you would need either a very long print or a very large nozzle, and it doesn't look like the system could easily support the weight of such a large nozzle (and tube leading to it) Eventually by tweaking the design to be more feasible you would end up with something like the full house 3d printers, which already exist.
@@theneonbop No Elijah is right, with all the oscillation in the cables and inaccuracy of the winches 3D printing with this is pretty unachievable if you want accuracy finer than about 10cm. They commented above that they had to calibrate everything before each shot of the hammer flying here and it would drift out of calibration the more it moved.
@@TimSheehan you could probably avoid the recalibration with better encoders or a better design, and as long as you are printing slowly I don't think oscillation would be a problem
That looks awesome, it's amazing to see how a few invisible ropes can be used to achieve such amazing feats. I remember seeing someone on RUclips making a basketball hoop that always catches the ball, anywhere in the room. Maybe if you guys use that wiring trick with sensors on hand, it would be even better. I'm no engineer, sorry if my assumptions don't apply here. Stay Cool
It would be cool to see a version with an electromagnet on the gantry. Then you remove and reconnect the hammer multiple times. You could also use it for other projects as well. (Like force pulling a lightsaber)
Man this would be so cool for practical shots on a film set like imagine what filmmakers could do with stuff like this. Have you guys ever considered looking into that kind of thing as a service your company could provide for film studios?
Would be easier to just cgi it or animate it in some way. Rather than all the physical issues and limitations of doing it physically. Plus directors always change stuff last minute and it would be faster to fix those things on a computer
This is awesome! Out of curiosity, would an electromagnet of some form have worked for the release system from the winch lines? I feel like that would make it a bit easier to reattach the hammer. Either way, looks sick!
@@hacksmith that’s a same😔. I was just about to ask if magnets could be used to reattach it. I suppose if magnets pulled the cable back into the locks and they locked back. But that would take way to long and have a high chance of failure I’m sure. If there was a way you all would figure it out. Great job👍🏻
You could make a frame that all three cables are attached to, so that the magnets wouldn’t need to resist the strain from the cables pulling against each other, just the weight and inertia of the hammer
@@hacksmith Is it possible to make a lighter hammer with repelling magnets that function under very specific circumstances and move in directions wit drones? This could be like a primitive version of a Thor's Hammer that works fully with magnets similar to many magnet trains seen around the world. Amazing video btw
just a personal thought that came to mind, that would make the release system easier to reattach. steal the magnets from the hammer that uses the ring to release the magnet, and keep the metal ring from testing the cable system. have one in the top for catching and one in one of the faces for having it fly. me no know, just something that i was thinking about watching this.
I'm so glad to see y'all still making videos! I just bought your shop coat for use in welding school, hasn't been delivered yet, but I'm sooo happy y'all are still around! Edit: look mom I'm famous! The Hacksmith liked my comment!
« Any sufficiently advanced technology is indistinguishable from magic. » I feel like this series is proving that. Imagine a real-life Mjolnir with all those different engineered capacities combined...
Who says Asgardian abilities aren't real?! This was so awesome!!!!!!!!!!! Even better than your other thor projects!😆😆😆 Also, I just saw Thor love and Thunder yesterday, and I loved it!
How useful would this be for like painting the walls or repairing things in the shop? You could just attach yourself to one of these and use a remote control to fly around the building.
So I'm weird and am gonna comment on the tool first: that screwdriver you use is pretty cool. Reminds me of those pens with 3 or 4 color inks you could just click between. Wonder if that's what inspired the guys who made it. The wire system Charles came up with looks awesome, grats on all that hard work turning out great!
Looking past the cable system, am sad they connected it via cable to said cable system, rather than some form of magnetic lock. Would be much easier to attach and detach, possibly allowing more fluid and complex handling. Might even have been able to allow the system to re-attach by itself mid-air, how cool would that have been?
In terms of the cable release mechanism, I feel like it would have been easier managed by using electromagnets instead of an internal solenoid that has to be reattached every time. Then you just engage the magnets when you want to put it away. Maybe even just static magnets that's strong enough to hold the hammer so there's no constant electricity. But idk I can say it, but it's probably easier said than done
Love perfect balance of things you make and the humor in each video especially this one with all those other Thor's hammers 😂. Did you happen to make a Mjolnir to actually use on an anvil?
Imagine someone pulls up to the warehouse at night and it’s dark so you can’t see the cables and James just telepathically summons mjolnir through the air infront of the intruder. PTSD for life lol😂
Glad another upload is out! I've been missing you guys doing regular videos, but I'm sure there's a good reason, haha. Thor 4 was a great movie, so this was awesome too! (That StuffMadeHere video was super funny too lol)
While this would reduce the invisibilty of it, what if you created a sort of rig (perhaps a disc or something) to attach all 3 cables to. Have a single rod coming off of this with a single entry point into the hammer to secure it. That way, you could reattach the hammer with ease and keep all the cables connected to that disc/rod system. :) Love it either way!
Im not an engineer or so, but wouldnt it be possible to make the retractor with elektro Magnets, so that it isnt visible so much. And you could stop the electric current? That could work with your disk mechanic?
5:11 that is a great way to detach the cables but wouldn’t it be tedious to reattach them each time? I tough that maybe there could be a small transparent mount on top of the hammer that could detach when needed but it would still keep all 3 cables in place so that the hammer can be easily reattached. The idea with the hammer that comes to you is still really cool lol so great job!
I can see this as a prop can be used on movies something, instead of relaying heavily on cgi, they can use this like that. Idk though if there is some rig or something that other movie production use, but this one might be good though.
I wonder if the hammer could accelerate enough to make you fly, or at least, make you skate faster. Sure that would need thicker cables. Thank you for the video!
It is big but could have a bigger one especially since you made the thor hammer zipline thing. Could use more space and room to have bigger ideas and projects
I think the release system would have been better if you added electromagnets inside the hammer, and then put small magnets on the ends of the wire. Then you wouldn’t have to take the hammer apart to reset it every time.
You fellas are insanely amazing! I don't know if you've done this or not, as I seem to recall you strapping a jet to a boat before, but have you made a boat stylized like the dinghy in Treasure Planet? I would be absolutely crushed in the awesome presence of it and I think it'd be an interesting theme with all your other futuristic gadgets and equipment! (And I'm just a total Disney geek. Treasure Planet's one of my favorite movies.)
That's why Marvel tends to use who many CGI. Practical effects take way much effort and money to make and look less impressive in many cases. On the other hand, when applied carefully, practical effects can make the whole picture a lot better. It's just a matter of balance between them that works best. Thanks to the whole team for making that video and good luck with your future projects.
The idea of putting a camera on that system and make Jarvis auto-track people is interesting as well. Also could you make it strong enough to hold a person ? Like, you know, "Oh I want to go to there other side of the building but I'm too lazy to use my legs. Well I'll just use my arms instead and hold on to the hammer". Oh ... just so in another comment that you had the same idea. Well ... ok, hyped for that !
That’s pretty ironic that we both made room scale cable robots at the same time. I like how your winches are essentially giant fishing reels 🎣
Yeah haha, ours had been in the works since February I think! Though I had the idea for the past year now -- This was just a prototype for a terrifying human carrying version...
I saw this one and IMMEDIATELY thought "Hmm I wonder if they collaborated on making these?" Great job to both of you!
These inventions should battle, hammer v basketball hoop
lol I thought the same thing
Ayo your basketball hoop and Hacksmith's mjolnir is definitely awesome
The entire Hacksmith team are insane! Love the videos guys
Yea!
Are you a real egg?
It’s the egg!
ya like the egg but not the guy who makes ya iron man progect possible
True dat
The Thor's hammer series is fantastic, glad to see another addition!
these will make a fine addition to his collection
𝗗𝗼𝗻'𝘁 𝗿𝗲𝗮𝗱 𝗺𝘆 𝗻𝗮𝗺𝗲.....
u mean username and sure i wont look
@@aykedfan6940Naruto fan
I feel like this project is going to be like the Lightsaber project, where they will create a single Mjölnir with every Mjölnir projects they've done. Of course, only the tech that they can fit into Mjölnir's size.
whats the video where they fit all lightsabers styles?
@@Gab-wr2ye Start from the video where James first attempted to create a lightsaber and then the next one until you reach the video where Mr. Beast tried one in person.
Give me that hammer!!!
This is the Hacksmith I remember. Fun and quirky and real. Not manufactured humor, or forced lines, just a couple of friends having a good time. I hope to see more content like this in the future!
I still see it prettymanufactured and forced in a way tbh
I saw the beginnings of cameraman PTSD there.
3:55
Clutches nose in pain despite hammer being nowhere near it
guys watch the whole thing in .25 speed lol
@@ndjxisjenxjix9525 yeah it’s pretty much that because they make things
Always love the hammer series, so many cool abilities!
welp reality is dead
#
Yes
Yea!
Engineering can make a lot of things possible
My favorite ability is H E A V Y
This build is awesome!!
I'm sure both you guys and Stuff Made Here had to go through a lot of calbration to make it work like how its supposed to.
it just goes to show the same mechenic can be used in so many different ways to achieve different things.
Love you guys :D
I'd love to see a collab with these 2 absolutely fantastic creators. Although i do prefer Stuffs videos more since he's more indepth on the actual mechanics and what not. Hacksmith is way more "show off". (Still like them though)
@@singhtv1911 I will wtf will u do
Hey! Did you know God is three in one!? The Father, The Son, and The Holy Spirit! Bless him!
Jesus died for our sins, rose from the dead, and gives salvation to everyone who has faith in him! True faith in Jesus will have you bear good fruit and *drastically* change for the better!
Have a blessed day, everyone! ❤
Your worries (yes, anxiety), depression, suicidal thoughts, EVERYTHING will melt away and be NO MORE when you lean on God and put your trust in him! When I have physical pain, I literally pray and the Lord quells it, that I am healed!
Know that there is power in the name Jesus Christ! His name casts out demons and heals! People are bothered by his name. The world hates the truth and wants to continue living sinfully! God's children are set apart (holy) and righteous.
@@Call_Upon_YAH i know you are just a bot most likely but my dad is a devote christian and still experienced severe depression. there isnt a miracle cure for these things. i dont care if you believe in god but dont go around saying shit like that.
Instead of detaching the cables, it can detect when someone is holding it and the cables can almost act as a support. Just like the throw feature.
Imagine if they tried to make lethal weapons
We tried that. It's difficult to get it dialed in just right so that the cables don't go slack on the winches and tangle, but it also doesn't pull the thing out of your hand.
This requires operating it in direct torque mode, which can lead to equipment damage if there's a communications fault, so I didn't spend too much time on it (although we certainly managed to break the winches in that time!)
When you have the throw feature engaged, as built, it is backdrivable like you suggest, but then it measures the velocity when you disengage that button and launches.
The whole team was so great to meet! So willing to share advice and cool facts about all these amazing projects!!
While it's not what I was expecting, it's still one of the best thor hammers you've made so far.
𝗗𝗼𝗻'𝘁 𝗿𝗲𝗮𝗱 𝗺𝘆 𝗻𝗮𝗺𝗲,,,
@@singhtv1911 aight
Agreed, not what I was expecting either haha
Definitely not what I was expecting, but still cool nonetheless.
Hey guys, great design but I have a suggestion. Maybe you could use magnets for the attatch an detach meganism, because if you just use elektromagnets you dont need to have holes in the hammer and the reattatching is 10 times easier. Idk if its doable with a robust design to still use it as a hammer, but ig you can always consider:)
Feels like in the near future Marvel will not require props 😅. This guy and his team are amazing people
these guys should be doing practical effects for films. They're substantially better than most doing it today
Do you watch “Knights Watch” by chance?
Same thought
XD
CGI is cheaper
Old school special effects look better on film. It's truly a lost art due to overuse of CGI.
Having worked on stuff like this before, I have to congratulate you on the fantastic 1st run calibration, that was absolutely insane. Good job!
Next week here: see how my real life Iron Man suit flies and attaches to every single part of my body.
first reply to a verified doctor :D
second reply to a verified doctor :D
third reply to a verified doctor :D
Fifth reply to a verified doctor :D
Sixth reply to a verified doctor :D
Oh great idea James. Do you think you could bring up some thing like this for my surgical instruments? But maybe not my scalpel. Anything but my scalpel!
👆👆👆 thanks for leaving comments behind text me I got a present for 🎉🎉🎉🎉🎉.....
Visit our store and get a mini-saber! www.Hacksmith.store
Plus if you become a RUclips member you'll get exclusive discounts AND see our videos early: ruclips.net/video/V8UEiHr0DTc/видео.html (the giant Thor Hammer build)
hello
You can make the harrys wand by using the method of lighting thors hammer
Usopp:giant? Ha don't make me laugh
SUGGESTION
Please make a Ghostbuster proton pack
Hey I have an suggestion for the next thing you guys should make what about the plasma cutter gun from dead space
damn it's been a while since I've watched a video of this channel, it's so nostalgic. Remember being obsessed with this when i was a kid lmao those were truly the best times.
For the release mechanism, you could attach the hammer to the strings through an electromagnet and write a piece of code that would turn off the electromagnet, releasing the hammer, when the strings approach the target.
That is a great idea. The only problem might be the strength of the electromagnet. But that being said they should try that
@@camtron1967 Yeah!
That is possible
"releasing the hammer when it approaches the target"
That sounds like a complex slingshot that could launch a 15lb weight at 30mph. Maybe a release once caught like the table one. But not on approach.
@@Joshua-jk1om i think it should release with a sensor so when the person makes contact with the handle it detaches
impressive project 👏😎
Yes
Will this blow up?
hahahahahahahahahahhhahaahahahhahahahhahahahahahahahahhahaahhahaahhahahahahaahhaahahhahhahahahahahahhahaahhahaahahahahhahahahahahahaahhahahhahahahahahahahahahahahahaahahhahhahhahhahahahahahhhhahahahahhahahahahhahahahahahhahahahahhahhahahahahhahahahhhahahahahahahahahahahahahahahahahahahahahahahahaahhahahahahahahhahahahahahahahahahahahahahahahahahahahahhahahahahahahahhahahahahahahahahahahahahahahahahhahahahahahahahahahahahahhahahahahahahahahaahh
Imagine if someone tried to break into the hacksmith warehouse. It would be terrifying for them considering the worker's unlimited access to odd weaponry.
Breaks in. Gets burned to death by a plasma sword
imagine trying to go through one of the doors until a literal lightsaber stabs through it, narrowly missing you
Random thief: "Holy shit, does a supervillain live here?"
James: "Not yet. Give it another few years."
Also James: _summons Mjolnir with one hand, ignites a lightsaber with the other, and rises up into a gigantic Powerloader mecha_
I mean, to be fair, as awesomely cool as all the Hacksmith stuff is, the forces and speeds involved with *actual* weapons are incomparably insane. Worth keeping in mind the distinction between an engineering toy / practical effect versus real weapons.
@@OverkillDM thanks captain buzzkillington
It’s crazy how they went from simple Wolverine claws to being able to summon Thor’s hammer and building a literal lightsaber!
Edit: mom I’m famous
_Multiple_ lightsabers.. They had to make another pair for a Mr Beast team-up
𝗗𝗼𝗻'𝘁 𝗿𝗲𝗮𝗱 𝗺𝘆 𝗻𝗮𝗺𝗲,,,,
👌
As they always say, they’re PROTOSABERS not actual lightsabers yet...
I remember, how fast the time flew by
Great furst video back guys! I hope the hammer is just a permanent feature of the shop for anyone who needs a confidence booster throughout the day😂
Well expect Chris...
Hey! Did you know God is three in one!? The Father, The Son, and The Holy Spirit! Bless him!
Jesus died for our sins, rose from the dead, and gives salvation to everyone who has faith in him! True faith in Jesus will have you bear good fruit and *drastically* change for the better!
Have a blessed day, everyone! ❤
Your worries (yes, anxiety), depression, suicidal thoughts, EVERYTHING will melt away and be NO MORE when you lean on God and put your trust in him! When I have physical pain, I literally pray and the Lord quells it, that I am healed!
Know that there is power in the name Jesus Christ! His name casts out demons and heals! People are bothered by his name. The world hates the truth and wants to continue living sinfully! God's children are set apart (holy) and righteous.
Iron man suit
The magnetic field can be used to generate electricity. Metals such as copper and aluminum have loosely bound electrons. Moving a magnet around a wire or moving a coil of wire around a magnet pushes electrons into the wire and creates an electric current. Make a magnetic tray and place copper coils on it from time to time. As you walk, the copper coil moves back and forth across the magnet to store energy. Then all you have to do is save energy. All you need is a storage device for this. We made a suit out of thousands of tiny gears that work like clockwork when we walk. We used our motion to rotate each small magnetic gear and placed as many copper coils as possible on the sides of the suit. This allows you to capture as much energy as possible. It's not the coil size that matters, but how many coils in each coil can produce the most power. The installation allows you to build an internal power supply line that feeds the internal generator.
I'm glad you mentioned Stuff Made Here. He's also extremely talented and awesome!
you stole my words 🤣
I too did the hammer of thor on the occasion of the release of the film, I can not compete with your good but slowly I too am finding some space in this platform ... great you, as always
I think you have potential
thank you for the trust 😁
This is literally one of the coolest things I’ve ever seen! These guys are incredible at what they do. I’m literally blown away they pulled this off…. I’m speechless! 😱
So sick!!🔥
You should watch stuff made here
@@ligimolvarghese7480 Did I ever say I didn’t? 😂
Now all these guys need is Elon musk's budget and they could make a real life infinity gauntlet that can really make people disappear.
"So we made a real life quantum entangler that actually sends neutrons out designed to target exactly 50% of all life on earth..."
It’s amazing how far you’ve come i’ve been watching for 12 years now
Old Account
Great build! Y'all should absolutely rig a 3D printer to your cable system to make a room sized 3D printer! It'd be a great opportunity to go over how a printer works in detail while being absolutely ridiculous
That would be epic, but it would be incredibly difficult to code and set up.
@@crazybird199 idk its similar to a delta 3d printer, so the code wouldn't be that hard. The main problem I see is print time, as to make use of the full area you would need either a very long print or a very large nozzle, and it doesn't look like the system could easily support the weight of such a large nozzle (and tube leading to it)
Eventually by tweaking the design to be more feasible you would end up with something like the full house 3d printers, which already exist.
@@theneonbop No Elijah is right, with all the oscillation in the cables and inaccuracy of the winches 3D printing with this is pretty unachievable if you want accuracy finer than about 10cm. They commented above that they had to calibrate everything before each shot of the hammer flying here and it would drift out of calibration the more it moved.
@@TimSheehan you could probably avoid the recalibration with better encoders or a better design, and as long as you are printing slowly I don't think oscillation would be a problem
It's the hangprinter
4:10 Lucky he moved back in time!
That looks awesome, it's amazing to see how a few invisible ropes can be used to achieve such amazing feats.
I remember seeing someone on RUclips making a basketball hoop that always catches the ball, anywhere in the room. Maybe if you guys use that wiring trick with sensors on hand, it would be even better.
I'm no engineer, sorry if my assumptions don't apply here. Stay Cool
@sokin jon thats not an edit?
You guys make my day wherever I see a new video pop up. So many cool inventions that you guys have created.
I love how you always explain the things you are creating as if you expect us mortals to understand a word you say :D
It’s not that hard…
It would be cool to see a version with an electromagnet on the gantry. Then you remove and reconnect the hammer multiple times. You could also use it for other projects as well. (Like force pulling a lightsaber)
I had an idea like force push and pull but didn’t think about using it for the lightsabers that’s pretty smart and Would look sick to
That had to have been one of the cleanest intros I have ever seen on RUclips in a while.
I always enjoy watching the videos you guys make its always so entertaining and informative
I was just thinking to myself how I was in the mood for some Hacksmith
Great shoutout to Stuff Made Here
General kenobi!
Your move!
Man this would be so cool for practical shots on a film set like imagine what filmmakers could do with stuff like this. Have you guys ever considered looking into that kind of thing as a service your company could provide for film studios?
This kind of thing definitely already exists on big film shoots - they can even fly people with them
Would be easier to just cgi it or animate it in some way. Rather than all the physical issues and limitations of doing it physically. Plus directors always change stuff last minute and it would be faster to fix those things on a computer
Everything is possible when it comes to hacksmith industry😂😂😂😂😂😂😂respect 🙏 👏 👌 💯
They did it. After a full year after my request, they finally made it. Madlads.
This is awesome!
Out of curiosity, would an electromagnet of some form have worked for the release system from the winch lines? I feel like that would make it a bit easier to reattach the hammer.
Either way, looks sick!
Nope! It generates wayyy too much force. Even the cables were breaking! Magnets wouldn't stand a chance
@@hacksmith that’s a same😔. I was just about to ask if magnets could be used to reattach it. I suppose if magnets pulled the cable back into the locks and they locked back. But that would take way to long and have a high chance of failure I’m sure. If there was a way you all would figure it out. Great job👍🏻
You could make a frame that all three cables are attached to, so that the magnets wouldn’t need to resist the strain from the cables pulling against each other, just the weight and inertia of the hammer
@@hacksmith Is it possible to make a lighter hammer with repelling magnets that function under very specific circumstances and move in directions wit drones? This could be like a primitive version of a Thor's Hammer that works fully with magnets similar to many magnet trains seen around the world. Amazing video btw
Wow that’s a nice project right there. Next time try listening to the song “Dupe - International “ while u do it ☺️☺️
this video makes me happy a lot more real than a lot of people who try to make this kinda stuff
Thank for commenting, subscribing and showing love✔️💜you've won a prize contact the number above to claim.
love you guys been watching since day one, so much respect and love for everything you do!!!!!!
can we get this to one hundred likes or more????
I love how they declared the variable HitInBalls to false, Amazing!
4:16 look at the code, it says 'hitHimInBalls = False'
just a personal thought that came to mind, that would make the release system easier to reattach. steal the magnets from the hammer that uses the ring to release the magnet, and keep the metal ring from testing the cable system. have one in the top for catching and one in one of the faces for having it fly. me no know, just something that i was thinking about watching this.
I'm so glad to see y'all still making videos! I just bought your shop coat for use in welding school, hasn't been delivered yet, but I'm sooo happy y'all are still around!
Edit: look mom I'm famous! The Hacksmith liked my comment!
It’s gone because you edited :(
@@az1202 goddammit
I love you guys and stuff made here, the problem solving process is fantastic.
Dang dude how is every single video you put out a straight banger! Can't wait for the next one!
8:05 "with a couple, (Hundred)" that is my favorate line lol
Glad to see another fun and cool video, you are worthy 😎
« Any sufficiently advanced technology is indistinguishable from magic. »
I feel like this series is proving that. Imagine a real-life Mjolnir with all those different engineered capacities combined...
And this is inspired from a series that at some point treated its magic like really advanced science.
You guys made a mini Lightsaber?! THAT'S AWESOME! Also, LOVED watching the video, it was AMAZING! X3
These guys always take everything to the next level....Damn
Who says Asgardian abilities aren't real?!
This was so awesome!!!!!!!!!!! Even better than your other thor projects!😆😆😆
Also, I just saw Thor love and Thunder yesterday, and I loved it!
That wasn't even real, it was a string.
Imagine randomly lifting your hand in that workshop and suddenly a thor hammer floats towards you expectantly
No Italians aloud lmao they only talk with there hands
How useful would this be for like painting the walls or repairing things in the shop? You could just attach yourself to one of these and use a remote control to fly around the building.
So I'm weird and am gonna comment on the tool first: that screwdriver you use is pretty cool. Reminds me of those pens with 3 or 4 color inks you could just click between. Wonder if that's what inspired the guys who made it.
The wire system Charles came up with looks awesome, grats on all that hard work turning out great!
I love how now the hacksmith Is Just making magic real at this point
I mean, it was thor that said that magic is just science without an explination
Looking past the cable system, am sad they connected it via cable to said cable system, rather than some form of magnetic lock. Would be much easier to attach and detach, possibly allowing more fluid and complex handling. Might even have been able to allow the system to re-attach by itself mid-air, how cool would that have been?
yeah i was expecting them to have it connected by magnet because they have already made a hammer with magnets plus it would make way easier to detach
Your projects are just like dream comes true 😍😍 each and every video is amazing! Love form India
Thank for commenting, subscribing and showing love❤️💜you've won a prize contact the number above to claim.
Anyone gonna talk about how many Red Bull cans they had at 14:10 😂😂😂
Now to wait three years for an improved version lol - loved this build!
In terms of the cable release mechanism, I feel like it would have been easier managed by using electromagnets instead of an internal solenoid that has to be reattached every time. Then you just engage the magnets when you want to put it away. Maybe even just static magnets that's strong enough to hold the hammer so there's no constant electricity. But idk I can say it, but it's probably easier said than done
they already did that and its lame compared to this
Also, either an accelerometer or a touch/heat sensor would've been better to release the cables from the hammer.
Love perfect balance of things you make and the humor in each video especially this one with all those other Thor's hammers 😂. Did you happen to make a Mjolnir to actually use on an anvil?
Just imagine a Thor's Hammer security system.
People could be handed their weapons in case of emergency
@@Taha_A i figured they were thinking more along the lines of “trip the alarm, take mjolnir to the face”
@@gruchogaemer8692 could be both
@@Taha_A true
Imagine someone pulls up to the warehouse at night and it’s dark so you can’t see the cables and James just telepathically summons mjolnir through the air infront of the intruder. PTSD for life lol😂
id feel bad for anybody trying to break into hacksmiths industries, they could prolly become supervillains if they wanted to bro 😭😭
“Hithumanintheballs = false”
As someone who’s tried coding before, and as someone who’s also been hit in the balls, this cracked me up
The military needs this man
Thank for commenting, subscribing and showing love✔️💜you've won a prize contact the number above to claim.
Glad another upload is out! I've been missing you guys doing regular videos, but I'm sure there's a good reason, haha. Thor 4 was a great movie, so this was awesome too! (That StuffMadeHere video was super funny too lol)
Now we need a hammer that can make people fly 😂
This one probably can just needs a better handle and way stronger wires and moters
While this would reduce the invisibilty of it, what if you created a sort of rig (perhaps a disc or something) to attach all 3 cables to. Have a single rod coming off of this with a single entry point into the hammer to secure it. That way, you could reattach the hammer with ease and keep all the cables connected to that disc/rod system. :) Love it either way!
Im not an engineer or so, but wouldnt it be possible to make the retractor with elektro Magnets, so that it isnt visible so much. And you could stop the electric current? That could work with your disk mechanic?
@@hades3351 you said some very complicated stuff i do not understand
@@GumAddic There wasn’t any real complicated stuff.
The only thing you don’t understand is what electro magnets are
This is utterly badass
5:11 that is a great way to detach the cables but wouldn’t it be tedious to reattach them each time? I tough that maybe there could be a small transparent mount on top of the hammer that could detach when needed but it would still keep all 3 cables in place so that the hammer can be easily reattached.
The idea with the hammer that comes to you is still really cool lol so great job!
I can see this as a prop can be used on movies something, instead of relaying heavily on cgi, they can use this like that. Idk though if there is some rig or something that other movie production use, but this one might be good though.
cgi is easier to set up
8:55 having 3 thors in 1 movie be like... 😂
I would say i don't deserve this much fun but God we deserved to watch this kinda thing
0:45 Solid Meme behind you
I wonder if the hammer could accelerate enough to make you fly, or at least, make you skate faster.
Sure that would need thicker cables.
Thank you for the video!
I love how they make things that the military would literally wanna take as a war weapon
Absolutely amazing how yous come up with new ideas, ever thought about getting a bigger workshop. Can't to see more
This place isn't big!?
It is big but could have a bigger one especially since you made the thor hammer zipline thing. Could use more space and room to have bigger ideas and projects
Thor fans here⚡⚡
I think the release system would have been better if you added electromagnets inside the hammer, and then put small magnets on the ends of the wire. Then you wouldn’t have to take the hammer apart to reset it every time.
With a magnetic glove and a plasma globe in it for the lightning should be just the the real thing just not as far a distance
I'm curious if we will ever reach the point where multiple features of the previous hammers can be combined into a singular one or a few.
Its just a matter of how many views that would get.
100% favorite build so far
Is that a real Cyber Truck at 1:49? :o
We made it ourselves!
@@hacksmith sick
You fellas are insanely amazing! I don't know if you've done this or not, as I seem to recall you strapping a jet to a boat before, but have you made a boat stylized like the dinghy in Treasure Planet? I would be absolutely crushed in the awesome presence of it and I think it'd be an interesting theme with all your other futuristic gadgets and equipment! (And I'm just a total Disney geek. Treasure Planet's one of my favorite movies.)
So today at hacksmith they are building a hammer based of a Nordic god
And today at me I am struggling to build a desk...
That's why Marvel tends to use who many CGI. Practical effects take way much effort and money to make and look less impressive in many cases. On the other hand, when applied carefully, practical effects can make the whole picture a lot better. It's just a matter of balance between them that works best. Thanks to the whole team for making that video and good luck with your future projects.
I’d love to see a split saber (from Jedi fallen order) I mostly wanna see a staff that quickly and strongly attaches and detaches
Please make assassins creed hidden blade
7:49 im also coding in Python :D
Remember the guy who asked? No? Bc no one did.
This is the only channel that has 12 million subs and still manages to be underrated
Could you make the God of War kratos ax? I think it would be perfect.
👆👆👆 thanks for leaving comments behind text me I got a present for 🎉🎉🎉🎉🎉..
excited for ant man make it real
4:59 English please lol
The idea of putting a camera on that system and make Jarvis auto-track people is interesting as well. Also could you make it strong enough to hold a person ? Like, you know, "Oh I want to go to there other side of the building but I'm too lazy to use my legs. Well I'll just use my arms instead and hold on to the hammer".
Oh ... just so in another comment that you had the same idea. Well ... ok, hyped for that !
You guys are Canadian? I'm sorry man.. Tough break.