rebuild: obs engine rta (.22 ohms)
HTML-код
- Опубликовано: 27 сен 2016
- official music of the tjvapes channel!
everydayghost.com/
pick up the engine!
www.ave40.com/store/obs-engin...
get a tenderfoot stand!!
www.subtanksupply.com/custom-...
fused Clapton tutorial!
• fused clapton how to w...
my favorite wire to build with!!
humble-wick-wire.myshopify.com/
join to fight for your vaping rights!!
casaa.org/
chasing the fog e liquid! coupon "tjvapes10" for 10 percent off!
www.riverwalkvapors.com/
thank you so much for watching! questions? e mail me at tjvapingreviews@aol.com or simply comment down below! blessings and safe clouds..
This is the 3rd video I've watched from you. Really a good super job. I like your style of making the videos as well...ability to teach a novice yet informative with pro tips. Also your laid back/relaxed attitude with a vapors enthusiasm. DON'T CHANGE UP...GREAT JOB!!!
Mark Elkins thank you so much Mark! I appreciate your kind words and support!
Just wanted to say thank you for the video. I was wicking all wrong I thought for some reason to have the wick hit the bottom. Now this thing is amazing when wicked properly
Thank you brother great build, I just got one today in the mail and follow your instructions. You're the best!!
First of all, thanks for your videos, they are very informative and I love the way you explain everything 👍 I have just used this method on my obs engine moving both coils to the top and your method of wicking. Wow, my engine now feels like a totally different rta😳 I also really enjoyed your vid on the theorem rta, I have one on the way and your vid was much more helpful than others I’ve seen.
I have subscribed and look forward to more. Thanks again Trevor.
Great video. Just picked this up and getting ready to use it.
Thanks for the show. I much enjoyed your attention to detail.
Awsome review /build brother..I'm finally getting one after the holidays.merry Christmas trev
I really like your coil builds and positioning, as well as wicking and priming technique. Everytime my friends were asked about who is your favorite youtuber on vaping tutorials, they quickly says RipTrip, GrimmGreen, TM, Yoc, etc. When I was asked to that same question, I said Trevor Jones. Great work man! See you on the next videos!
Dude!!! That means a lot bro! made my day my friend! Stoked!!
Dude, that was the best tutorial I've ever seen.
Insta-Sub. Thank you. Keep it up.
Great video and tutorial Trevor
the best rta i have ever used no leaks and best flavor ever when wicked properly like in this video.
BEST TANK I HAVE EVER BOUGHT . BUYING FIVE MORE JUST LIKE IT .
Thanks for the tutorial Trevor. I have one coming in a couple of days and can't wait. Really clear and helpful advice. I got the Cheetah a couple of weeks ago and am enjoying that as it is leak proof and no condescension (I like to call it) on the mod.
Dude that's awesome! I hope you enjoy yours as much as I do mine!
You do a great job at explaining and demonstrating every step. Very helpful info thanks!
Sin Nombre your very welcome! thank you for the support and kind words!
awsome brother you remind me of a famous artist "Bob,Ross" your so soft spoken your stile of building is like a kunfu master🏯 i love you brother your one of rhe rwasons i love vaping.
thevapinrecan *awesome *you're *style *Kung Fu * reasons
Here it's for 15.99 USD from EU warehouse (no tax in EU)
www.gearbest.com/rebuildable-atomizers/pp_426548.html?wid=3&lkid=10980009
Enjoy!!!
ruclips.net/video/B7-VhFXcQEU/видео.html
geat video TJ I've bought my but still haven't wicked it up yet, thank you so much info deffo gonna wick mine like you said!
Really enjoyed this video, trevor is the bob ross of building and wicking.
WillieB383 thanks Willie! That means a lot to me bro! Stoked!
Trevor Jones no problem man, after watching this video, i was able to wick my obs engine correctly with no dry hits
awesome Trevor......
great vid man, been a while
another top build 👌
Thanks kabil!
Got problems wicking my obs it floods all the time even i change coils any suggestions on how to get rid of flooding? Thanks
Around 8:30 you smush the ends of the coil legs into back into the posts, i use needle nose plies and just squeeze them in by squeezing the entire post. Then you dont have to put any pressure on the 510 or isolator :)
Excellent video nice one dude 👍
Simon T thanks Simon!
nice wicking tut. i do it similar😊
hi there,
very good tank, with good flavour. if there is someone who is the mind the flavour is not so good, please pull up the wicks nearer the airflow, that´s it.
good channel and very good content.
Merry Christmas, Tom
The Engine is fantastic for the cheap price!
Vanilla Tom Merry Christmas and thanks for watching!!
Dude I think you could have taught Helen Keller to build and wick. Great job man.
lol! Thanks bro!
if my drip tip on my engine gets really hot does that mean i need to raise my coils?
Hi , wy do you only use the top holes of the deck ?
Hi buddy, excellent video - great deal of information for both beginners and experienced vapers alike.
I have a question regarding the positioning of your coils ( apologies if you have already been asked and have answered this already) why is that you place both coils in the top holes of the build deck - does it make a difference in terms of performance or is it more of a "down to personal preference" type thing? I personally am more of a flavour chaser type, and a novice at building... Any advice would be greatly appreciated. Btw your style of videos are awesome - keep up the good work buddy 👍🏾
dutty ness thanks for your awesome comment! well imo no matter what the reviewer and especially me it's always personal preference, I always recommend looking around and getting second or third opinions on build options for all of these different products. in the instance of "top air flow" I ALWAYS do everything I can to lift those coils up to where the air comes in at, using just the top eyelets really gets them up there!! I hope this answers your question, in closing I ALWAYS elevate my coils if possible to the air flow on top feed air atomizers. thanks for your support I truly appreciate it!
At the end of this you said it was leaking and if so, from what, or did you just get juice on your gloves?
Excellent build technigue Trevor. Thanks :) P.S. Thanks for the link for the tendor foot. Been wanting one for 2 years lol cya on final thoughts :)
Thanks Thomas!
i did same but when i puf liqiud coming to my mouth? what's wrong? please help
Great video. I had no idea you could do that! Is it safe?
i looking 4 dis vid,thxs bro...
you so great!!! man
Thanks azzo!
nice always why you do it when you build. it helps to know why to apply to my builds. I hate because I told you so! keep on vaping and building.
thanks bob!
STOKED!
Stoked!
I'm having a problem with muted flavor I won't like to see how the v2 is
Do you have a link to the driptip?
incase anyone loves this tank too much to replace it you can get the screws for it on ali express you get like 50 screws for like $1 US
wow did not know you could place your coils like that... is that safe jw never seen any one do it like that but you, great video man 1st time watching been haveing some wicking issues with my obs well more of a vacum situation i got going on really dont know why but everytime i lift the fill port and suck air threw the channel it soaks the juice, just by lifting my fill port you can see the juice go down.....wierd bro lol
Same problem here too.
hello buddy!! :) great review, thank you
Hi Rhonda! Stoked!
I never check the notch. I just start screwing and it catches the notch any way. I think that was the purpose of it. You don't have to aim. Just slowly rotate without pushing to hard, every thing clicks in place.
Great stuff brother! Was that build kanthal or nichrome?
Trevor Jones what gauge man
Hey man i found something very interesting u should buy the black version i have both 25mm black and silver and they are different the drip tip is not the same and the airflow on the black one is smoother it is very weird i have pics if u want on email to compare :))
Those clippers are huge... I love the engine. I got a nano I put my ss316 fused clappton twisted on it... Best flavor better then the 2 coil.
does somebody know the size of the allen tool? mine was not included when i bought it
it say's 2.5 on the tool he's using
can i get some help ? i got an obs engine black version i can't dissemble it i want to clean it and take the glass off the glass isn't coming off . any ideas ?
H8 I would boil the unit for a few minutes, hopefully that will loosen up the parts that are stuck, it worked for me in the past, hopefully it will for you too.
thanx will try that.
Suggestions on type of coil to use for best flavor.. I like to vape around 75 to 100 watts.. I have a fuchai 200w box. Just purchased the obs engine rta to replace my avocado rdta.. I love it bc its way easier to build. The clapton coils that come with are weak for me.. Any suggestions.. Thanks for your video..
enlightened seeker dude I would go with dual fused Claptons with 26 core and 36,38, or 40 outer! GREAT flavor at 75 watts. should fit really well to, 6 wraps on a 3mm rod.
Trevor Jones thanks but I'm not a dude.. Lol dude
enlightened seeker fair enough please excuse my lingo... good luck and let me know what you think.
Trevor Jones np I was just picking on you.. Thanks I will
I never knew that you could put both coils thru top hole.. Sorry, I've kinda had to teach myself all this along the way.. Dam I've been putting them criss cross utilizing all 4 holes I post.. This is so much better..
Bro am I losing my mind, isn’t your name Trevor lol?? Did you just change the channel name to Michael or something?? Either way man I hope you post a video or at least pop in to a live show chat sometime soon to check in brother. Hey I am the guy u used to talk to about battle rap with all the time, did you get a chance to check out any battles lately?? Anyway hope to hear from you man, the industry needs more people like you right now 👊👊👊👊
WHENS YOURE NEXT VIDEO.?
Where did you get that allan key tool?
JOHNNNYS2 it came with my geek vape tank I believe the Griffin plus rta
Why didnt you use the bottom hole?
To get the coils closer to the airflow and it makes wicking easier too😉
Greg video and build. May I ask why the gloves? Is there a reason for them cheers 😀👍
Also great tip with the nudging the coil slightly when getting um to glow 👍
There is, they help with focus and contrast, until I can get better lightning they will do the trick.
Must say your up close camera is great quality
I love use Avasva Solutions for that issue.
Grub screws o. This thing suck so bad I stripped them so easily ... And everyone has been praising this RTA and so I bought it and it's not as great as everyone or should I say "payed reviewers" said it was...I mean it's a decent RTA but the wicking is not just super simple and you can just wick it anyway you want like people said and it just wicks like a dream... On the contrary... If you use to much it gets choked and to little cotton it spits back in your mouth since its top airflow so it won't leak down... And it still spits back after you refill it for 1st few hits... And the post holes are pretty small on mine about 2mm which is small for a 25mm RTA... I should have got the Griffin 25 plus like my gut told me to... Which I just did order finally... And I ordered the new ADVKEN CP single coil RTA with the pharaoh dripper style clamps ... So hard to find a good all around RTA
Get a T screwdriver like those from geekvape , since i use it i stripped a lot less screws. Hes using one like that.
i hate this tank. mine always floods! urrrgh
If you putt them too short will flood the chamber and you get spitback may even burn your mouth , if they are too long hit the base will get dry hit or lose of flavour , so just put the tank on a mod or base and when you see the cotton from the holes its good , with 2 or 3 trys by try and error you will get the better flavour for your taste, remmenber that its a tank that likes low coils 0.2 to 0.5 works better for me.Bro if you get your perfect wick its one of the best tanks that exist and trust me i try a lot of stuff. ATM 1* tornado nano , 2* OBS Engine and 3* Merlin Mini the rest are other tanks ...Vape on brother :)
Not close to the bottom , close to the holes ...
Bro that tank its very diferent for the subtank , its a subohm RTA , its for very low coils , if you want to go with some high coils try some 24-26gage SS or kanthal and do spaced coils and try it , but remember that this tank works better with lower coils like claptons , fused claptons , tigers some 24 SS its what i think works better, if you want a lower coil you should think about other tank maybe a Serpent Mini or Merlin Mini.GL bruh
Iam wondering why he not vaping the engine? Maybe its leaking with some juice in his mouth?
Nice video, thank you but please don't crate your dog
What happened to u
The Mothman got him...
got the obs and its sum o bull shit see what i done there
Tek bir noktaya 1 değil 2 güç bindiriyor.Böle leri oldukça ve bunların videoları aptalları ele geçirip dediklerini yaptırıdkça daha çok yanmalar patlamalar olur :/