Most of these people know a lot about these cars and are very helpful, and I appreciate what they do, HOWEVER, they don't seem to know anything about making videos. 95% of this video is about looking at all the stuff in his shop, and only a tiny fraction is about seeing what he is doing with the car. The few close-ups are good, but then the camera goes back to wide-angle looking at the whole shop, and you don't see much of anything with the car. At least this one doesn't keep sticking his hands in front of the camera and blocking everything. I'm not saying I know how to make better videos, I don't.
93mph for me, not going to push it any more at least until I can find a better place to run it. CC MambaX, CC 4600kv, 4s. Had to change to the VXL rated wheels and tires after putting in both the pinion and spur speed gears (35/55), and had to use the steel driveshaft. Using the ProtoForm SRS-N, required removing all the rear bumper, it was causing too much drag and would cause the front to start lifting. Motor is smoking after a couple runs, but it was worth the attempt. Keep going for it, each increase is pretty satisfying.
Nice video! Just got my 4tec Vxl yesterday it’s insanely fast. I already burnt my tires out lost 2 dog bones and Burt out the stock spur gear?! Wtf lol the dog bones were because my neighbor was diving and literally hit my 4tec with her car. I was so pissed lol. All that in one day!
I'm converting a brushed 4tec 2.0 into the vxl-3s system. The brushed comes with a 70t spur and 21t pinion. Is that an acceptable ratio for slightly oversized off road wheels, and if not will smaller pinions help?
Need some help on how to keep my 4tec from getting squirrelly when I give it full throttle. It’s brand new out the box. Iv done a couple different spring setups as fast as making them tighter but it still does it.
Yooo whats up man im a big fan i watch all your videos love the races.....its been 10months since this video and im looking into trading a arrma typhon 3s for the same one....do you still have it also is there any weak points on the car?
man if I was afraid to do any of that before I really am now it don't look like you know what you're doing with all the Traxxas connections behind you and why can't they make it easier
Damn mark they got balls to ask you for your GoPro who the hell are they I mean I love giveaways even though I never win them LOL but they have no right to ask you for your stuff f these bums
is this chassis considered a 200mm? I recently found a 1968 Cougar body, which I have had a real one since 1988, and would like to build an RC version of it, but the description for the body says it is for a 200mm chasis, but have not been able to find much information for those. Thanks for the help!
I sold my erevo 2.0 for $485! Is that good or no. I had a castle system in there and 3 sets of tires. Did I do good? How much can I sell my slash 4x4 with lots and lots of upgrades? The slash is 2 years old with original esc,and servo.
485 isnt bad but the castle system is worth more the stock in my opinion. Im about to post a video on the final numbers of my Rustler 4x4. Slash 4x4 should get about the same.
Most of these people know a lot about these cars and are very helpful, and I appreciate what they do, HOWEVER, they don't seem to know anything about making videos. 95% of this video is about looking at all the stuff in his shop, and only a tiny fraction is about seeing what he is doing with the car. The few close-ups are good, but then the camera goes back to wide-angle looking at the whole shop, and you don't see much of anything with the car. At least this one doesn't keep sticking his hands in front of the camera and blocking everything. I'm not saying I know how to make better videos, I don't.
93mph for me, not going to push it any more at least until I can find a better place to run it. CC MambaX, CC 4600kv, 4s. Had to change to the VXL rated wheels and tires after putting in both the pinion and spur speed gears (35/55), and had to use the steel driveshaft. Using the ProtoForm SRS-N, required removing all the rear bumper, it was causing too much drag and would cause the front to start lifting. Motor is smoking after a couple runs, but it was worth the attempt.
Keep going for it, each increase is pretty satisfying.
I think i may have hit the limit on a 3s vxl. It may be time to upgrade
Nice video! Just got my 4tec Vxl yesterday it’s insanely fast. I already burnt my tires out lost 2 dog bones and Burt out the stock spur gear?! Wtf lol the dog bones were because my neighbor was diving and literally hit my 4tec with her car. I was so pissed lol. All that in one day!
Best Vlogs on YT
Sweet Video ! Thanks Sir!
Thanks for the help
@5:45. That's my favorite one to use.
scursion07 lmao! The ole B hole.
My question to you is.... how long do rubber tires usually last you on the 4tec?
I'm converting a brushed 4tec 2.0 into the vxl-3s system. The brushed comes with a 70t spur and 21t pinion. Is that an acceptable ratio for slightly oversized off road wheels, and if not will smaller pinions help?
What tires do you recommend for a 4tec 3.0 that will give it proper fitment I’m running the traxxas vxl with the high speed gear
What is the body frame for the orange one
do you ever drive these cars or like...? like film them so we can see?
Watching these videos makes me think i burned out of rc by just racing and not having fun bashing. Always at the track wears you out.
BIG TIME! That's why i do it.
Need some help on how to keep my 4tec from getting squirrelly when I give it full throttle. It’s brand new out the box. Iv done a couple different spring setups as fast as making them tighter but it still does it.
What you doing speedruns or just bashing around?
Yooo whats up man im a big fan i watch all your videos love the races.....its been 10months since this video and im looking into trading a arrma typhon 3s for the same one....do you still have it also is there any weak points on the car?
man if I was afraid to do any of that before I really am now it don't look like you know what you're doing with all the Traxxas connections behind you and why can't they make it easier
I know this is an old video but do you have an email address I can send pics of my all out 106mph 4tec 2.0 build. Would love to hear your thoughts.
Damn mark they got balls to ask you for your GoPro who the hell are they I mean I love giveaways even though I never win them LOL but they have no right to ask you for your stuff f these bums
I have a ? To ask you bro Did the Gears mash and did you fix not stopping
is this chassis considered a 200mm? I recently found a 1968 Cougar body, which I have had a real one since 1988, and would like to build an RC version of it, but the description for the body says it is for a 200mm chasis, but have not been able to find much information for those. Thanks for the help!
Been a while but yes the 2.0 is a 200mm car.
What is the difference between the 2.0 and the 2.0VXL?
The normal 2.0 is brushed and slower, while the VXL 2.0 is brushless and goes much faster.
I sold my erevo 2.0 for $485! Is that good or no. I had a castle system in there and 3 sets of tires. Did I do good? How much can I sell my slash 4x4 with lots and lots of upgrades? The slash is 2 years old with original esc,and servo.
485 isnt bad but the castle system is worth more the stock in my opinion. Im about to post a video on the final numbers of my Rustler 4x4. Slash 4x4 should get about the same.
Im hitting 64 mph with a 19t pinion and 54 t spur in my slash with the vxl system you should be going way faster try a 50 t spur with your pinion
How can u tell if its a 2 pole and 3 pole
The wires are different. I can't remember but I think the 2 pole has braided shielding over the wires and the 4 pole has smooth black.
The "B" holes?
Dammit, beat me to it
lol... B Holes!
Kind of lame...