@@BUILTLIGHTWOUNDTIGHT yeah I'm taking it back first thing in the morning brother it literally doesn't want to go forward when I put the casing protection over the gears and I can force it but like you said it will smoke out the motor and ESC thanks for the help
The reason it's going so fast in reverse is cuz there is shorter area two for the trigger to go back meaning that accelerates faster but that's all in the remote
Attempted Comedy gives you the correct gear mash. Smaller gears have to be closer to have good contact and bigger gear on the motor would have to be farther away for gear mash. The motor mount is used to adjust the motor from left to right
Thank you so much Traxxas Support. This video made it a breeze.
👍
@@TraxxasSupport will you make a trx4 sport body for the trx4m
That's just beautiful. I never knew that this type of chassis existed!!
Im so buying this car this spring when it warms up, its sooo beautiful, i love the chassis lay out and everything
To see it done makes it so much easier. Thank you.
However, this car is fast enough stock : ) Maybe one day.
I have a GT40 with telemetry expander, please make a support video on installing telemitry sensors
Tolles Video 👍
is this the same as the 30mph ones?
What should I change the motor mount screws to? I'm using 35/55
Also the pin went flying.
35 motor pin , 55 gear ???
Xo-1 overview plz plz traxxas
Hello greetings can I change the Pinion of the engine only, and the other leave it from the factory?
Alexis Lobo, yes you should be able to, sorry if I’m wrong lol
You would be able to, but you would want to re mesh the gears.
@@Cool_bloke_96 what should you set it to then?
Does that work with mustang one
Yes
We could use screew hun ?
Which are the pinions and spur gears included in box of VXL car ?
Thanks
Helps a lot
Hey Traxxas! Can you make a how to go faster on the 4-tec 2.0?
Do you really need it?
Yeah, I already have gotten used to the brushed system in my 4-tec. I replaced the tq with a TQi. But most importantly
I’m really, really lazy
@@Dual-57 Is it that difficult to swap out a motor?!?!
@@RC-ty5ym i was like 11 when i made this comment so yea i’m pretty sure i needed it lol
35-55, 1.57:1 is this the lowest ratio the 4TEC can run ?
Nope it can run lower just will cause more heat
And the guy at the hobby shop sold me 55-36 assuring it would work but it doesn't
@@FIRSTCLASSLEGENDZ I would take the Pinion back and get a 35T or a little smaller one, so you can still run it.
44-55 is the maximum gearing for the 2.0, but this gearing would smoke an esc or motor very quickly!
@@BUILTLIGHTWOUNDTIGHT yeah I'm taking it back first thing in the morning brother it literally doesn't want to go forward when I put the casing protection over the gears and I can force it but like you said it will smoke out the motor and ESC thanks for the help
Grease on differentials or no grease?
A rule of thumb on metal parts is to avoid adding grease or oil
You got that backwards. You do put oil/grease on metal parts. So yes put grease on the diffs
I can’t get the screw to unscrew on the gear where the motor is. The tiny one where the gear is being hold. Can anyone help me?
Did u ever get it loose?
shouldt you check the spur mesh?
i think 0:43-0:58 covers that
The motor plate has it set already for each gear setting just change it to correct letter for certain gears
is there a problem running the stock pinion gear wit a 3 s battery at foul l speed? 29t/70t??
That's the biggest pinion you can run with the 70Tooth spur.
Idk why im watching i only have a bandit
Kevin Rhodes I only gota slash
Because Traxxas is awesome
I have traxxas summit,hpi e firestrom 10t fluxx and waverunner
My Traxxas slash vxl 2wd is fast but will it go faster on 70/30 on transmiter couse when i turn tu 70/30 it will go reverse so fast so?
No, it won't.
The reason it's going so fast in reverse is cuz there is shorter area two for the trigger to go back meaning that accelerates faster but that's all in the remote
What does moving the motor mounting plate do
Attempted Comedy gives you the correct gear mash. Smaller gears have to be closer to have good contact and bigger gear on the motor would have to be farther away for gear mash. The motor mount is used to adjust the motor from left to right
Does this work for the new E Revo 2.0
Dkh Sports and Games ....really.... There 2 different cars
Dkh Sports and Games I wouldn’t think so judging on size alone
How do u install sway bars on this vehicle
whats the little blue plastic?
What is faster 35/55 or 30/70?
DJD 217 35/55
Cozii top speed wise. 30/70 gives you faster acceleration
Uhh can not get the berring off
Replace that bad boy
If you wanna go 70mph I would NOT install plastic spurs and pinions LOL
Still I want first always number one ☝️
Hang on, why do they give you crappy Allen wrenches but they use nice cool wrenches, kinda weird? Make them suffer the pain of using Allen wrenches
Just like how 1:1 car manufacturers give you a crappy lug nut wrench instead of a nice telescopic 1/2" ratchet.
🤭
My 3.0 is faster. 92mph 2s battery
6th
I’m second subscriber yassssss
Third :D
That’s ghetto AF!
How ?